講演名 2012-06-14
印刷画像からの情報検出におけるマーカ埋め込みによる幾何学的歪み補正法の改良(スマートパーソナルシステム,一般)
玉置 公寿, 光安 一輝, 棟安 実治, 花田 良子,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) データを埋め込んだ画像から直接データを検出する技術において,スキャナなどを使って画像を取り込む際,取り込んだ画像に回転・縮小・平行移動による幾何学的な歪みが生じる.これらは,データ検出に大きな影響を与えるために補正が必要である.これまで,これらの幾何学的歪み補正法として,周波数領域に位置合わせのためのマーカを挿入する手法が提案されている.本稿ではこれを改良し,マーカ挿入位置を再検討するとともに,マーカ検出位置をサブピクセルレベルの精度で行うことにより,より精度良く歪み補正を行う手法について提案する.また,画像の背景が印刷用紙と類似した色であっても処理対象の画像を抽出できる手法についても検討を行っている.最後に,実験により従来手法との比較を行い,その有効性を示す.
抄録(英) For extracting data from a printed image, the capturing of the image by a scanning device is required. In this case, the captured image is distorted by the geometrical distortion such as rotation, scaling and translation. These distortions affect the detection of the data. The correction of the distortions by a marker embedding method has been proposed. In this paper, we propose an improvement of the data embedding and extracting method for the printed image with embedding makers. The proposed method detects the position of the markers by sub-pixel precision to improve the accuracy and the makers are used for the correction of the rotation and the scaling. The new method of extracting the target image from the captured image also proposed. Through the experimental results, the effectiveness of the proposed method is shown.
キーワード(和) 幾何学的歪み / 印刷画像 / データ埋め込み / サブピクセル / DFT / マーカ
キーワード(英) geometrical distortion / printed image / data embedding / sub-pixel / DFT / maker
資料番号 SIS2012-10
発行日

研究会情報
研究会 SIS
開催期間 2012/6/7(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Smart Info-Media Systems (SIS)
本文の言語 JPN
タイトル(和) 印刷画像からの情報検出におけるマーカ埋め込みによる幾何学的歪み補正法の改良(スマートパーソナルシステム,一般)
サブタイトル(和)
タイトル(英) Improvement for Geometrical Error Correction Using Embedding Markers for Information Retrieval from Printed Images
サブタイトル(和)
キーワード(1)(和/英) 幾何学的歪み / geometrical distortion
キーワード(2)(和/英) 印刷画像 / printed image
キーワード(3)(和/英) データ埋め込み / data embedding
キーワード(4)(和/英) サブピクセル / sub-pixel
キーワード(5)(和/英) DFT / DFT
キーワード(6)(和/英) マーカ / maker
第 1 著者 氏名(和/英) 玉置 公寿 / Kimitoshi TAMAKI
第 1 著者 所属(和/英) 関西大学大学院理工学研究科
Graduate School of Science and Engineering, Kansai University
第 2 著者 氏名(和/英) 光安 一輝 / Kazuki MITSUYASU
第 2 著者 所属(和/英) 関西大学システム理工学部
Faculty of Engineering Science, Kansai University
第 3 著者 氏名(和/英) 棟安 実治 / Mitsuji MUNEYASU
第 3 著者 所属(和/英) 関西大学システム理工学部
Faculty of Engineering Science, Kansai University
第 4 著者 氏名(和/英) 花田 良子 / Yohiko HANADA
第 4 著者 所属(和/英) 関西大学システム理工学部
Faculty of Engineering Science, Kansai University
発表年月日 2012-06-14
資料番号 SIS2012-10
巻番号(vol) vol.112
号番号(no) 78
ページ範囲 pp.-
ページ数 6
発行日