講演名 | 2013-11-21 Jインバータを用いたリコンフィギャラブルバンドパスフィルタの帯域幅制御設計 加藤 匠, 小林 綾介, 山尾 泰, |
---|---|
PDFダウンロードページ | PDFダウンロードページへ |
抄録(和) | 近年,携帯端末は国際化および大容量化のために通信システムの拡充・進化への対応が求められ,割当られた広い範囲の周波数帯に対応できるよう,複数の周波数帯域に柔軟にアクセスできる無線回路が求められている.このため分岐線路を3個のRFスイッチで切替る3ビット可変共振器を2段縦属接続した,8周波数切替可能な3ビットリコンフィギャラブルバンドパスフィルタが提案されている.しかしながら,切替た中心周波数によって帯域幅に偏差が生ずる問題についての分析と,偏差を小さくするための設計法については,これまで十分に検討されていない.本稿では,共振器の結合に用いられるJインバータにインダクタあるいはキャパシタを用いた場合の外部Qと結合係数を算出することで,中心周波数切替による帯域幅の偏差を解析した.この結果,インダクタを用いた場合は外部Qと結合係数の変化が少なく,帯域偏差を抑えた設計が可能であることを明らかにした. |
抄録(英) | In recent years, mobile terminals have been required to cover wide range of RF frequencies for the enhancement of mobile communication systems that aim at globalization and high capacity. Thus reconfigurable RF circuits for the terminals attract much attention because they are expected to be able to flexibly change many frequency bands under the control of the communication systems. Two-stage reconfigurable bandpass filter (BPF) with eight-frequency (three-bit) selection capability has been proposed for this goal. It consists of two stages of branch-line switched type variable resonators. However, the passband widths show differences among eight frequencies. In this paper, bandwidth variations of the reconfigurable BPFs using J-inverter coupling method with capacitors or inductors are analyzed by calculating external Q and coupling coefficients. The results show that the inductor coupling design enables less variation of the external Q and coupling coefficient, thus can reduce bandwidth deviation of the reconfigurable BPF compared with capacitance coupling. |
キーワード(和) | バンドパスフィルタ / 伝送線路 / 周波数可変 / 外部Q / 結合係数 |
キーワード(英) | bandpass filter / transmission line / reconfigurable circuit / quality factor / coupling coefficient |
資料番号 | MW2013-136 |
発行日 |
研究会情報 | |
研究会 | MW |
---|---|
開催期間 | 2013/11/14(から1日開催) |
開催地(和) | |
開催地(英) | |
テーマ(和) | |
テーマ(英) | |
委員長氏名(和) | |
委員長氏名(英) | |
副委員長氏名(和) | |
副委員長氏名(英) | |
幹事氏名(和) | |
幹事氏名(英) | |
幹事補佐氏名(和) | |
幹事補佐氏名(英) |
講演論文情報詳細 | |
申込み研究会 | Microwaves (MW) |
---|---|
本文の言語 | JPN |
タイトル(和) | Jインバータを用いたリコンフィギャラブルバンドパスフィルタの帯域幅制御設計 |
サブタイトル(和) | |
タイトル(英) | A Bandwidth Control Design of Reconfigurable Bandpass Filter Using J-Inverter |
サブタイトル(和) | |
キーワード(1)(和/英) | バンドパスフィルタ / bandpass filter |
キーワード(2)(和/英) | 伝送線路 / transmission line |
キーワード(3)(和/英) | 周波数可変 / reconfigurable circuit |
キーワード(4)(和/英) | 外部Q / quality factor |
キーワード(5)(和/英) | 結合係数 / coupling coefficient |
第 1 著者 氏名(和/英) | 加藤 匠 / Takumi KATO |
第 1 著者 所属(和/英) | 電気通信大学先端ワイヤレスコミュニケーション研究センター Advanced Wireless Communication Research Center (AWCC), The University of Electro-Communications |
第 2 著者 氏名(和/英) | 小林 綾介 / Ryosuke KOBAYASHI |
第 2 著者 所属(和/英) | 電気通信大学先端ワイヤレスコミュニケーション研究センター Advanced Wireless Communication Research Center (AWCC), The University of Electro-Communications |
第 3 著者 氏名(和/英) | 山尾 泰 / Yasushi YAMAO |
第 3 著者 所属(和/英) | 電気通信大学先端ワイヤレスコミュニケーション研究センター Advanced Wireless Communication Research Center (AWCC), The University of Electro-Communications |
発表年月日 | 2013-11-21 |
資料番号 | MW2013-136 |
巻番号(vol) | vol.113 |
号番号(no) | 307 |
ページ範囲 | pp.- |
ページ数 | 6 |
発行日 |