講演名 2012-09-27
金属ロッド共振器を用いた60GHz帯反射型自己注入同期NRDガイドガン発振器の発振特性の計算(マイクロ波ミリ波、一般)
一瀬 健人, 田中 智大, 黒木 太司,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 共振器の加工精度や低廉性の点から、1300程度の無負荷Qを有する金属ロッド共振器を用いた60GHz帯反射型自己注入同期NRDガイドガン発振器を検討している。まず共振器の共振モードとしては、反射型自己注入同期方式を採用することから、金属ロッド伝送線路の第1高次モードに着目し、高次モード金属ロッド共振器の遮断周波数や無負荷Qを計算することにより金属ロッドの直径を決定した。次にこの高次モード金属ロッド共振器を実装した自己注入同期発振器の計算モデルにより、反射型構造において発振特性と位相雑音の計算を行い、結果からセラミック共振器を用いた場合と同程度の安定な発振器が実現できることを確かめた。
抄録(英) From the viewpoints of cost-effectiveness and fabrication accuracy, the reflection type of self-injection locked NRD guide Gunn oscillator using a metal rod resonator with an unloaded Q-factor of about 1300 has been investigated. In the first place, the first higher order mode of the metal rod transmission line was focused as the resonant mode due to applying the reflection type of self-locking scheme, and the diameter of the metal rod was decided by calculating the cutoff frequency and the unloaded Q factor. Next, the oscillation and phase-noise characteristics of the oscillator using the metal rod resonator were calculated using the analytical model. From the results, it was confirmed that the oscillation performance was almost the same as that of the reflection type of self-injection locked NRD guide Gunn oscillator using a ceramic resonator.
キーワード(和) ミリ波 / NRDガイド / ガン発振器 / 自己注入同期
キーワード(英) Millimeter-waves / NRD Guide / Gunn Diodes / and Self-injection Locking Techniques
資料番号 MW2012-65
発行日

研究会情報
研究会 MW
開催期間 2012/9/20(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Microwaves (MW)
本文の言語 JPN
タイトル(和) 金属ロッド共振器を用いた60GHz帯反射型自己注入同期NRDガイドガン発振器の発振特性の計算(マイクロ波ミリ波、一般)
サブタイトル(和)
タイトル(英) Calculation of Oscillation Characteristics of Reflection Type of Self-injection Locked NRD Guide Gunn Oscillator Loading Metal Rod Resonator at 60 GHz
サブタイトル(和)
キーワード(1)(和/英) ミリ波 / Millimeter-waves
キーワード(2)(和/英) NRDガイド / NRD Guide
キーワード(3)(和/英) ガン発振器 / Gunn Diodes
キーワード(4)(和/英) 自己注入同期 / and Self-injection Locking Techniques
第 1 著者 氏名(和/英) 一瀬 健人 / Kento ICHINOSE
第 1 著者 所属(和/英) 呉工業高等専門学校
Kure National College of Technology
第 2 著者 氏名(和/英) 田中 智大 / Tomohiro TANAKA
第 2 著者 所属(和/英) 呉工業高等専門学校
Kure National College of Technology
第 3 著者 氏名(和/英) 黒木 太司 / Futoshi KUROKI
第 3 著者 所属(和/英) 呉工業高等専門学校
Kure National College of Technology
発表年月日 2012-09-27
資料番号 MW2012-65
巻番号(vol) vol.112
号番号(no) 217
ページ範囲 pp.-
ページ数 4
発行日