講演名 2004/7/16
マイクロストリップ線路を用いた誘電体基板のPIM特性評価(光・電波ワークショップ)
久我 宣裕, 高尾 鉄也,
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 誘電体基板の受動相互変調歪(PIM)特性を,50Ωマイクロストリップ線路を用いて実験的に評価し,PIMの発生要因を物理的条件および化学的条件の双方から考察した.銅箔粗化面粗さは,銅箔組成や厚さ等,他の条件が同一である場合にはPIMレベルの直接的な決定要因となるが,線路幅や銅箔厚など電流密度に影響を与えるパラメータによっても観測されるPIMレベルが大きく異なることを示した.また銅箔粗化面の化学的組成についてもオージェ分光法を用いて分析した結果,CrやCoなど異種金属が銅箔組成成分として含まれている材料では,PIM発生量の増加や不安定化等の現象が見られることを確認した.
抄録(英) PIM characteristics of a planar printed circuit are evaluated experimentally by using 50 -microstrip line, of which causes are examined in terms of the physical and chemical conditions. Roughness on the treated surface of a microstrip line affects the PIM generation directly when the other conditions are fixed. However, the PIM has large dependence on the structural condition of the signal line such as line width and copper-clad thickness. Chemical composition of the copper foil is also investigated by using Auger electron spectroscopy, which suggests that some dissimilar materials such as Cr or Co are included in the copper foil generating high and unstable PIM.
キーワード(和) 受動相互変調歪 / 銅張積層板 / マイクロストリップ線路 / プリントアンテナ
キーワード(英) Passive Intermodulation / microstrip line / printed antenna
資料番号 SAT2004-110
発行日

研究会情報
研究会 SAT
開催期間 2004/7/16(から1日開催)
開催地(和)
開催地(英)
テーマ(和)
テーマ(英)
委員長氏名(和)
委員長氏名(英)
副委員長氏名(和)
副委員長氏名(英)
幹事氏名(和)
幹事氏名(英)
幹事補佐氏名(和)
幹事補佐氏名(英)

講演論文情報詳細
申込み研究会 Satellite Telecommunications (SAT)
本文の言語 JPN
タイトル(和) マイクロストリップ線路を用いた誘電体基板のPIM特性評価(光・電波ワークショップ)
サブタイトル(和)
タイトル(英) PIM Characateristics Evaluation of dielectric substrates by using microstrip line
サブタイトル(和)
キーワード(1)(和/英) 受動相互変調歪 / Passive Intermodulation
キーワード(2)(和/英) 銅張積層板 / microstrip line
キーワード(3)(和/英) マイクロストリップ線路 / printed antenna
キーワード(4)(和/英) プリントアンテナ
第 1 著者 氏名(和/英) 久我 宣裕 / Nobuhiro KUGA
第 1 著者 所属(和/英) 横浜国立大学大学院
Graduate School od Yokohama National University
第 2 著者 氏名(和/英) 高尾 鉄也 / Tetsuya TAKAO
第 2 著者 所属(和/英) 東京工芸大学工学部
Faculty of Engineering, Tokyo Polytechnic University
発表年月日 2004/7/16
資料番号 SAT2004-110
巻番号(vol) vol.104
号番号(no) 206
ページ範囲 pp.-
ページ数 5
発行日