講演名 2009-10-23
2周波ウィルキンソン分配器を用いた反射波吸収型帯域阻止フィルタ : 回路合成理論に基づくウィルキンソン分配器設計ツールの開発事例(MSTセッション)
内田 浩光, 山中 宏治, 山内 和久, 井上 晃, 平野 嘉仁, 宮崎 守泰,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 効率改善を目的として高調波処理が施された高出力増幅器においてその高調波輻射を抑圧するためにフィルタを導入する場合,同フィルタには通過域にて極力低損失となるとともに,高調波処理を阻害しないためにその阻止域にて低反射な特性を呈することが求められるが,通常のフィルタは抵抗素子を含まないリアクティヴ回路により構成されるため阻止域にてほぼ全反射となってしまう問題があった.そこで本稿では上述した要求を満足するフィルタとして,基本波とその2倍波にて動作する2周波ウィルキンソン分配器とリアクティヴな帯域阻止フィルタからなる反射波吸収型フィルタを提案し,その動作原理およびX帯における試作結果について述べる.また2周波ウィルキンソン分配器の設計は,均一長の分布定数線路の従続接続により構成される2周波インピーダンス変成回路の合成問題に帰着されることから,本稿では回路合成理論に基づき開発した同変成回路の設計ツールについても簡単に紹介する.
抄録(英) Harmonic-termination technique is often introduced to RF high-power amplifiers in order to boost its efficiency. At the same time, a harmonic-rejection filter is also employed to suppress the harmonic emission from the amplifier. In this case, a low-reflection property in stop-band is required to the filter, in addition to a low-loss property in pass-band, so as not to interrupt the harmonic termination in the amplifier. However, most of the microwave filters consist of reactive elements, and it is impossible to realize the low-reflection property in its stop-band. To address the problem, a reflection-absorptive band-rejection filter (BRF) is proposed in this paper, which consists of a dual-band Wilkinson power divider and a pair of conventional reactive BRF. Furthermore, a circuit-synthesis tool of a dual-band impedance-matching network consisting of commensurate transmission lines is also presented, since the design of the dual-band Wilkinson power divider attributes directly to the synthesis.
キーワード(和) 増幅器 / 高調波処理 / 反射波吸収型フィルタ / 回路合成
キーワード(英) Amplifier / harmonic termination / reflection-absorptive filter / circuit synthesis
資料番号 EMCJ2009-70,MW2009-119
発行日

研究会情報
研究会 MW
開催期間 2009/10/15(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Microwaves (MW)
本文の言語 JPN
タイトル(和) 2周波ウィルキンソン分配器を用いた反射波吸収型帯域阻止フィルタ : 回路合成理論に基づくウィルキンソン分配器設計ツールの開発事例(MSTセッション)
サブタイトル(和)
タイトル(英) A Reflection-Absorptive Band-Rejection Filter with a Dual-Band Wilkinson Power Divider : An Introduction of a Synthesis Tool for Wilkinson Power Divider
サブタイトル(和)
キーワード(1)(和/英) 増幅器 / Amplifier
キーワード(2)(和/英) 高調波処理 / harmonic termination
キーワード(3)(和/英) 反射波吸収型フィルタ / reflection-absorptive filter
キーワード(4)(和/英) 回路合成 / circuit synthesis
第 1 著者 氏名(和/英) 内田 浩光 / H. UCHIDA
第 1 著者 所属(和/英) 三菱電機株式会社情報技術総合研究所
Mitsubishi Electric Corporation, Information Technology R & D Center
第 2 著者 氏名(和/英) 山中 宏治 / K. YAMANAKA
第 2 著者 所属(和/英) 三菱電機株式会社情報技術総合研究所
Mitsubishi Electric Corporation, Information Technology R & D Center
第 3 著者 氏名(和/英) 山内 和久 / K. YAMAUCHI
第 3 著者 所属(和/英) 三菱電機株式会社情報技術総合研究所
Mitsubishi Electric Corporation, Information Technology R & D Center
第 4 著者 氏名(和/英) 井上 晃 / A. INOUE
第 4 著者 所属(和/英) 三菱電機株式会社情報技術総合研究所
Mitsubishi Electric Corporation, Information Technology R & D Center
第 5 著者 氏名(和/英) 平野 嘉仁 / Y. HIRANO
第 5 著者 所属(和/英) 三菱電機株式会社情報技術総合研究所
Mitsubishi Electric Corporation, Information Technology R & D Center
第 6 著者 氏名(和/英) 宮崎 守泰 / M. MIYAZAKI
第 6 著者 所属(和/英) 三菱電機株式会社情報技術総合研究所
Mitsubishi Electric Corporation, Information Technology R & D Center
発表年月日 2009-10-23
資料番号 EMCJ2009-70,MW2009-119
巻番号(vol) vol.109
号番号(no) 242
ページ範囲 pp.-
ページ数 6
発行日