講演名 | 2003/11/28 LECCSモデルの多電源ピンLSIへの拡張 豊田 友博, 南澤 裕一郎, 中村 克己, 和田 修己, 豊田 啓孝, 古賀 隆治, |
---|---|
PDFダウンロードページ | PDFダウンロードページへ |
抄録(和) | プリント基板からのEMI要因の1つに,IC/LSIの電源端子を流れる電源系高周波電流がある.我々は,この電流を精度良くシミュレーションするために,IC/LSIを線形等価目路と内部電流源で表現したLECCSモデルを提案してきた.今風LECCSモデルを多種電源,多電源ピンを持つLSIへ拡張した.まず,7対の電源-グランド端子間ごとに線形等価回路を置く7電源モデルを作成した.次に,7電源のうち同種の電源を束ね,Core,I/O,Analogの3種類のモデルを置く3電源モデルを作成した.7電源および3電源モデルについてインピーダンスシミュレーションをおこない,両者を比較した. |
抄録(英) | High frequency current flowing from power terminal of an IC/LSI onto power/ground planes of a printed circuit board is one of the major sources resulting to the radiated EMI. To achieve accurate simulation of this power current, a model representing the IC/LSI as a linear equivalent circuit together with an internal current source (LECCS model) was proposed in our previous studies. In this report, an extension of the LECCS model to a LSI with multiple power/ground pins is presented. 7 LECCS models were at first derived for 7 power/ground pairs, and were then reduced to 3 LECCS models to represent for the core, I/O, and analog circuits. Impedance simulations were carried but, based on the 7 and 3 LECCS models, respectively, and the results were compared. |
キーワード(和) | 電源系高周波電流 / 電源端子電流モデル / LECCS / 多電源ピンLSI |
キーワード(英) | RF power current / Power-current Model / LECCS / Multiple Power-supply Pin LSI |
資料番号 | EMCJ2003-119 |
発行日 |
研究会情報 | |
研究会 | EMCJ |
---|---|
開催期間 | 2003/11/28(から1日開催) |
開催地(和) | |
開催地(英) | |
テーマ(和) | |
テーマ(英) | |
委員長氏名(和) | |
委員長氏名(英) | |
副委員長氏名(和) | |
副委員長氏名(英) | |
幹事氏名(和) | |
幹事氏名(英) | |
幹事補佐氏名(和) | |
幹事補佐氏名(英) |
講演論文情報詳細 | |
申込み研究会 | Electromagnetic Compatibility (EMCJ) |
---|---|
本文の言語 | JPN |
タイトル(和) | LECCSモデルの多電源ピンLSIへの拡張 |
サブタイトル(和) | |
タイトル(英) | Expansion of EMC Macro-model (LECCS) to Multiple Power-supply Pin LSI |
サブタイトル(和) | |
キーワード(1)(和/英) | 電源系高周波電流 / RF power current |
キーワード(2)(和/英) | 電源端子電流モデル / Power-current Model |
キーワード(3)(和/英) | LECCS / LECCS |
キーワード(4)(和/英) | 多電源ピンLSI / Multiple Power-supply Pin LSI |
第 1 著者 氏名(和/英) | 豊田 友博 / Tomohiro TOYOTA |
第 1 著者 所属(和/英) | 岡山大学工学部 Faculty of Engineering, Okayama University |
第 2 著者 氏名(和/英) | 南澤 裕一郎 / Yuichiro MINAMISAWA |
第 2 著者 所属(和/英) | 岡山大学工学部 Faculty of Engineering, Okayama University |
第 3 著者 氏名(和/英) | 中村 克己 / katsumi NAKAMURA |
第 3 著者 所属(和/英) | 株式会社デンソー DENSO CORPORATION |
第 4 著者 氏名(和/英) | 和田 修己 / Osami WADA |
第 4 著者 所属(和/英) | 岡山大学工学部 Faculty of Engineering, Okayama University |
第 5 著者 氏名(和/英) | 豊田 啓孝 / Yoshitaka TOYOTA |
第 5 著者 所属(和/英) | 岡山大学工学部 Faculty of Engineering, Okayama University |
第 6 著者 氏名(和/英) | 古賀 隆治 / Ryuji KOGA |
第 6 著者 所属(和/英) | 岡山大学工学部 Faculty of Engineering, Okayama University |
発表年月日 | 2003/11/28 |
資料番号 | EMCJ2003-119 |
巻番号(vol) | vol.103 |
号番号(no) | 488 |
ページ範囲 | pp.- |
ページ数 | 6 |
発行日 |