Thu, Oct 29 PM 13:20 - 18:00 |
(1) |
13:20-13:45 |
New Optical Fibre Line Testing System Function for Facility Location and Identification Using Multivalued Brillouin Frequency Shift Assigned Fibre |
Nazuki Honda, Masaaki Inoue, Noriyuki Araki, Yuji Azuma (NTT) |
(2) |
13:45-14:10 |
Optical-fiber distribution management system using LED navigation and visible light communication technologies |
Masaki Waki, Shigenori Uruno, Yoshitaka Enomoto, Yuji Azuma (NTT Corp.) |
(3) |
14:10-14:35 |
Gigabit Transmission Characteristics with Step-Index Hard Polymer Cladding Fiber Cord |
Takamitsu Aiba, Tomohiro Wakabayashi, Shin-ichi Furukawa (YAZAKI), Yahei Koyamada (Ibaraki Univ.) |
|
14:35-14:50 |
Break ( 15 min. ) |
(4) |
14:50-15:15 |
Development of small diameter optical fiber cord for indoor wiring |
Syuichi Kusunoki, Takaharu Kinoshita, Masayoshi Hachiwaka, Masatoshi Tanaka, Haruo Ohizumi (Mitsubishi Cable) |
(5) |
15:15-15:40 |
A study of the optical fiber sheet. |
Shogo Ikunishi (Mitsubishi Cable) |
(6) |
15:40-16:05 |
The Study on Large Mode Area Holey Fiber |
Kazumasa Ohsono, Bing Yao, Akira Ogura, Hiroyuki Ohkubo, Akihito Hongo (Hitachi Cable,Ltd.) |
(7) |
16:05-16:30 |
Ultra Low Nonlinear Telecom Fibre by Hole Assisted Technique |
Iwao Shimotakahara, Naomi Kumano, Yu Mimura, Ryuichi Sugizaki, Takeshi Yagi (Furukawa Electric) |
|
16:30-16:45 |
Break ( 15 min. ) |
(8) |
16:45-17:10 |
Theoretical Study of Stress-induced Group Delay Variation in Hole Assisted Fibers |
Norio Kashima (Shibaura Inst. of Tech.) |
(9) |
17:10-17:35 |
Estimation of the bending loss induced by arbitrary bending directions of holey fibers having a core consisting of an elliptical-hole lattice |
Masashi Eguchi (Chitose Inst Sci and Tech.), Yasuhide Tsuji (Kitami Inst. of Tech.) |
(10) |
17:35-18:00 |
Improvement of accuracy in equivalent-index analysis with 1D FEM |
Kazuto Haatase, Masashi Eguchi (Chitose Inst. of Science and Tech.) |
Fri, Oct 30 AM 09:00 - 11:45 |
(11) |
09:00-09:25 |
Mechanical splice loss characteristics for hole assisted fiber |
Kotaro Saito, Ryo Koyama, Yoshiteru Abe, Kazuhide Nakajima, Toshio Kurashima (NTT Corp.) |
(12) |
09:25-09:50 |
Environmental Durability of Optical Connector Parts |
Eiji Yoneta, Shuichi Yanagi, Morihiko Matsumoto (NTT East) |
(13) |
09:50-10:15 |
Development of optical modules using optoelectronic ferrules |
Wataru Sakurai, Tooru Nakanishi, Mitsuaki Tamura (Sumitomo Electric Industries, LTD.) |
|
10:15-10:30 |
Break ( 15 min. ) |
(14) |
10:30-10:55 |
Study of Fiber Skew in SDM-WDM Parallel Transmission Systems |
Norio Kashima (Sibaura Inst. of tech.) |
(15) |
10:55-11:20 |
Group Velocity Dispersio Measurement Method Using Sinusoidally Phase-Modulated Light |
Takashi Yamamoto, Taiji Sakamoto, Kenji Kurokawa, Shigeru Tomita (NTT Corp.) |
(16) |
11:20-11:45 |
Photodarkening in Ytterbium-Doped Silica Fibers |
Tomofumi Arai, Kentaro Ichii, Shoji Tanigawa, Shoichiro Matsuo (Fujikura) |
|
11:45-13:15 |
Lunch time ( 90 min. ) |
Fri, Oct 30 PM 13:15 - 14:55 |
(17) |
13:15-13:40 |
Coupling Characteristic Adjustment of Photonic Crystal Fiber Coupler Using Air Hole Control with CO2 Laser Irradiation |
Hirohisa Yokota, Yuu Nakajima, Tomoya Ichige, Yoh Imai, Yutaka Sasaki (Ibaraki Univ.) |
(18) |
13:40-14:05 |
Changes in Polarization and Wavelength Dependences of Fused Fiber Couplers Induced by the Cross Sectional Shape of the Coupling Region |
Makoto Kawabata, Kazunori Yamazaki, Katsumi Morishita (Osaka Electro-Comm. Univ.) |
(19) |
14:05-14:30 |
Expanding Blue Shift on Post-Fabrication Resonance Wavelength Adjustment of Long-Period Fiber Gratings by Heating |
Fatemeh Abrishamian, Katsumi Morishita (Osaka Electro-Comm. Univ.) |
(20) |
14:30-14:55 |
Characterization of optical combiner spliced with air hole type multimode fiber |
Masatoshi Tanaka, Hisashi Sawada, Seong-Jin Kim, Tomohiko Ishida, Tetsuya Yamamoto, Masahiro Kotoh, Hirokazu Taniguchi (Mitsubishi Cable) |