===============================================
Technical Committee on Component Parts and Materials (CPM)
Chair: Yasushi Takano (Shizuoka Univ.) Vice Chair: Satoru Noge (Numazu National College of Tech.)
Secretary: Tomomasa Sato (Kanagawa Univ.), Junichi Kodate (NTT)
Assistant: Nobuyuki Iwata (Nihon Univ.), Takashi Sakamoto (NTT)
DATE:
Fri, Oct 24, 2014 11:00 - 18:00
Sat, Oct 25, 2014 09:20 - 12:40
PLACE:
TOPICS:
----------------------------------------
Fri, Oct 24 AM (11:00 - 18:00)
----------------------------------------
(1) 11:00 - 11:20
Fabrication of ultra-thin metal oxide nanosheets as a carrier selective layers and their application for bulk-heterojunction organic solar cells
Yoshinori Goto, Yusuke Saka, Eiji Itoh (Shinshu Univ.)
(2) 11:20 - 11:40
Performance of carbon nanotubes with carbyne in the hollow core as an anode material for lithium ion battery
Cheonsoo Kang, Yongil Ko, Sho Inahata, Shun Takagi, Yuki Yamazaki, Hiroki Hiraide, Hiroki Maegawa, Hiroyuki Muramatsu, Takuya Hayashi (Shinshu Univ.)
(3) 11:40 - 12:00
Electrochemical evaluation of carbon materials prepared in supercritical water medium as anodes of lithium ion batteries
Hideaki Tanaka, Ryohei Sugamata, Takuya Hayashi (Shinshu Univ.)
----- Lunch ( 60 min. ) -----
(4) 13:00 - 13:20
Analysis of adsorption state of organic ions in nitrogen-doped carbon materials by density functional theory.
Tomoaki Sugisawa, Daisuke Iwakiri, Yuki Inden, Yuki Matsui, Yoshiki Kajiura, Yoshiya Tanaka, Takuya Hayashi, Hiroyuki Muramatsu (Shinshu Univ.)
(5) 13:20 - 13:40
A Study of BCN production process by thermal chemical vapor deposition
Yuki Yamazaki, Takuya Hayashi, Hiroyuki Muramatsu (Shinshu Univ)
(6) 13:40 - 14:00
The introduction of the band gap with hexagonal boron nitride for graphene
Sho Inahata, Shun Takagi, Yuki Yamazaki, Hiroki Hiraide, Hiroki Maegawa, Takuya Hayashi, Hiroyuki Muramatsu (Shinshu Univ.)
----- Break ( 20 min. ) -----
(7) 14:20 - 14:40
The Development of Hot-Wall Chemical Vapor Deposition Equipment with Structural System for Laser Irradiation, and Preparation of Carbon Nanotubes
Daiki Kawaguchi, Yusaku Tsuda, Keisuke Yoshida, Tomoko Nagata, Nobuyuki Iwata, Hiroshi Yamamoto (Nihon Univ.)
(8) 14:40 - 15:00
Behavior of Pt Particles Deposited on Cup Stacked Carbon Nanotubes
-- The Effect of Solvent-Coating --
Yuuki Matsui, Daisuke Iwakiri, Tomoaki Sugisawa, Yuki Inden, Takuya Hayashi, Hiroyuki Muramatsu (Shinshu Univ.)
(9) 15:00 - 15:20
Study of structural control of GNR by heating with a PTCDA
Daisuke Iwakiri, Tomoaki Sugisawa, Yuki Inden, Yuki Matsui, Takuya Hayashi, Hiroyuki Muramatsu (Shinshu Univ.)
(10) 15:20 - 15:40
Effect of Post-Deposition Annealing in Hydrogen Atmosphere on 4H-SiCMIS Property Prepared by Thermal CVD Method Using Tetraethylorthosilicate
Takuo Kanou, Yoshiyuki Akahane, Yuta Kobayashi, Tomohiko Yamakami, Kiichi Kamimura (Shinshu Univ.)
(11) 15:40 - 16:00
Growth of 3C-SiC films on graphite by HW-CVD method
Katsuya Abe, Takahiro Nakamura, Kenta Ito, Kouki Suzuki (Shinshu Univ.)
----- Break ( 20 min. ) -----
(12) 16:20 - 16:40
Chemical solution deposition of SnS in a flow cell
Yuuki Yamanaka, Yohei Kanemori, Yasushi Takano, Akihiro Ishida (Shizuoka Univ)
(13) 16:40 - 17:00
Optimization of Growth Condition and Electric/Magnetic Properties of CaFeOx, LaFeO3 Films and [CaFeOx/LaFeO3] Superlattice
Keisuke Oshima, Yuta Watabe, Takahiro Oikawa, Takaaki Inaba, Huaping Song, Tomoko Nagata, Takuya Hashimoto, Kouichi Takase, Hiroshi Yamamoto, Nobuyuki Iwata (Nihon Univ.)
