Fri, Mar 6
13:00 - 14:35 |
| |
13:00-13:05 |
opening address ( 5 min. ) |
| (1) |
13:05-13:20 |
Analytical study for copper surface and aluminum oxide films
-- Copper and alminium -- |
Tatsuya Abe, Osamu Atsumi, Isao Minowa (Tamagawa Univ.) |
| (2) |
13:20-13:35 |
Consideration for the measurement methods to high quality resistors |
Isao Minowa, Naoyuki Tanioka (Tamagawa Univ.) |
| (3) |
13:35-13:50 |
Transmission Function Analysis on Model Rolling Mill Motor Drive System Feedback Control by Super Position of White Noise to Speed Reference Signal the second report
-- Considering Student Experiment Application -- |
Masanori Sugimoto, Tomohiro Yamaguchi, Toshifumi Tamaoki, Makoto Takanezawa, Noboru Morita (Nippon Inst. of Tech.) |
| (4) |
13:50-14:05 |
Development of 5-inches Model Electric Locomotive for Track Pitching Study & Sequence Control Education the second report
-- for both Practical Research & Open Campus Presentation -- |
Akiyoshi Kawamata, Yuta Kurokawa, Yasuyuki Tadaka, Takeshi Noda, Lu Zijun, Takeshi Watanabe, Makoto Takanezawa, Noboru Morita (Nippon Inst. of Tech.) |
| (5) |
14:05-14:20 |
Investigation of Environments for Connectors on Vehicle |
Jin Hirabayashi, Yasushi Saitoh, Terutaka Tamai, Kazuo Iida (Mie Univ), Yasuhiro Hattori (AutoNetworks Technologies, Ltd.) |
| (6) |
14:20-14:35 |
Load - Resistance Characteristics of Contact Materials for Automobile Connectors |
Takuya Yamanaka, Masaru Iko, Tatuya Nagase, Yasushi Saitoh, Terutaka Tamai, Kazuo Iida (Mie Univ.), Yasuhiro Hattori (AutoNetworks Technologies, Ltd.) |
| |
14:35-14:50 |
Break ( 15 min. ) |
Fri, Mar 6
14:50 - 16:20 |
| (7) |
14:50-15:05 |
A study of W-Fe-based Composite Materials for Sliding Contacts Containing Solid Lubricants |
Masaomi Arai, Yoshitada Watanabe (Kogakuin Univ.) |
| (8) |
15:05-15:20 |
Measurement of arc duration and contact resistance of breaking contact mounted in relay. |
Kazuki Yoshida, Kiyoshi Yoshida (Nippon Inst. of Tech.) |
| (9) |
15:20-15:35 |
Duration of Arc Discharge at Constant Gaps and the Minimum Arc Current |
Minori Watanabe, Keiichi Suhara (Tokyo National Coll. of Tech.) |
| (10) |
15:35-15:50 |
Development of undressing detection system of uniforms by human body communication. |
Akinori Kondo (Tokyo Metropolitan Coll. of Ind Tech.), Sayumi Kamata (Tokyo Metropolitan Coll. of Aeronautical Engineering), Masaki Fujikawa (Chuo Univ.), Kenji Furusawa (Mitsuya Lab.), Masakatsu Nishigaki (Shizuoka Univ.), Masasumi Yoshizawa (Tokyo Metropolitan Coll. of Ind Tech./Tokyo Metropolitan Coll. o) |
| (11) |
15:50-16:05 |
Simulation study of analog input buffer characteristics in CMOS integrated circuits |
Yuuto Horiki, Keiko Fukuda (Tokyo Metropolitan Coll. of Ind Tech.) |
| (12) |
16:05-16:20 |
An experimental tool for visually observing electromagnetic induction phenomena and observation with a high-speed camera |
Asuka Sudo, Muneki Kawahara, Yusuke Takahashi, Makoto Hasegawa (Chitose Inst. of Scie & Tech.) |
| |
16:20-16:35 |
Break ( 15 min. ) |
Fri, Mar 6 PM
16:35 - 17:50 |
| (13) |
16:35-16:50 |
Growth Law of the Oxide Film Formed on the Tin Plated Contact Surface and Its Contact Resistance Characteristic
-- Ellipsometric Study -- |
Yuya Nabeta, Terutaka Tamai, Yasushi Saitoh, Shigeru Sawada, Kazuo Iida (Mie Univ.), Yasuhiro Hattori (AN Technorogies) |
| (14) |
16:50-17:05 |
Effect of liquid paraffin for fretting corrosion |
Masaki Nonogawa, Daiji Ito, Yasushi Saitoh, Terutaka Tamai, Kazuo Iida (Mie Univ), Yasuhiro Hattori (AutoNetworks Technologies.LTD.) |
| (15) |
17:05-17:20 |
Analysis on Contact Surface by FEM |
Hiroki Ryobuchi, Hironori Karube, Atsuo Suzuki, Tetsuya Komoriya, Noboru Morita, Takahiro Ueno (Nippon Inst. of Tech.) |
| (16) |
17:20-17:35 |
A Study on Motor Production using Earth Magnetism |
Satoshi Nishizawa, Ryosuke Funaki, Isao Tsukabayashi, Noboru Morita, Takahiro Ueno (Nippon Inst. of Tech.) |
| (17) |
17:35-17:50 |
Analysis of defects in reinforced concrete using microwave reflection |
Atsushi Kuwana, Toshitatsu Suzuki, Noboru Morita (Nippon Inst. of Tech.) |
| |
- |
|
: 
p
n
k
w