講演名 2003/12/4
矩形導体端に設置された広帯域板状モノポールアンテナの特性
日下 洋, 久我 宣裕,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 地板端部に設置された広帯域板状モノポールアンテナを提案し,その特性を,汎用電磁界シミュレータ,CST社MW-Studio Ver.4.0を用いた数値解析により評価した.素子寸法を6×14×1.6[mm]とした時の特性について検討した結果,本アンテナは,逆相モードによる反共振以外の周波数帯で,広帯域に渡って定インピーダンス特性を有することを明らかにした.次に,本アンテナを同相モードのみで動作するよう素子形状を変化させると,2~10GHzと広帯域な特性が得られることを明らかにした.また,本アンテナは逆相モードの時でも,中心周波数3GHzにおいて50,100Ω給電系で,比帯域40%以上の広帯域な特性となることを確認した.また,入力インピーダンスの地板寸法に対する依存性は基本的に小さいが,地板幅が20[mm]以下等狭くなると,特に下限周波数付近で帯域の劣化が無視できなくなることを確認した.
抄録(英) This paper presents a wideband plate-monopole antenna appropriate for the edge-mount on the ground-plane. Characteristics of the antenna with the size of 6^*14^*1.6[mm^3] are mainly analyzed by using the EM simulator "MW-Studio.Ver.4.0". The simulated results show that the antenna has flat impedance characteristics over wide frequency band excluding the odd mode resonance of the element. When the antenna is operated only in the even mode, the wide impedance bandwidth covering from 2GHz to 10GHz is obtained. Even when the antenna is operated with odd mode, wide fractional bandwidth over 40% around 3GHz is obtained for the feeding impedance Z_0=50, 100[Ω]. The input impedance is not critical for ground-plane size, however, degradation at the lower frequencies are not negligible for the narrow ground-plane of which width is around 20[mm].
キーワード(和) 平面アンテナ / モノポールアンテナ / 広帯域アンテナ / 小型アンテナ / 有限積分法
キーワード(英) planar antenna / monopole antenna / wideband antenna / small antenna / finite integration method
資料番号 A・P2003-234
発行日

研究会情報
研究会 AP
開催期間 2003/12/4(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Antennas and Propagation (A・P)
本文の言語 JPN
タイトル(和) 矩形導体端に設置された広帯域板状モノポールアンテナの特性
サブタイトル(和)
タイトル(英) Characteristics of Wideband Plate-Monopole Antenna at a Ground Plane Edge
サブタイトル(和)
キーワード(1)(和/英) 平面アンテナ / planar antenna
キーワード(2)(和/英) モノポールアンテナ / monopole antenna
キーワード(3)(和/英) 広帯域アンテナ / wideband antenna
キーワード(4)(和/英) 小型アンテナ / small antenna
キーワード(5)(和/英) 有限積分法 / finite integration method
第 1 著者 氏名(和/英) 日下 洋 / Hiroshi KUSAKA
第 1 著者 所属(和/英) 東京工芸大学大学院
Graduate school of Engineering, Tokyo Polytechnic University
第 2 著者 氏名(和/英) 久我 宣裕 / Nobuhiro KUGA
第 2 著者 所属(和/英) 東京工芸大学大学院
Graduate school of Engineering, Tokyo Polytechnic University
発表年月日 2003/12/4
資料番号 A・P2003-234
巻番号(vol) vol.103
号番号(no) 491
ページ範囲 pp.-
ページ数 6
発行日