講演名 1997/12/16
各種の上下駆動式超音波プラスチック溶接の振動応力の伝達状態および溶接特性について
辻野 次郎丸, 内田 貴子, 大草 邦文, 足立 達也, 上岡 哲宜,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 超音波プラスチック溶接は熱可塑性の高分子材料等の短時間での接合が可能で、広い分野で使用されており接含性能の向上が期待されている。接合方式としては、溶接試料の上下から振動を印加する上下駆動式溶接。および高周波数の使用が有効である。高周波数90kHzでは、低周波数27kHzを用いた場合の約1/3の溶接チップ振動速度で溶接が可能であるが、高周波数では振動変位が小になるため大型試料の接合が困難となる。この欠点を克服するため、溶接チップ振動形跡が直線状の(1)高周波・小振動振幅の90kHzおよび低周波数・大振動振幅の27kHz縦振動系(接合面に垂直な平行振動)、(2)90kHzの縦振動系および20kHzのねじり振動系(直交振動)を組み合わせた上下駆動式超音波溶接装置、および振動軌跡が楕円状の(3)2組の27kHz複合振動系を組み合わせた上下駆動式超音波溶接装置を構成して、振動応カの伝搬状態、溶接特性について比較検討した。溶接試料には塩化ビニールシートおよびポリプロピレンシートを重ね合わせて用いた。振動応力の伝達状態を調べるために静圧力測定用の感圧フィルム(プレスケール)を用いた。(1)、(2)の振動系を同時駆動した場合には振動応力が有効に伝達され、一方駆動の従来の方法より、より短時間、少振動振幅で接合可能で、接合性能が顕著に向上する。また2次元の振動応力を印加する複合振動超音波溶接装置が有効であることが明らかになった。
抄録(英) High frequency 90 kHz ultrasonic plastic welding system can weld thermoplastic sheets under one-third velocity amplitude compared with that of 27 kHz systems but can not weld large specimens successfully because of relaxation effect of vibration stress due to small vibration amplitude at high frequency. To improve the welding characteristics, two-vibration-system welding equipments using (1) a high frequency 90 kHz longitudinal vibration system with small displacement amplitude and a low frequency 27 kHz longitudinal vibration system with large displacement amplitude (parallel direction), (2) a 90 kHz longitudinal and a 20 kHz torsional vibration system (normal direction), and (3) two 27 kHz complex vibration systems (vibration loci are elliptical) are studied. Welding specimens used are soft (polyvinyl chloride: shear vibration loss is large) and hard (polypropylene) sheet materials. Transmission conditions of vibration stresses are measured by pressure sensitive films (Prescale). Both specimens were welded successfully with smaller velocity amplitude than conventional welding method, similarly in both cases where (1) parallel and (2) normal direction vibration systems are driven simultaneously. The 27 kHz complex vibration systems were revealed also effective for plastic welding.
キーワード(和) 高周波数の超音波プラスチック溶接 / 上下駆動式超音波プラスチック溶接 / 異なる周波数の上下駆動式超音波溶接 / 直交振動を用いた上下駆動式超音波溶接 / 複合振動上下駆動式超音波溶接 / 振動応力の伝搬
キーワード(英) high-freguency ultrasonic plastic welding / ultrasonic welding using two vibration systems / two-vibration-system ultrasonic welding using different frequencies / two-vibration-system ultrasonic welding using crossed vibration directions / two-vibration-system ultrasonic welding using complex vibrations / transmission of vibration stress
資料番号 US97-82
発行日

研究会情報
研究会 US
開催期間 1997/12/16(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Ultrasonics (US)
本文の言語 JPN
タイトル(和) 各種の上下駆動式超音波プラスチック溶接の振動応力の伝達状態および溶接特性について
サブタイトル(和)
タイトル(英) Transmission conditions of vibration stresses and Welding Characteristics of Various Two-Vibration-System Ultrasonic Plastic Welding Systems
サブタイトル(和)
キーワード(1)(和/英) 高周波数の超音波プラスチック溶接 / high-freguency ultrasonic plastic welding
キーワード(2)(和/英) 上下駆動式超音波プラスチック溶接 / ultrasonic welding using two vibration systems
キーワード(3)(和/英) 異なる周波数の上下駆動式超音波溶接 / two-vibration-system ultrasonic welding using different frequencies
キーワード(4)(和/英) 直交振動を用いた上下駆動式超音波溶接 / two-vibration-system ultrasonic welding using crossed vibration directions
キーワード(5)(和/英) 複合振動上下駆動式超音波溶接 / two-vibration-system ultrasonic welding using complex vibrations
キーワード(6)(和/英) 振動応力の伝搬 / transmission of vibration stress
第 1 著者 氏名(和/英) 辻野 次郎丸 / Jiromaru TSUJINO
第 1 著者 所属(和/英) 神奈川大学 工学部電気工学科
Fakulty of Engineering, Kanagawa Univercity
第 2 著者 氏名(和/英) 内田 貴子 / Takako UCHIDA
第 2 著者 所属(和/英) 神奈川大学 工学部電気工学科
Fakulty of Engineering, Kanagawa Univercity
第 3 著者 氏名(和/英) 大草 邦文 / Kunifumi OHKUSA
第 3 著者 所属(和/英) 神奈川大学 工学部電気工学科
Fakulty of Engineering, Kanagawa Univercity
第 4 著者 氏名(和/英) 足立 達也 / Tatsuya ADACHI
第 4 著者 所属(和/英) 神奈川大学 工学部電気工学科
Fakulty of Engineering, Kanagawa Univercity
第 5 著者 氏名(和/英) 上岡 哲宜 / Tetsugi UEOKA
第 5 著者 所属(和/英) 神奈川大学 工学部電気工学科
Fakulty of Engineering, Kanagawa Univercity
発表年月日 1997/12/16
資料番号 US97-82
巻番号(vol) vol.97
号番号(no) 452
ページ範囲 pp.-
ページ数 8
発行日