講演名 2016-06-23
四つのポートに相違なる基準インピーダンスを設定したストリップ結合線路による1/4波長結合線路型カプラの設計と解析
大島 毅(三菱電機), 米田 尚史(三菱電機), 宮下 裕章(三菱電機), 宮崎 守泰(三菱電機), 和田 光司(電通大),
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 本報告では,四つのポートに相違なる基準インピーダンスを設定した1/4波長結合線路型カプラの設計理論と,その妥当性の検証結果を示す.設計パラメータは,四つのポートの基準インピーダンスと結合度,及び媒質の誘電率と透磁率である.これらを設定すると,結合線路の断面構造は,単位長さあたりの静電エネルギーを所定の値に定める問題となる.ここでは,設計例としてストリップ結合線路による10dBカプラを与え,中心周波数を1GHzに設定して比帯域幅60%の周波数範囲にわたり電磁界解析を行った.その結果,設計値と電磁界解析による伝送特性は,おおむね一致することが分かった.
抄録(英) This report presents design and analysis of quarter-wave coupled-line directional couplers for setting reference impedances different from one another at four ports and also indicates the validity of design theory by electromagnetic simulation as an example of 10-dB coupler consisting of coupled strip line. Design parameters of the coupler are four kinds of reference impedances, a coupling coefficient, permittivity and permeability of medium. The cross section of coupled-line is determined by electrostatic analysis giving the design parameters. The numerical model is analyzed setting center frequency to 1GHz and over the fractional band width of 60%. As a result, it is found that the characteristics of electromagnetic simulation are in good agreement with that of design theory.
キーワード(和) カプラ / 結合線路 / 1/4波長 / 非対称断面 / c, πモード
キーワード(英) Directional Coupler / Coupled-Line / Quarter-Wavelength / Asymmetric Cross Section / c, π Modes
資料番号 MW2016-31
発行日 2016-06-16 (MW)

研究会情報
研究会 MW
開催期間 2016/6/23(から2日開催)
開催地(和) 岐阜大学
開催地(英) Gifu Univ.
テーマ(和) マイクロ波信号発生計測技術/マイクロ波一般
テーマ(英) Microwave Signal Generation and Measurement / Microwave Technologies
委員長氏名(和) 石川 容平(京大)
委員長氏名(英) Yohei Ishikawa(Kyoto Univ.)
副委員長氏名(和) 九鬼 孝夫(国士舘大) / 西川 健二郎(鹿児島大) / 田島 賢一(三菱電機)
副委員長氏名(英) Takao Kuki(Kokushikan Univ.) / Kenjiro Nishikawa(Kagoshima Univ.) / Kenichi Tajima(Mitsubishi Electric)
幹事氏名(和) 佐藤 潤二(パナソニック) / 平野 拓一(東工大)
幹事氏名(英) Junji Sato(Panasonic) / Takuichi Hirano(Tokyo Inst. of Tech.)
幹事補佐氏名(和) 關谷 尚人(山梨大) / 小野 哲(電通大)
幹事補佐氏名(英) Naoto Sekiya(Univ. of Yamanashi) / Satoshi Ono(Univ. of Electro-Comm.)

講演論文情報詳細
申込み研究会 Technical Committee on Microwaves
本文の言語 JPN
タイトル(和) 四つのポートに相違なる基準インピーダンスを設定したストリップ結合線路による1/4波長結合線路型カプラの設計と解析
サブタイトル(和)
タイトル(英) Design and Analysis of Quarter-Wave Coupled-Line Directional Couplers for Setting Reference Impedances Different from One Another at Four Ports Consisting of Coupled Strip Line
サブタイトル(和)
キーワード(1)(和/英) カプラ / Directional Coupler
キーワード(2)(和/英) 結合線路 / Coupled-Line
キーワード(3)(和/英) 1/4波長 / Quarter-Wavelength
キーワード(4)(和/英) 非対称断面 / Asymmetric Cross Section
キーワード(5)(和/英) c, πモード / c, π Modes
第 1 著者 氏名(和/英) 大島 毅 / Takeshi Oshima
第 1 著者 所属(和/英) 三菱電機株式会社(略称:三菱電機)
Mitsubishi Electric Corporation(略称:Mitsubishi Electric Corp.)
第 2 著者 氏名(和/英) 米田 尚史 / Naofumi Yoneda
第 2 著者 所属(和/英) 三菱電機株式会社(略称:三菱電機)
Mitsubishi Electric Corporation(略称:Mitsubishi Electric Corp.)
第 3 著者 氏名(和/英) 宮下 裕章 / Hiroaki Miyashita
第 3 著者 所属(和/英) 三菱電機株式会社(略称:三菱電機)
Mitsubishi Electric Corporation(略称:Mitsubishi Electric Corp.)
第 4 著者 氏名(和/英) 宮崎 守泰 / Moriyasu Miyazaki
第 4 著者 所属(和/英) 三菱電機株式会社(略称:三菱電機)
Mitsubishi Electric Corporation(略称:Mitsubishi Electric Corp.)
第 5 著者 氏名(和/英) 和田 光司 / Koji Wada
第 5 著者 所属(和/英) 電気通信大学(略称:電通大)
The University of Electro-Communications(略称:UEC)
発表年月日 2016-06-23
資料番号 MW2016-31
巻番号(vol) vol.116
号番号(no) MW-114
ページ範囲 pp.7-12(MW),
ページ数 6
発行日 2016-06-16 (MW)