講演名 2015-11-06
Observation of Break Arcs Rotated by Radial Magnetic Field in a 48VDC Resistive Circuit using two high-speed cameras
松岡 諄(静岡大), 関川 純哉(静岡大),
PDFダウンロードページ PDFダウンロードページへ
抄録(和) Break arcs are rotated with the radial magnetic field formed by a magnet embedded in a fixed cathode contact. The break arcs are generated in a 48VDC resistive circuit. The circuit current when the contacts are closed is 10A. The depth of the magnet varies from 1mm to 4mm to change the strength of the radial magnetic field for rotating break arcs. Images of break arcs are taken by two high-speed cameras from two directions and the rotational motion of the break arcs is observed. The rotational period of rotational motion of the break arcs is investigated. The following results are obtained. The break arcs rotate clockwise on the cathode surface seen from anode side. This rotation direction conforms to the direction of the Lorentz force that affects to the break arcs with the radial magnetic field. The rotational period gradually decreases during break operation. When the depth of magnet is larger, the rotational period becomes longer.
抄録(英) Break arcs are rotated with the radial magnetic field formed by a magnet embedded in a fixed cathode contact. The break arcs are generated in a 48VDC resistive circuit. The circuit current when the contacts are closed is 10A. The depth of the magnet varies from 1mm to 4mm to change the strength of the radial magnetic field for rotating break arcs. Images of break arcs are taken by two high-speed cameras from two directions and the rotational motion of the break arcs is observed. The rotational period of rotational motion of the break arcs is investigated. The following results are obtained. The break arcs rotate clockwise on the cathode surface seen from anode side. This rotation direction conforms to the direction of the Lorentz force that affects to the break arcs with the radial magnetic field. The rotational period gradually decreases during break operation. When the depth of magnet is larger, the rotational period becomes longer.
キーワード(和)
キーワード(英) Arc dischargeContact erosionHigh-speed camera
資料番号 EMD2015-75
発行日 2015-10-29 (EMD)

研究会情報
研究会 EMD
開催期間 2015/11/5(から2日開催)
開催地(和) 東北大学工学部青葉記念会館
開催地(英) Tohoku University, School of engineering, Aoba memorial hall
テーマ(和) 国際セッションIS-EMD2015 (継電器・コンタクトテクノロジ研究会、東北大学サイバーサイエンスセンター 共催)
テーマ(英) International Session IS-EMD2015
委員長氏名(和) 関川 純哉(静岡大)
委員長氏名(英) Junya Sekikawa(Shizuoka Univ.)
副委員長氏名(和) 阿部 宜輝(NTT)
副委員長氏名(英) Yoshiteru Abe(NTT)
幹事氏名(和) 澤田 滋(住友電装) / 鈴木 健司(富士電機機器制御)
幹事氏名(英) Shigeru Sawada(Sumitomo Denso) / Kenji Suzuki(Fujielectric)
幹事補佐氏名(和) 和田 真一(TMCシステム)
幹事補佐氏名(英) Shinichi Wada(TMC system)

講演論文情報詳細
申込み研究会 Technical Committee on Electromechanical Devices
本文の言語 ENG
タイトル(和)
サブタイトル(和)
タイトル(英) Observation of Break Arcs Rotated by Radial Magnetic Field in a 48VDC Resistive Circuit using two high-speed cameras
サブタイトル(和)
キーワード(1)(和/英) / Arc dischargeContact erosionHigh-speed camera
第 1 著者 氏名(和/英) 松岡 諄 / Jun Matsuoka
第 1 著者 所属(和/英) 静岡大学(略称:静岡大)
Shizuoka University(略称:Shizuoka Univ.)
第 2 著者 氏名(和/英) 関川 純哉 / Junya Sekikawa
第 2 著者 所属(和/英) 静岡大学(略称:静岡大)
Shizuoka University(略称:Shizuoka Univ.)
発表年月日 2015-11-06
資料番号 EMD2015-75
巻番号(vol) vol.115
号番号(no) EMD-291
ページ範囲 pp.47-52(EMD),
ページ数 6
発行日 2015-10-29 (EMD)