講演名 2009-12-18
2つの周波数を用いた面内複合振動体(強力超音波)
渡辺 裕二, 米谷 和幸, 成瀬 健悟,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 本研究では、薄いフィルムなどの超音波溶着に用いる振動工具として、1つの共振体を2つの共振周波数で駆動する複合モード振動体について検討した。共振体は角棒状であり、振動工具面は角棒の側面とする。この共振体について、1波長縦振動共振と1.5波長縦振動共振を同時に用いる。1.5波長共振時の縦振動節位置(2箇所)にスリットを設け、縦振動応力によるスリット部の変形により、スリット部の間にたわみ振動を励起する。共振体の中央部は、1波長共振時の縦振動と、1.5波長共振時のたわみ振動が重ね合わされるので、複合モードの面内振動が発生する。ここでは、本共振体の設計方法、駆動方法および振動状況の測定結果について述べる。
抄録(英) We studied on a new type of ultrasonic welding tool for joining thin films. The tool is a resonator which is driven by two resonant frequencies at the same time, and the lateral face of the resonator is used as a face of joining tool. The resonator vibrates in one wavelength and 1.5 wavelength resonance. On the nodal points of 1.5 wavelength resonance, four sets of slits are made. The stress of the nodal points makes shear force, so that the force makes flexural-mode vibration. As the result, longitudinal vibration and flexural vibration are driven by different frequency on the tool face. In this paper, we describe on the design procedure and the results of measurements of electrical characteristics and distributions of vibration amplitude.
キーワード(和) 超音波溶着 / 超音波接合 / 複合モード / 面内振動
キーワード(英) Ultrasonic welding / Ultrasonic joining / Complex-mode vibration / In-plane-mode vibration
資料番号 US2009-85
発行日

研究会情報
研究会 US
開催期間 2009/12/11(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Ultrasonics (US)
本文の言語 JPN
タイトル(和) 2つの周波数を用いた面内複合振動体(強力超音波)
サブタイトル(和)
タイトル(英) Examination of an in-plane complex-mode vibration system using two natural frequencies
サブタイトル(和)
キーワード(1)(和/英) 超音波溶着 / Ultrasonic welding
キーワード(2)(和/英) 超音波接合 / Ultrasonic joining
キーワード(3)(和/英) 複合モード / Complex-mode vibration
キーワード(4)(和/英) 面内振動 / In-plane-mode vibration
第 1 著者 氏名(和/英) 渡辺 裕二 / Yuji WATANABE
第 1 著者 所属(和/英) 拓殖大学工学部
Faculty of Engineering, Takushoku University
第 2 著者 氏名(和/英) 米谷 和幸 / Kazuyuki YONEYA
第 2 著者 所属(和/英) 精電舎電子工業
Seidensha Electronics Co., Ltd
第 3 著者 氏名(和/英) 成瀬 健悟 / Kengo NARUSE
第 3 著者 所属(和/英) 精電舎電子工業
Seidensha Electronics Co., Ltd
発表年月日 2009-12-18
資料番号 US2009-85
巻番号(vol) vol.109
号番号(no) 347
ページ範囲 pp.-
ページ数 4
発行日