Fri, Mar 7 PM
13:00 - 17:30 |
| |
13:00-13:05 |
( 5 min. ) |
| (1) |
13:05-13:20 |
Research on the sliding contact of the silver graphite using by silver coating slipring |
You Ishino, Takagi Daichi, Mifuyu Fuchimoto, Koichiro Sawa, Takahiro Ueno (Nippon Inst. of Tech.) |
| (2) |
13:20-13:35 |
Excitation method of the inner conductor of an connector-assembled coaxial cable in the standing wave coaxial tube PIM measurement method |
Ming Wang, Nobuhiro Kuga (Yokohama Nat'l Univ.) |
| (3) |
13:35-13:50 |
Effect of viscosity and component of contact oil on contact resistance |
Fumitaka Teraoka, Kazuo Iida (Mie Univ.), Shigeru Sawada (ANTech) |
| (4) |
13:50-14:05 |
Measurement of oxygen metabolism and blood volume changes due to the contraction and relaxation of the muscles by near-infrared spectroscopy |
Kentarou Kojima, Keiko Fukuda (TMCIT) |
| (5) |
14:05-14:20 |
The simulation a different metal configuration changes in multi-point |
Eisuke Enomoto, Yu Kodama, Keisuke Fukuda, Yusuke Yanagi, Yoshitada Watanabe, Masaomi Arai (Kogakuin Univ) |
| |
14:20-14:30 |
Break ( 10 min. ) |
| (6) |
14:30-14:45 |
Brush and commutator wear in ethanol of DC motor used in automotive fuel pump |
Daiki Sato, Michihiro Sato, Koichiro Sawa, Takahiro Ueno (Nippon Inst. of Tech.) |
| (7) |
14:45-15:00 |
Effect evaluation of matching condition at a PIM frequency in PCB-PIM mesurements using the standing wave coaxial tube method |
Hironao Hanajima, Nobuhiro Kuga (Yokohama Nat'l Univ) |
| (8) |
15:00-15:15 |
Current dependency characteristics on the slew sliding test ofWS2/W based composite material contacts |
Kento Matsukura, Mitsuhiro Murano, Yoshitada Watanabe (Kougakuin Univ) |
| (9) |
15:15-15:30 |
Study on multi-channel signal processing method for brain function measurement by near-inferred spectroscopy |
Akira Takao, Keiko Fukuda (TMCIT) |
| |
15:30-15:40 |
Break ( 10 min. ) |
| (10) |
15:40-15:55 |
Measurement of the contact resistance behavior of oxidizing metal and non-oxidizing metal |
Yudai Tasaki, Masato Fukuno, Takahiro Ueno, Koichiro Sawa (Nippon Inst. of Tech.) |
| (11) |
15:55-16:10 |
A study on the velocities and currents dependency for high-speed sliding test using WS2/W and Ni/C-BN based composite materials |
Hiroya Yoshida, Ayumu Sekizawa, Yoshitada Watanabe (Kogakuin Univ.) |
| (12) |
16:10-16:25 |
A basic consideration of optimum sample size in the non-contact two-tone PIM test for printed circuit board using the standingwave coaxial tube method |
Shutaro Tokunaga, Kumiko Morita, Nobuhiro Kuga (Yokohama Nat'l Univ.) |
| (13) |
16:25-16:40 |
Various characteristics of electromagnetic contactor using silver nickel alloy contacts
-- Influence of nickel content -- |
Shunsuke Nozaki, Kazuya Hatanaka, Koichiro Sawa, Kiyoshi Yoshida (Nippon Inst. of Tech.) |
| |
16:40-16:50 |
Break ( 10 min. ) |
| (14) |
16:50-17:25 |
[Special Talk]
Electrical Contacts and Intermodulation Distortion : Looking back now on failures and successes |
Isao Minowa (Tamagawa Univ.) |
| |
17:25-17:30 |
Break ( 5 min. ) |
: tj
k
ipc
-
t
