講演名 2003/11/12
超精密機械加工共振器を用いた有機薄膜レーザ(機能性有機薄膜,一般)
森本 雄策, 市川 結, 小山 俊樹, 谷口 彬雄, 花岡 正志, 藤田 雄二,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) ナノ領域の超精密機械加工技術及びナノインプリント法を用いて有機薄膜レーザ用の共振器を作製した.NiPを周期540nmの回折格子に切削加工し金型とした.その金型を用いてポリビニルアルコールにインプリントを行い,分布帰還型(DFB)共振器を作製した.PVA膜の上にスピンコート法にて有機活性層を成膜し,有機薄膜DFBレーザ素子を作製した.窒素ガスレーザで光励起をしたところ. 628nm付近にピークを持つ鋭い発光スペクトルが得られた.しきい値以上の励起パワーで発光ピークが狭くなることや,発光ピークの位置が共振器の周期によって裏付けられたことから,この発光スペクトルがレーザ発振によるものであることを確認した.従って,超精密機械加工技術とナノインプリント法を用いてDFBレーザ用共振器を作製できることが実証された.
抄録(英) Resonators for organic thin film lasers were fabricated by using super-precision machinery processing for nano-sized moldings and the nano-imprint method. A nano-imprinting mold with a line-and-space period of 540 nm was formed by grinding a NiP molding material. Distributed Feedback shaped resonators were made of poly (vinyl alcohol)(PVA) by nano-imprinting with the NiP mold. An organic active layer was spin-coated on the DFB resonator made of PVA. When the organic thin film DFB lasers were photo-pumped by a N_2 gas laser, a sharp emission peak was observed at a wavelength of 628 nm. The emission peak became narrow above the threshold pump power. The emission peak position was supported with the resonator period. From them, the sharp emission peak was confirmed with laser oscillation. Therefore, it was demonstrated that resonators of DFB lasers could be fabricated by using super-precision machinery processing technology and the nano-imprint method.
キーワード(和) 超精密機械加工 / ナノインプリント / DFB / 有機薄膜 / レーザ
キーワード(英) super-precision machinery processing / nano-impringing / DFB / organic thin film / laser
資料番号 OME2003-106
発行日

研究会情報
研究会 OME
開催期間 2003/11/12(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Organic Material Electronics (OME)
本文の言語 JPN
タイトル(和) 超精密機械加工共振器を用いた有機薄膜レーザ(機能性有機薄膜,一般)
サブタイトル(和)
タイトル(英) Organic Thin Film Laser Using super-precision Machinery processing resonator
サブタイトル(和)
キーワード(1)(和/英) 超精密機械加工 / super-precision machinery processing
キーワード(2)(和/英) ナノインプリント / nano-impringing
キーワード(3)(和/英) DFB / DFB
キーワード(4)(和/英) 有機薄膜 / organic thin film
キーワード(5)(和/英) レーザ / laser
第 1 著者 氏名(和/英) 森本 雄策 / Y Morimoto
第 1 著者 所属(和/英) 信州大学繊維学部機能高分子学科
Department of Functional Polymer Science, Faculty of Textile Science and Technology, Shinshu University
第 2 著者 氏名(和/英) 市川 結 / Musubu Ichikawa
第 2 著者 所属(和/英) 信州大学繊維学部機能高分子学科
Department of Functional Polymer Science, Faculty of Textile Science and Technology, Shinshu University
第 3 著者 氏名(和/英) 小山 俊樹 / Toshiki Koyama
第 3 著者 所属(和/英) 信州大学繊維学部機能高分子学科
Department of Functional Polymer Science, Faculty of Textile Science and Technology, Shinshu University
第 4 著者 氏名(和/英) 谷口 彬雄 / Yoshio Taniguchi
第 4 著者 所属(和/英) 信州大学繊維学部機能高分子学科
Department of Functional Polymer Science, Faculty of Textile Science and Technology, Shinshu University
第 5 著者 氏名(和/英) 花岡 正志 / M Hanaoka
第 5 著者 所属(和/英) 株式会社三協精機製作所開発技術部
R&D Division, Sankyo-seiki corporation
第 6 著者 氏名(和/英) 藤田 雄二 / Y Fujita
第 6 著者 所属(和/英) 株式会社三協精機製作所開発技術部
R&D Division, Sankyo-seiki corporation
発表年月日 2003/11/12
資料番号 OME2003-106
巻番号(vol) vol.103
号番号(no) 441
ページ範囲 pp.-
ページ数 5
発行日