講演名 2014-10-30
クラッド層境界で生じる反射波を利用した埋め込み型光導波路の屈曲損低減(超高速伝送,変復調,分散補償技術,超高速光信号処理技術,広帯域光増幅,WDM技術,受光デバイス,高光出力伝送技術,及び一般(ECOC報告))
谷田部 漠, 仁藤 雄大, 山内 潤治, 中野 久松,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 埋め込み型光導波路において,屈曲損を低減するための新たな手法を提案する.はじめに,コアを空気層近傍に設置すると,純粋屈曲損が低減できることをビーム伝搬法(BPM)により明らかにする.これは,屈曲によって生じる漏れ波の一部が,コア上部の空気層-クラッド層境界で反射し,本来の漏れ波と逆位相の関係で干渉することで,漏れ波が打ち消されることを利用している.さらに,漏れ波の抑圧された固有モード界はより強くコアに集中するため,遷移損も低減されることを示す.同様の効果は,コア下部のシリコン基板境界でも得られる.結果として,コアの埋め込み位置を調節し,コア上下部の屈折率境界で生じる反射波を利用することで,波長λ=1.3~1.65μmの広帯域に渡り,屈曲損の低減できることを明示する.
抄録(英) We develop a new technique for reducing the bend loss in a buried waveguide using the semivectorial finite-difference beam-propagation method. It is numerically shown that a core embedded near the air region allows us to reduce the pure bend loss. Since the leaky wave caused by the bend extends as it propagates towards the outer side of the bend, a portion of the wave is reflected at the upper interface between the cladding and the air region. The reflected wave coming back to the cladding interferes with the original leaky wave, so that the resultant wave is significantly reduced depending on the phase relation between the original and reflected waves. In addition, the eigenmode field whose leaky wave is suppressed is confined well in the core, so that the transition loss is reduced. A similar situation is also expected for the wave reflected from the silicon substrate. As a result, a proper choice of the core location leads to remarkable loss reduction over a wide spectral range from 1.3 to 1.65 μm.
キーワード(和) 屈曲光導波路 / 純粋屈曲損 / 遷移損 / ビーム伝搬法(BPM)
キーワード(英) Bent optical waveguide / Pure bend loss / Transition loss / Beam-propagation method (BPM)
資料番号 OCS2014-57,OPE2014-101,LQE2014-75
発行日

研究会情報
研究会 LQE
開催期間 2014/10/23(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Lasers and Quantum Electronics (LQE)
本文の言語 JPN
タイトル(和) クラッド層境界で生じる反射波を利用した埋め込み型光導波路の屈曲損低減(超高速伝送,変復調,分散補償技術,超高速光信号処理技術,広帯域光増幅,WDM技術,受光デバイス,高光出力伝送技術,及び一般(ECOC報告))
サブタイトル(和)
タイトル(英) Bend Loss Reduction of a Buried Waveguide Using Reflection Waves Generated from Cladding Interfaces
サブタイトル(和)
キーワード(1)(和/英) 屈曲光導波路 / Bent optical waveguide
キーワード(2)(和/英) 純粋屈曲損 / Pure bend loss
キーワード(3)(和/英) 遷移損 / Transition loss
キーワード(4)(和/英) ビーム伝搬法(BPM) / Beam-propagation method (BPM)
第 1 著者 氏名(和/英) 谷田部 漠 / Baku YATABE
第 1 著者 所属(和/英) 法政大学理工学部
Faculty of Science and Engineering, Hosei University
第 2 著者 氏名(和/英) 仁藤 雄大 / Yuta NITO
第 2 著者 所属(和/英) 法政大学理工学部
Faculty of Science and Engineering, Hosei University
第 3 著者 氏名(和/英) 山内 潤治 / Junji YAMAUCHI
第 3 著者 所属(和/英) 法政大学理工学部
Faculty of Science and Engineering, Hosei University
第 4 著者 氏名(和/英) 中野 久松 / Hisamatsu NAKANO
第 4 著者 所属(和/英) 法政大学理工学部
Faculty of Science and Engineering, Hosei University
発表年月日 2014-10-30
資料番号 OCS2014-57,OPE2014-101,LQE2014-75
巻番号(vol) vol.114
号番号(no) 283
ページ範囲 pp.-
ページ数 6
発行日