講演名 2007-03-09
電力伝達用小型スリップリングの高信頼性化に関する研究(卒論・修論特集)
小林 辰也, 澤 孝一郎, 大島 智, 遠藤 薫, 王 軍, 萩野 弘司,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 本研究では電気摺動接点の一つとして,チップマウンターなどに用いられているAuメッキスリッピンングとAg-Pdブラシを用い,その摺動特性と劣化過程を明らかにすることを目的として測定を行っている.これまでに条件を変えて3回の実験を行ってきた.この3回の実験で寿命にいたるまでの大筋の過程は段々と明らかになってきた.また,潤滑油の重要性と6000時間を超える長寿命を達成することができた.しかし,寿命に大きな影響を与えると思われる表面皮膜の生成過程などいまだ不明瞭な点も多い.今回の実験では潤滑油と温度に焦点を当て,これらと寿命との関連性を調べた.
抄録(英) Authors have been investigation the sliding quality and the deteriration process of an electric sliding system of the Au plated slip-ring and Ag-Pd brush, which is used mainly in the chip-mounter. From previous tests, the lifetime is dependent on load current others. However, the deterioration process is almost same independent on long or short lifetime. When the Au and Ni plated layers are worn out, the base material of the ring, bronze is exposed and the surface starts to be oxidized. in this stage the contact resistance rapidly increase and the litetime is over. The lifetime is decided mainly by the surface wear rate. And then an additional experimental results are presented, which are performed to clarify factors affecting the sliding lifetime. We got interesting results of about 6000 hours life corresponding to 144,000,000 rotations, which is the longest lifetime in our tests. In this report, we research an effect of lubricant and temprature on surface to lifetime.
キーワード(和) 摺動接触 / スリップリング / ブラシ / 寿命
キーワード(英) sliding contact / slip-ring / brush / life time
資料番号 EMD2006-78
発行日

研究会情報
研究会 EMD
開催期間 2007/3/2(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Electromechanical Devices (EMD)
本文の言語 JPN
タイトル(和) 電力伝達用小型スリップリングの高信頼性化に関する研究(卒論・修論特集)
サブタイトル(和)
タイトル(英) A study on high-reliability small-size slip-ring system for power transmission
サブタイトル(和)
キーワード(1)(和/英) 摺動接触 / sliding contact
キーワード(2)(和/英) スリップリング / slip-ring
キーワード(3)(和/英) ブラシ / brush
キーワード(4)(和/英) 寿命 / life time
第 1 著者 氏名(和/英) 小林 辰也 / Tatsuya KOBAYASHI
第 1 著者 所属(和/英) 慶應義塾大学理工学部
Faculty of Science and Technology, Keio University
第 2 著者 氏名(和/英) 澤 孝一郎 / Koichiro SAWA
第 2 著者 所属(和/英) 慶應義塾大学理工学部
Faculty of Science and Technology, Keio University
第 3 著者 氏名(和/英) 大島 智 / Satoshi OSHIMA
第 3 著者 所属(和/英) 慶應義塾大学理工学部
Faculty of Science and Technology, Keio University
第 4 著者 氏名(和/英) 遠藤 薫 / Kaoru ENDO
第 4 著者 所属(和/英) 日本サーボ株式会社
Japan Servo Co.,Ltd.
第 5 著者 氏名(和/英) 王 軍 / Gun OU
第 5 著者 所属(和/英) 日本サーボ株式会社
Japan Servo Co.,Ltd.
第 6 著者 氏名(和/英) 萩野 弘司 / Hiroshi HAGINO
第 6 著者 所属(和/英) 日本サーボ株式会社
Japan Servo Co.,Ltd.
発表年月日 2007-03-09
資料番号 EMD2006-78
巻番号(vol) vol.106
号番号(no) 580
ページ範囲 pp.-
ページ数 4
発行日