講演名 | 2012-03-16 IEC60268-7準拠耳介モデルの耳道構造とカナル型イヤホンの音圧測定再現性に関する検討と考察 稲永 潔文, 伊福部 達, 木村 富至, 山村 照正, |
---|---|
PDFダウンロードページ | PDFダウンロードページへ |
抄録(和) | ヘッドホン・イヤホンの測定には,実使用状態に近くかつ測定結果の再現性の良い測定プラットフォームが求められ,その一つとしてIEC60318-7(60959)準拠のHATSにIEC60268-7準拠の耳介モデル(Pinna simulator)を搭載したHATSが推奨されている.しかし耳介モデルの耳道構造まで規定されていないため,イヤホンの種類によっては測定結果の再現性に問題のある場合があった.特にカナル(挿入)型イヤホンの場合,耳道構造が測定結果の再現性に大きな影響を及ぼすことから,実耳に近い耳道構造を模擬した耳介モデルの検討を行った.測定の結果,再現性の向上が確認された. |
抄録(英) | A measurement platform that may realize a state of real use and good reproducibility is requested for measuring characteristics of headphones and earphones. Combination of a pinna model (simulator) based on IEC60268-7 with HATS based on IEC60318-7 (60959) has been recommended as one of measurement platforms. However, there is a problem that the reproducibility of measurement results changes according to a kind of the earphone. The reason would be because the ear canal structure of the pinna model is not sufficiently provided. Especially, the ear canal structure exerts a big influence on the reproducibility of the measurement result for Canal (insertion) type earphone. Therefore, a new pinna model that may exactly simulate the ear canal structure of a real ear was proposed in this report. From the measurement results, it was ascertained that the reproducibility can be certainly improved by using the new pinna model. |
キーワード(和) | IEC / HATS / SAMAE / ヘッドホン / イヤホン / 音圧規制 / ノイズキャンセル / カナル型 / EN-50332 |
キーワード(英) | IEC / HATS / SAMAR / Headphones / Earphones / Measuring / Noise canc / Canal-type / EN50332 |
資料番号 | EA2011-121 |
発行日 |
研究会情報 | |
研究会 | EA |
---|---|
開催期間 | 2012/3/9(から1日開催) |
開催地(和) | |
開催地(英) | |
テーマ(和) | |
テーマ(英) | |
委員長氏名(和) | |
委員長氏名(英) | |
副委員長氏名(和) | |
副委員長氏名(英) | |
幹事氏名(和) | |
幹事氏名(英) | |
幹事補佐氏名(和) | |
幹事補佐氏名(英) |
講演論文情報詳細 | |
申込み研究会 | Engineering Acoustics (EA) |
---|---|
本文の言語 | JPN |
タイトル(和) | IEC60268-7準拠耳介モデルの耳道構造とカナル型イヤホンの音圧測定再現性に関する検討と考察 |
サブタイトル(和) | |
タイトル(英) | Examination and consideration concerning a relation between ear canal structure of IEC60268-7-based pinna model and reproducibility of sound pressure measurement |
サブタイトル(和) | |
キーワード(1)(和/英) | IEC / IEC |
キーワード(2)(和/英) | HATS / HATS |
キーワード(3)(和/英) | SAMAE / SAMAR |
キーワード(4)(和/英) | ヘッドホン / Headphones |
キーワード(5)(和/英) | イヤホン / Earphones |
キーワード(6)(和/英) | 音圧規制 / Measuring |
キーワード(7)(和/英) | ノイズキャンセル / Noise canc |
キーワード(8)(和/英) | カナル型 / Canal-type |
キーワード(9)(和/英) | EN-50332 / EN50332 |
第 1 著者 氏名(和/英) | 稲永 潔文 / Kiyofumi INANAGA |
第 1 著者 所属(和/英) | 東京大学高齢社会総合研究機構 Institute of Gerontology, The University of Tokyo |
第 2 著者 氏名(和/英) | 伊福部 達 / Tohru IFUKUBE |
第 2 著者 所属(和/英) | 東京大学高齢社会総合研究機構 Institute of Gerontology, The University of Tokyo |
第 3 著者 氏名(和/英) | 木村 富至 / Tominori KIMURA |
第 3 著者 所属(和/英) | 株式会社テクニカフクイ技術部技術課 Technica Fukui Co., Ltd,. ENGINEERING DEPT |
第 4 著者 氏名(和/英) | 山村 照正 / Terumasa YAMAMURA |
第 4 著者 所属(和/英) | 株式会社テクニカフクイ技術部技術課 Technica Fukui Co., Ltd,. ENGINEERING DEPT |
発表年月日 | 2012-03-16 |
資料番号 | EA2011-121 |
巻番号(vol) | vol.111 |
号番号(no) | 490 |
ページ範囲 | pp.- |
ページ数 | 6 |
発行日 |