講演名 2021-06-23
ミリ波路車間通信における過去ビーム情報と合計レート時系列変化を利用したビーム割当手法
山田 雄太(慶大), 大槻 知明(慶大),
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 車両と RSU (Roadside Unit) を繋ぐV2I (Vehicle-to-Infrastructure) 通信では,車両の様々な情報を BS (Base Station) である RSU とやり取りする.5G の V2I 通信では,広帯域が確保できるミリ波帯域の利用が検討されている.ミリ波帯域は空中での伝播損失が大きいことから,ビームフォーミングを利用して長距離伝播を可能とする.コードブックを用いたビームフォーミングでは,予め決められたコードブックに基づき,ビームの射出方向が決められる.しかし V2I 通信ではモビリティによりチャネル変化が激しいため,計算時間の観点からコードブックの全探索は困難である.V2I 通信におけるビーム割当に関する従来法では非スタンドアロンネットワークを想定し,車両との低周波帯における通信で収集される周辺車両の位置情報を用いてビーム割当を行っている.しかし,この手法は RSU が周辺車両の位置情報を持っているかによって性能が変わってしまう.周辺車両の接続率が低い場合,割当精度の劣化が見られる.本稿では,割当対象車両に対する過去のビーム割当情報やレートの時系列変化を特徴量として用いることで,RSU において周辺車両配置が収集できない場合にも割当対象車両の情報のみでビーム割当を行う手法を提案する.計算機シミュレーションにより,提案法がRSU で周辺車両配置が収集できない場合でも,割当精度の劣化を抑えることを示す.
抄録(英) In V2I (Vehicle-to-Infrastructure) communication that connects a vehicle and RSUs (Roadside Unit), various information about the vehicles is exchanged with the RSU, which is a BS (Base Station). For 5G V2I communication, the use of millime-ter-wave bands that can secure a wide band is being considered. Since the millimeter-wave band has a large propagation loss in the air, beamforming is used to enable long-distance propagation. In beamforming using a codebook, the beam ejection direction is determined based on a predetermined codebook. However, in V2I communication, it is difficult to search the entire codebook from the viewpoint of calculation time because the channel changes drastically due to mobility. In the con-ventional method for beam alignment in V2I communication, a non-standalone network is assumed, and beam alignment is performed using the position information of surrounding vehicles collected by communication in the low frequency band with the vehicles. However, the performance of this method depends on whether the RSU has the location information of surrounding vehicles. When the connected rate of surrounding vehicles is low, the alignment accuracy deteriorates. In this paper, by using the past beam alignment information for the target vehicle and the time-series validation of the sum rate as the features, even if the peripheral vehicle arrangement cannot be collected in the RSU, the beam alignment is performed only with the information of the allocation target vehicle. suggest. Computer simulation shows that even if the proposed method is RSU and the surrounding vehicle arrangement cannot be collected, the deterioration of allocation accuracy is sup-pressed.
キーワード(和) ミリ波通信 / V2I通信 / 自動運転
キーワード(英) mmWave Communication / V2I Communication / Autonomous Driving
資料番号 RCS2021-42
発行日 2021-06-16 (RCS)

研究会情報
研究会 RCS
開催期間 2021/6/23(から3日開催)
開催地(和) オンライン開催
開催地(英) Online
テーマ(和) 初めての研究会,リソース制御,スケジューリング,無線通信一般
テーマ(英) First Presentation in IEICE Technical Committee, Resource Control, Scheduling, Wireless Communications, etc.
委員長氏名(和) 岡本 英二(名工大)
委員長氏名(英) Eiji Okamoto(Nagoya Inst. of Tech.)
副委員長氏名(和) 児島 史秀(NICT) / 西村 寿彦(北大) / 旦代 智哉(東芝)
副委員長氏名(英) Fumihide Kojima(NICT) / Toshihiko Nishimura(Hokkaido Univ.) / Tomoya Tandai(Toshiba)
幹事氏名(和) 山本 哲矢(パナソニック) / 村岡 一志(NEC)
幹事氏名(英) Tetsuya Yamamoto(Panasonic) / Kazushi Muraoka(NEC)
幹事補佐氏名(和) 安達 宏一(電通大) / 中村 理(シャープ) / 酒井 学(三菱電機) / 岩渕 匡史(NTT) / 奥山 達樹(NTTドコモ)
幹事補佐氏名(英) Koichi Adachi(Univ. of Electro-Comm.) / Osamu Nakamura(Sharp) / Manabu Sakai(Mitsubishi Electric) / Masashi Iwabuchi(NTT) / Tatsuki Okuyama(NTT DOCOMO)

講演論文情報詳細
申込み研究会 Technical Committee on Radio Communication Systems
本文の言語 JPN
タイトル(和) ミリ波路車間通信における過去ビーム情報と合計レート時系列変化を利用したビーム割当手法
サブタイトル(和)
タイトル(英) MmWave V2I Beam Alignment with Past Beam Information and Time-Series Validation of CVs’ Sum Rate
サブタイトル(和)
キーワード(1)(和/英) ミリ波通信 / mmWave Communication
キーワード(2)(和/英) V2I通信 / V2I Communication
キーワード(3)(和/英) 自動運転 / Autonomous Driving
第 1 著者 氏名(和/英) 山田 雄太 / Yuta Yamada
第 1 著者 所属(和/英) 慶應義塾大学(略称:慶大)
Keio University(略称:Keio Univ.)
第 2 著者 氏名(和/英) 大槻 知明 / Tomoaki Ohtsuki
第 2 著者 所属(和/英) 慶應義塾大学(略称:慶大)
Keio University(略称:Keio Univ.)
発表年月日 2021-06-23
資料番号 RCS2021-42
巻番号(vol) vol.121
号番号(no) RCS-72
ページ範囲 pp.81-86(RCS),
ページ数 6
発行日 2021-06-16 (RCS)