講演名 | 2017-01-19 抵抗付加法によるプリント配線板電源層からの放射雑音低減 南 龍司(佐賀大), 佐々木 伸一(佐賀大), |
---|---|
PDFダウンロードページ | PDFダウンロードページへ |
抄録(和) | 近年,情報機器の高機能化・高速化に伴い,搭載LSIの多ピン化・動作の高速化が進んでいる.このため,LSIのスイッチング動作時に生じるプリント配線板電源層からの放射雑音の増加が問題となっている.本研究室では,この放射雑音の低減を目的に,基板端電源層に整合用の抵抗を付加する方法(抵抗付加法)を提案し,本手法の有効性を確認している.本研究では,周辺部にスルーホールを有する基板における雑音低減効果と,最適抵抗値,抵抗付加ピッチの周波数特性を評価した.3次元電磁界解析より,雑音低減効果は減少し,最適抵抗値,抵抗付加ピッチの関係は電源層間付加と同様の結果となった. |
抄録(英) | Recently, information devices has high performance and the high-speed. Therefore, the radiation noise from the power supply layers in PCB has increased. We have suggested a method attaching resistor between power supply layers at the substrate edge to reduce radiation noise. This time, evaluate the circuit board having Through-hole in the periphery,and optimum resistance value, frequency characteristic of Resistor Attaching space.As a result, the effect of reducing the radiation noise decreased.Optimum resistance value and frequency characteristic became same as in the case of attaching resistor between power supply layers. |
キーワード(和) | プリント配線板 / 放射雑音 / 電源雑音 / 抵抗付加法 |
キーワード(英) | Printed Circuit Board / Radiation noise / Power supply noise / Resistor attaching method |
資料番号 | EMCJ2016-110 |
発行日 | 2017-01-12 (EMCJ) |
研究会情報 | |
研究会 | EMCJ |
---|---|
開催期間 | 2017/1/19(から2日開催) |
開催地(和) | 九州工業大学 |
開催地(英) | Kyushu Institute of Technology |
テーマ(和) | 通信,EMC一般 |
テーマ(英) | Communication, EMC |
委員長氏名(和) | 曽根 秀昭(東北大) |
委員長氏名(英) | Hideaki Sone(Tohoku Univ.) |
副委員長氏名(和) | 和田 修己(京大) |
副委員長氏名(英) | Osami Wada(Kyoto Univ.) |
幹事氏名(和) | 森岡 健浩(産総研) / 大坂 英樹(日立オートモティブシステムズ) |
幹事氏名(英) | Takehiro Morioka(AIST) / Hideki Osaka(Hitachi Automotive Systems) |
幹事補佐氏名(和) | 萓野 良樹(電通大) / 勝部 勇作(日立) / 佐々木 智江(パナソニック) |
幹事補佐氏名(英) | Yoshiki Kayano(Univ. of Electro-Comm.) / Yusaku Katsube(Hitachi) / Chie Sasaki(Panasonic) |
講演論文情報詳細 | |
申込み研究会 | Technical Committee on Electromagnetic Compatibility |
---|---|
本文の言語 | JPN |
タイトル(和) | 抵抗付加法によるプリント配線板電源層からの放射雑音低減 |
サブタイトル(和) | 周辺部スルーホールの評価 |
タイトル(英) | Reduction Technique of Radiation noise from power supply layers in PCB using Attached Resistor Method |
サブタイトル(和) | Evaluation of Circuit Board having Through-hole in periphery |
キーワード(1)(和/英) | プリント配線板 / Printed Circuit Board |
キーワード(2)(和/英) | 放射雑音 / Radiation noise |
キーワード(3)(和/英) | 電源雑音 / Power supply noise |
キーワード(4)(和/英) | 抵抗付加法 / Resistor attaching method |
第 1 著者 氏名(和/英) | 南 龍司 / Ryuji Minami |
第 1 著者 所属(和/英) | 佐賀大学(略称:佐賀大) Saga University(略称:Saga Univ) |
第 2 著者 氏名(和/英) | 佐々木 伸一 / Shinichi Sasaki |
第 2 著者 所属(和/英) | 佐賀大学(略称:佐賀大) Saga University(略称:Saga Univ) |
発表年月日 | 2017-01-19 |
資料番号 | EMCJ2016-110 |
巻番号(vol) | vol.116 |
号番号(no) | EMCJ-399 |
ページ範囲 | pp.9-14(EMCJ), |
ページ数 | 6 |
発行日 | 2017-01-12 (EMCJ) |