(14) 17:00 - 17:20
Characterization of Cu-Al oxide films deposited by sputtering method using Cu/Al composit target
Katsuya Abe, Kazuki Hayashida (Shinshu Univ.)
(15) 17:20 - 17:40
Imaging method of temperatur distribution in Bi-2212 intrinsic Josephson junction stacks by double-sided fabrication
Tsubasa Nishikata, Yukio Kotaki, Takahiro Kato, Takayuki Ishibashi, Kanji Yasui (Nagaoka Univ. of Tech.)
(16) 17:40 - 18:00
Silicidation reaction in Ni/Si system with thin interposed SiO2 layer
Atsushi Noya, Mayumi B. Takeyama (Kitami Inst. Technol.)
----------------------------------------
Sat, Oct 25 AM (09:20 - 12:40)
----------------------------------------
(17) 09:20 - 09:40
Barrier properties of Zr3N4 insulating films deposited at low temperatures
Masaru Sato, Mayumi B. Takeyama, Atsushi Noya (Kitami Inst. of Tech.)
(18) 09:40 - 10:00
Characterization of low-temperature deposited SiNx films applicable to 3D/2.5D-IC
Mayumi B. Takeyama, Masaru Sato (Kitami Inst. of Tech.), Yasushi Kobayashi, Yoshihiro Nakata, Tomoji Nakamura (FUJITSU LAB.LTD.), Atsushi Noya (Kitami Inst. of Tech.)
----- Break ( 20 min. ) -----
(19) 10:20 - 10:40
Characterization of the electric double layer capacitor as a starting material a polysaccharide thickener
Hiroyuki Taira, Tomoaki Ishida, Masashi Machida, Naoto Kanayama, Kensaku Kobayashi, Takuya Hayashi, Hiroyuki Muramatsu (Shinshu Univ.)
(20) 10:40 - 11:00
Application of Cup-stacked carbon nanotubes for Electric Double Layer Capacitor
Masashi Machida, Tomoaki Ishida, Naoto Kanayama, Kensaku Kobayashi, Hiroyuki Taira, Yoshihiro Kunieda, Syouhei Nunohiro, Takuya Hayashi, Hiroyuki Muramatsu (Shinshu Univ.)
(21) 11:00 - 11:20
Evaluation of activated carbon prepared from a material derived from agar for the application to EDLC electrodes
Tomoaki Ishida, Masashi Machida, Naoto Kanayama, Kensaku Kobayashi, Hiroyuki Taira, Yoshihiro Kunieda, Syouhei Nunohiro, Takuya Hayashi, Hiroyuki Muramatsu (Shinshu Univ.)
----- Break ( 20 min. ) -----
(22) 11:40 - 12:00
Study on Reducing Energy for Thermomagnetic Recording of Magneto-optic Three Dimensional Display with Amorphous RE-TM Thin Film
Aki Nemoto, Kazuki Matsugami, Kazuki Nakamura, Taichi Goto, Hiroyuki Takagi, Pang Boey Lim, Mitsuteru Inoue (TUT)
(23) 12:00 - 12:20
Study on Multi-valued Magneto-optic Three-dimensional Display with Magnetic Garnet Film
Sotaro Tsuda, Kazuki Nakamura, Taichi Goto, Hiroyuki Takagi, Pang Boey Lim, Mitsuteru Inoue (TUT)
(24) 12:20 - 12:40
Development of thin inductors for DC-DC convertor in LSI package-level DC power grid
Yuichiro Yazaki, Yuta Kondo, Kazuma Ishidate, Kazuhiro Hagita (Shinshu Univ.), Tetsuro Watanabe, Yuto Seino (Tokyo Inst. of Tech.), Makoto Sonehara, Toshiro Sato (Shinshu Univ.), Nobuhiro Matsushita (Tokyo Inst. of Tech.)
# Information for speakers
General Talk will have 15 minutes for presentation and 5 minutes for discussion.
=== Technical Committee on Component Parts and Materials (CPM) ===
# FUTURE SCHEDULE:
Wed, Nov 26, 2014 - Fri, Nov 28, 2014: B-ConPlaza [Sun, Sep 7], Topics: Design Gaia 2014 -New Field of VLSI Design-
Thu, Nov 27, 2014 - Fri, Nov 28, 2014: [Mon, Sep 15]
Last modified: 2014-10-23 09:22:59
|
Notification: Mail addresses are partially hidden against SPAM.
|