講演名 2004/11/12
骨導音声を用いた話者識別と裏声判別(顔・ジェスチャ認識のためのパターン認識メディア理解,一般)
森 幹男, 槇本 由希, 荻原 慎洋, 谷口 秀次, 高橋 謙三,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 骨導音声を電気信号に変換する骨伝導マイクロホンはハンズフリーで,ヘッドセット型マイクロホンと比較して周囲騒音の影響も受けにくい.このため,ウェアラブルコンピュータの入力装置としての利用が期待できる.本研究では,日本語5母音発声時の気導音声と骨導音声の対数パワースペクトルの差を特徴量として用いて話者識別実験を行い,雑音耐性を含めた詳細な検討を行った.その結果,気導音声のみを用いた場合と比べ雑音耐性が高いことが明らかとなった.また,骨導音声の歪み率を特徴量として用い,歌声に対して裏声判別を行った結果,表声-裏声換声点の検出が可能であり,この歪み率を話者識別の特徴量として用いることによって話者識別率の向上が期待できることが明らかとなった.
抄録(英) A bone-conductive microphone which transforms bone-transmitted speech sounds through skull into electronic signals has two advantages. One is to operate in hands free mode, and another is to be anti-noise. Therefore, it is expected to match the man-machine interface for wearable computers. Here, we examined and analyzed the possibility of a speaker identification system with the logarithmic power spectrum of air and bone-transmitted speech sounds to 5 Japanese vowels. This paper shows that the bone transmitted speech sounds based system gives better performance. Further, it refers to the possibility of finding the threshold tone between falsetto and modal (non-falsetto) singing voices.
キーワード(和) 骨導音声 / 話者識別 / 裏声 / 歪み率 / 雑音耐性
キーワード(英) Bone-Transmitted Speech Sounds / Speaker Identification / Falsetto / Distortion Ratio / Noise Robustness
資料番号 PRMU2004-117,HIP2004-57
発行日

研究会情報
研究会 PRMU
開催期間 2004/11/12(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Pattern Recognition and Media Understanding (PRMU)
本文の言語 JPN
タイトル(和) 骨導音声を用いた話者識別と裏声判別(顔・ジェスチャ認識のためのパターン認識メディア理解,一般)
サブタイトル(和)
タイトル(英) Speaker Identification and Distinction between Modal Voice and Falsetto Using Bone-Transmitted Speech Sounds
サブタイトル(和)
キーワード(1)(和/英) 骨導音声 / Bone-Transmitted Speech Sounds
キーワード(2)(和/英) 話者識別 / Speaker Identification
キーワード(3)(和/英) 裏声 / Falsetto
キーワード(4)(和/英) 歪み率 / Distortion Ratio
キーワード(5)(和/英) 雑音耐性 / Noise Robustness
第 1 著者 氏名(和/英) 森 幹男 / Mikio MORI
第 1 著者 所属(和/英) 福井大学工学部
Faculty of Engineering, University of Fukui
第 2 著者 氏名(和/英) 槇本 由希 / Yuki MAKIMOTO
第 2 著者 所属(和/英) 福井大学大学院工学研究科
Graduate School of Engineering, University of Fukui
第 3 著者 氏名(和/英) 荻原 慎洋 / Mitsuhiro OGIHARA
第 3 著者 所属(和/英) 福井大学大学院工学研究科
Graduate School of Engineering, University of Fukui
第 4 著者 氏名(和/英) 谷口 秀次 / Shuji TANIGUCHI
第 4 著者 所属(和/英) 福井大学工学部
Faculty of Engineering, University of Fukui
第 5 著者 氏名(和/英) 高橋 謙三 / Kenzo TAKAHASHI
第 5 著者 所属(和/英) 福井大学工学部
Faculty of Engineering, University of Fukui
発表年月日 2004/11/12
資料番号 PRMU2004-117,HIP2004-57
巻番号(vol) vol.104
号番号(no) 448
ページ範囲 pp.-
ページ数 5
発行日