講演名 2012/8/20
ループ型人工磁気導体のバンドギャップ特性(測定,電力伝送,一般)
久世 竜司, 堀 俊和, 藤元 美俊,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 完全磁気導体(PMC: Perfect Magnetic Conductor)特性を持つ人工磁気導体(AMC: Artificial Magnetic Conductor)は,ある条件の下で電磁バンドギャップ(EBG: Electromagnetic Band Gap)を持つことが知られている.本報告では, AMCの構造としてループ型AMCを取り上げ, AMCの構造とEBGとの関係を明らかにしている. FDTD法を用いた解析の結果,ループ型はパッチ型と比較して低周波でEBG特性を持ち, EBG特性を示す比帯域幅が大きくなることがわかった.また,パッチ型では配列周期に対して金属辺長が短いとEBG特性を持たないが,ループ型の場合,配列周期に対して素子長を短くしてもEBG特性を持つことがわかった.さらに,水平入射においてもループ型素子が共振することを示した.また,本報告に用いた構造の中でループ型AMCがEBG特性を得るのに適した構造であることを示した.ループ型AMCは金属幅w/lが1/8以下,金属長l/pが約0.72以上の範囲でEBG特性を示すことを明らかにした.
抄録(英) An artificial magnetic conductor (AMC), which has the perfect magnetic conductor (PMC) characteristics, is known as a meta-material that has the electromagnetic band gap (EBG) under a specific condition. This paper describes the EBG (Electromagnetic Band Gap) characteristics of loop type AMC (artificial magnetic conductor). It is clarified by the simulation results using FDTD method that the Loop type AMC has EBG characteristics in lower frequency band than patch type AMC, and the bandwidth becomes wide. It is also clarified that the loop type AMC has the EBG characteristics at lower frequency than patch type AMC. And it is shown that the loop type elements resonates even though the electromagnetic wave incidents from horizontal direction. It is also shown that the loop type AMC is appropriate to obtain the EBG characteristics. In contrast, it is clarified that the loop type AMC has EBG characteristics when the metal length l/p is greater than about 0.72 and the metal width w/l is less than 1/8.
キーワード(和) 人工磁気導体 / 電磁バンドギャップ
キーワード(英) AMC / EBG
資料番号 A・P2012-71
発行日

研究会情報
研究会 AP
開催期間 2012/8/20(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Antennas and Propagation (A・P)
本文の言語 JPN
タイトル(和) ループ型人工磁気導体のバンドギャップ特性(測定,電力伝送,一般)
サブタイトル(和)
タイトル(英) EBG Characteristics of Loop Type Artificial Magnetic Conductor
サブタイトル(和)
キーワード(1)(和/英) 人工磁気導体 / AMC
キーワード(2)(和/英) 電磁バンドギャップ / EBG
第 1 著者 氏名(和/英) 久世 竜司 / Ryuji KUSE
第 1 著者 所属(和/英) 福井大学大学院工学研究科
Graduate School of Engineering, University of Fukui
第 2 著者 氏名(和/英) 堀 俊和 / Toshikazu HORI
第 2 著者 所属(和/英) 福井大学大学院工学研究科
Graduate School of Engineering, University of Fukui
第 3 著者 氏名(和/英) 藤元 美俊 / Mitoshi FUJIMOTO
第 3 著者 所属(和/英) 福井大学大学院工学研究科
Graduate School of Engineering, University of Fukui
発表年月日 2012/8/20
資料番号 A・P2012-71
巻番号(vol) vol.112
号番号(no) 187
ページ範囲 pp.-
ページ数 4
発行日