講演名 2010-03-05
外部衝撃に対して同軸接点で発生する相互変調歪みの測定(ショートノート(卒論・修論発表会))
富菜 将基, 久我 宣裕,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 同軸コネクタ勘合部分の加振に対する相互変調ひずみ特性評価法について実験的検討を実施した.標準試験法として現在提案されている荷重の自由落下衝撃を用いる試験法とハンマーによるタッピング試験を,N型同軸コネクタを試料として比較した.荷重自由落下による衝撃を用いる場合には,推奨トルク勘合時のPIM特性を評価するために質量60g程度の導体柱を用いることが必要であり,衝撃を複数回印加することが必須であることを確認した.またタッピング試験について衝撃印加周波数の観点から考察を行った結果,1Hz等の低速加振がコネクタ勘合部特性の評価には現実的であることを確認した.
抄録(英) Two test methods for passive intermodulation at the mating surface of coaxial connector is evaluated by experiment. In this report, a result by the weight-dropping test proposed for a standard test method and the tapping test using a metallic hammer is presented. It is confirmed that sufficient weight is 60g to test an N-connector with its recommended mating force, and the impacts should be applied several times on the tested connector. In the tapping test, impacts with low frequency such as 1Hz are effective to evaluate the mating condition of a coaxial connector.
キーワード(和) 相互変調ひずみ / 非線形ひずみ / 同軸コネクタ
キーワード(英) Intermodulation / Nonlinear Distortion / Coaxial connector
資料番号 EMD2009-136
発行日

研究会情報
研究会 EMD
開催期間 2010/2/26(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Electromechanical Devices (EMD)
本文の言語 JPN
タイトル(和) 外部衝撃に対して同軸接点で発生する相互変調歪みの測定(ショートノート(卒論・修論発表会))
サブタイトル(和)
タイトル(英) Passive Intermodulation measurement of coaxial connector for outer impact force
サブタイトル(和)
キーワード(1)(和/英) 相互変調ひずみ / Intermodulation
キーワード(2)(和/英) 非線形ひずみ / Nonlinear Distortion
キーワード(3)(和/英) 同軸コネクタ / Coaxial connector
第 1 著者 氏名(和/英) 富菜 将基 / Masaki TOMINA
第 1 著者 所属(和/英) 横浜国立大学大学院工学府
Faculty of Engineering, Yokohama National University
第 2 著者 氏名(和/英) 久我 宣裕 / Nobuhiro KUGA
第 2 著者 所属(和/英) 横浜国立大学大学院工学府
Faculty of Engineering, Yokohama National University
発表年月日 2010-03-05
資料番号 EMD2009-136
巻番号(vol) vol.109
号番号(no) 452
ページ範囲 pp.-
ページ数 4
発行日