| number |
title/author |
| 2WC1-1 | Printed WWAN Coupled-Fed Loop Antenna Closely Integrated with Nearby System Ground Plane for Mobile Phone Application
Ting-Wei Kang, Wei-Yu Chen, Kin-Lu Wong, |
| 2WC1-10 | The Radiation Characteristics of a Linear Phased Array Antenna using Inductor Loaded Patch Antennas
Tae-Young Kim, Gun-Su Kim, Boo-Gyoun Kim, |
| 2WC1-11 | Polarization switching of ring microstrip antennas fed by an L-probe with PIN diodes
Kenta Yamaura, Yuichi Kimura, Misao Haneishi, |
| 2WC1-12 | Analysis of Electrodes for Body-Centric Communications
Nozomi Haga, Kazuyuki Saito, Masaharu Takahashi, Koichi Ito, |
| 2WC1-13 | Simple Selection Method by the Second Eigenvalue in Indoor 2×2 MIMO System
Mitsuki SAGARA, Daisuke UCHIDA, Hiroyuki ARAI, |
| 2WC1-14 | A 2.45GHz band Passive RFID system using a single wire transmission line
Toru Suzuki, Shigeki Obote, Kenichi Kagoshima, |
| 2WC1-15 | Heating Performance of Loop Antenna for Microwave Thermal Therapy by Combination of HIFU Treatment System
Samon Ishikawa, Kazuyuki Saito, Masaharu Takahashi, Koichi Ito, |
| 2WC1-16 | Design of a linearly-polarized radial line slot antenna with reflection-cancelling posts
Ken Saeki, Hideki Ueda, Jiro Hirokawa, Makoto Ando, |
| 2WC1-17 | An Adaptive Evaluation Method of Material with Complex Permittivity in a Cylindrical Cavity
N. Nakao, Y. Morishita, K. Wakino, T. Kitazawa, |
| 2WC1-18 | A Three-Port Integrated Dual Band Filter-Antenna Module
Li Yang, Pedro Cheong, Wai-Wa Choi, Kam-Weng Tam, |
| 2WC1-19 | An Integrated Open-Loop Resonator Bandpass Filter-Slot Antenna with Stopband Improvement
Wen-Yao Zhuang, Pedro Cheong, Wai-Wa Choi, Kam-Weng Tam, |
| 2WC1-2 | Efficient Modeling of a Small Reverberation Chamber Using FDTD Method
SoonGyu Yi, Ki-Bok Kong, Jung-Hwan Choi, Jung-Ick Moon, Seong-Ook Park, |
| 2WC1-20 | Interpolating Multilevel Green’s Function with Radial Basis Function and Phase Compensation
Peng Zhao, Chi Hou Chan, |
| 2WC1-3 | Application of Impedance Extension Method to 2D Large-scale Periodic Array Antenna with Faulty Elements
Keisuke Konno, Qiang Chen, Kunio Sawaya, Toshihiro Sezai, |
| 2WC1-4 | Adding Dense Multipath Components to Geometry-Based MIMO Channel Models
Juho Poutanen, Fredrik Tufvesson, Katsuyuki Haneda, Lingfeng Liu, Claude Oestges, Pertti Vainikainen, |
| 2WC1-5 | 13.56 MHz-RFID Antenna Fabricated with Metal Layer of Standard CMOS Process for Biosensor Applications
Boram Kim, Shigeyasu Uno, Kazuo Nakazato, |
| 2WC1-6 | Numerical Solution for Transient Scattering by Uniformly Moving Targets
S. Q. Jia, X. M. Jiang, M. Y. Xia, |
| 2WC1-7 | Design of a MIMO Antenna with an Inductor Loaded Neutralization Line for Wireless Communications
Changho Lee, Juman Kim, Minseok Han, Jaehoon Choi, |
| 2WC1-8 | Low-Profile Leaky-Wave Antenna with Monopolar Radiation Pattern Using Composite Right / Left-Handed Transmission Line
Woo-jin Kim, Naobumi Michishita, Yoshihide Yamada, |
| 2WC1-9 | Single-feed Circularly Polarized Microstrip Antenna Loaded with a Periodic Structure Superstrate
Chawalit Rakluea, Sarawuth Chaimool, Kwok L. Chung, Prayoot Akkaraekthalin, |
