講演名 | 2001/9/28 光ファイバ母材内部屈折率測定技術 加藤 富士夫, 佐々木 一正, 岡崎 慎吾, |
---|---|
PDFダウンロードページ | PDFダウンロードページへ |
抄録(和) | 光ファイバ母材内部屈折率測定は, その特性を評価する上で重要な評価技術である.母材内部の屈折率構造により光線が偏向するため, 母材を透かして画像を撮像したとき, 画像が歪むことを利用し, 画像情報処理技術を用いて画像歪みを解析し, 歪み量から幾何学的に光線の偏向角を求め, 数値計算により内部屈折率分布を算出する.これまで筆者らが検討してきた方式は, 斜め直線エッジ画像を静止画として用いていたが, 軸方向に依存性のある母材において適応が困難という問題が生じていた.この問題に対処するため, 背景画像を動的に制御し, 軸に垂直な断面において測定を行う走査ナイフエッジ法を新たに提案する.原理を基に測定装置を試作し, 測定を行い, 被測定母材から線引きした光ファイバの測定結果と比較し, 本方式の有効性を実証した.また, 軸依存性母材測定の有効性を確認するため, 軸依存性の強い部分での測定を試みた.いずれも期待通りの良好な結果が得られ, 走査ナイフエッジ法における軸依存性母材の内部屈折率分布測定における有効性が確認された. |
抄録(英) | The measurement of refractive index profile in optical fiber preforms is important in fiber industry to evaluate characteristics of optical fibers. This report presents a new method uses image distortion analysis for determining the ray deflection, which the index profiles can be numerically converted from. A reference pattern is located behind of the sample preform and distortion in its image taken through the preform may be observed if a distribution of refractive index exists in it. In previous report, a static angled knife-edge as reference pattern was used and then sample is restricted within axial-dependence free profiles. For applying the technique to wide range of types of preform, we introduce straight, scanning knife-edge. In order to confirm the method, we construct a test system and perform trial measurements using a tip taken near the end of the preform. The results show a good agreement to result obtained from strait part of the same preform without effect of the axially depending structure. |
キーワード(和) | 光ファイバ母材 / 屈折率分布測定 / プリフォーム / 走査ナイフエッジ法 / 軸依存性母材 |
キーワード(英) | Optical fiber preform / Index profile measurement / Scanning knife-edge method |
資料番号 | OFT2001-38 |
発行日 |
研究会情報 | |
研究会 | OFT |
---|---|
開催期間 | 2001/9/28(から1日開催) |
開催地(和) | |
開催地(英) | |
テーマ(和) | |
テーマ(英) | |
委員長氏名(和) | |
委員長氏名(英) | |
副委員長氏名(和) | |
副委員長氏名(英) | |
幹事氏名(和) | |
幹事氏名(英) | |
幹事補佐氏名(和) | |
幹事補佐氏名(英) |
講演論文情報詳細 | |
申込み研究会 | Optical Fiber Technology (OFT) |
---|---|
本文の言語 | JPN |
タイトル(和) | 光ファイバ母材内部屈折率測定技術 |
サブタイトル(和) | |
タイトル(英) | Development of Refractive-Index-Profile Measurement Technique For Optical Fiber Preforms |
サブタイトル(和) | |
キーワード(1)(和/英) | 光ファイバ母材 / Optical fiber preform |
キーワード(2)(和/英) | 屈折率分布測定 / Index profile measurement |
キーワード(3)(和/英) | プリフォーム / Scanning knife-edge method |
キーワード(4)(和/英) | 走査ナイフエッジ法 |
キーワード(5)(和/英) | 軸依存性母材 |
第 1 著者 氏名(和/英) | 加藤 富士夫 / Fujio Katou |
第 1 著者 所属(和/英) | 北海道工業大学 Hokkaido Institute of Technology |
第 2 著者 氏名(和/英) | 佐々木 一正 / Issei Sasaki |
第 2 著者 所属(和/英) | 北海道工業大学:(株)アドヴァンストテクノロジ光ファイバ応用技術研 Hokkaido Institute of Technology:Advanced Technology Inc. |
第 3 著者 氏名(和/英) | 岡崎 慎吾 / Shingo Okazaki |
第 3 著者 所属(和/英) | セイコーEG&G SEIKO EG&G |
発表年月日 | 2001/9/28 |
資料番号 | OFT2001-38 |
巻番号(vol) | vol.101 |
号番号(no) | 330 |
ページ範囲 | pp.- |
ページ数 | 6 |
発行日 |