講演名 2012-05-24
空孔付加型Aeff拡大低マイクロベンド損失のメカニズムとその最適化検討
土田 幸寛, 武笠 和則, 杉崎 隆一,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) これまで我々は、Aeffや波長分散等の光ファイバ光学特性に影響を与えない外周近傍に空孔を配置し、中心の屈折率分布により光を閉じ込めるコアを有する光ファイバを試作し、空孔が有する新規作用として、空孔が光学特性に影響を与えない、マイクロベンド損失抑制作用を有することを明らかにしてきた。しかしながら、空孔を配置することによるマイクロベンド損失の減少効果について十分な実験検討はなされていない。そこで、本報告では、マイクロベンド損失の空孔直径依存性を明らかにすると共に、空孔ではなくフッ素添加領域を配置した光ファイバを新たに試作し、空孔を配置することでマイクロベンド損失が減少するメカニズムについて実験的に検討している。この結果より、Aeffが140μm^2程度、λc=1300nm程度、曲げ半径10mmにおけるマクロベンド損失が28dB/m、マイクロベンド損失が13.6dB/kmから7.8dB/kmへと改善した光ファイバを実現している。
抄録(英) We have reported a new type of optical fibers with a core formed by matured technology, namely the VAD method, and air-holes arranged in a circular pattern around the fiber edge, which do not affect its optical properties such as Aeff, macro-bending loss, and cutoff wavelength but reduce micro-bending loss. From this result, we have indicated that the air-holes have a novel functionality of absorbing micro-deformation from the outside, leading to the significant reduction of micro-bending loss. However, we have not yet fully understood the mechanism of the micro-bending loss reduction, whether the reduction is obtained by mechanical effect of air-holes or index difference between air and silica. Moreover, we have not yet investigated the micro-bending loss dependent on the air-hole diameter. In this paper, in order to study a functionality of air-holes placed around the fiber edge, we designed and fabricated the trench-index core fiber with Aeff of 140 μm^2 having air-holes acting as micro-bending loss reducer with macro-bending loss of 28 dB/m and micro-bending loss of 7.8 dB/km, which has a low micro-bending loss relative to the micro-bending loss value of SMF with the same Aeff of 140 μm^2.
キーワード(和) 空孔付加型光ファイバ / 大Aeff型光ファイバ / マイクロベンド損失
キーワード(英) Hole-assisted Fiber / Large-mode-area Optical Fiber / Micro-bending Losses
資料番号 OFT2012-4
発行日

研究会情報
研究会 OFT
開催期間 2012/5/17(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Optical Fiber Technology (OFT)
本文の言語 JPN
タイトル(和) 空孔付加型Aeff拡大低マイクロベンド損失のメカニズムとその最適化検討
サブタイトル(和)
タイトル(英) Analyzing a New Mechanism of Air Holes to Suppress Micro-bending Loss in Large-mode-area Optical Fibers
サブタイトル(和)
キーワード(1)(和/英) 空孔付加型光ファイバ / Hole-assisted Fiber
キーワード(2)(和/英) 大Aeff型光ファイバ / Large-mode-area Optical Fiber
キーワード(3)(和/英) マイクロベンド損失 / Micro-bending Losses
第 1 著者 氏名(和/英) 土田 幸寛 / Yukihiro TSUCHIDA
第 1 著者 所属(和/英) 古河電気工業株式会社
Fitel Photonics Laboratory, Furukawa Electric co., ltd.
第 2 著者 氏名(和/英) 武笠 和則 / Kazunori MUKASA
第 2 著者 所属(和/英) 古河電気工業株式会社
Fitel Photonics Laboratory, Furukawa Electric co., ltd.
第 3 著者 氏名(和/英) 杉崎 隆一 / Ryuichi SUGIZAKI
第 3 著者 所属(和/英) 古河電気工業株式会社
Fitel Photonics Laboratory, Furukawa Electric co., ltd.
発表年月日 2012-05-24
資料番号 OFT2012-4
巻番号(vol) vol.112
号番号(no) 54
ページ範囲 pp.-
ページ数 5
発行日