講演名 2014-06-20
定在波同軸管法を用いたPIM測定における非共振試料の試料長依存性に関する考察(材料デバイスサマーミーティング)
森田 久美子, 久我 宣裕,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 本稿では,測定試料の長さが定在波同軸管法を用いて得られる測定PIM値に与える影響について計算及び実験により検討を行った.まず,定在波同軸管法の等価回路を分布定数回路としてモデル化し,等価回路から求めた計算結果と実験結果の比較より,同様な傾向が得られることを確認した.これより,これまで試料長が変わるごとに求めていた等価集中定数抵抗を用いることなく,試料の長さのみで計算を行うことができるようになった.この計算モデルを用いて試料長が測定PIM値に与える影響について検討を行った.計算及び実験により得られるS_<11>特性より,送信周波数f_1,f_2と受信周波数f_での同軸管と試料間の結合量であるS_<21,all>が得られる.このS_<21,all>が測定PIM値と同様な挿入長特性の傾向を持つことを示し,測定PIM値の比較をS_<21,all>を用いて同様に行える事を確認した.S_<21,all>を用いることで,試料長が測定PIM値に与える影響について計算によって求めることが可能であることを確認した.
抄録(英) This report discusses the influence of the length of a detuned sample in PIM measurement using Standing Wave Coaxial Tube Method. Firstly, the employed coaxial tube and sample is modeled as a distributed constant circuit. It is confirmed that the calculation by the proposed model gives similar tendency with the measurement. Therefore, the proposed method is able to calculate using only the length of DUT without demanding equivalent lumped resistance. Next, it is considered that the influence of the DUT length on PIM level using the proposed calculation method. It is able to calculate the coupling strongth between the coaxial tube and the DUT using return loss. From the result, it is confirmed that the insertion length charactaristic of the coupling strongth and PIM level is seen similar tendency. It is able to simlate PIM level to calculate the coupling strongth that is demand by proposed calculate model.
キーワード(和) 定在波同軸管法 / 受動回路における相互変調ひずみ / 非線形現象 / 分布定数 / フリンジンク容量
キーワード(英) Standing Wave Coaxial Tube Method / Passive Intermodulation / nonlinear phenomenon / distributed constant / fringe capacitance
資料番号 EMD2014-15,CPM2014-35,OME2014-23
発行日

研究会情報
研究会 OME
開催期間 2014/6/13(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Organic Material Electronics (OME)
本文の言語 JPN
タイトル(和) 定在波同軸管法を用いたPIM測定における非共振試料の試料長依存性に関する考察(材料デバイスサマーミーティング)
サブタイトル(和)
タイトル(英) A consideration of a detuned sample length dependency in PIM measurement using Standing Wave Coaxial Tube Method
サブタイトル(和)
キーワード(1)(和/英) 定在波同軸管法 / Standing Wave Coaxial Tube Method
キーワード(2)(和/英) 受動回路における相互変調ひずみ / Passive Intermodulation
キーワード(3)(和/英) 非線形現象 / nonlinear phenomenon
キーワード(4)(和/英) 分布定数 / distributed constant
キーワード(5)(和/英) フリンジンク容量 / fringe capacitance
第 1 著者 氏名(和/英) 森田 久美子 / Kumiko MORITA
第 1 著者 所属(和/英) 横浜国立大学大学院工学府
Faculty of Engineering, Yokohama National University
第 2 著者 氏名(和/英) 久我 宣裕 / Nobuhiro KUGA
第 2 著者 所属(和/英) 横浜国立大学大学院工学府
Faculty of Engineering, Yokohama National University
発表年月日 2014-06-20
資料番号 EMD2014-15,CPM2014-35,OME2014-23
巻番号(vol) vol.114
号番号(no) 96
ページ範囲 pp.-
ページ数 4
発行日