講演名 2019-04-11
ノイズ源等価回路モデルを用いたDC/DCコンバータにおける伝導妨害波電圧の予測精度向上に向けた検討
上松 大志(岡山大), 大崎 悠平(岡山大), 矢野 佑典(岡山大), 五百旗頭 健吾(岡山大), 豊田 啓孝(岡山大),
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 我々は伝導妨害波電圧の予測を行うためのノイズ源等価回路モデルを降圧型DC/DCコンバータへ適用を試みている.予測精度の高いモデルパラメータ同定を行うために使用する実測の組み合わせには負荷抵抗の値を変えるのではなく,バイパスコンデンサの値を変えたものを用いることが良いことがこれまでにわかっている.これはバイパスコンデンサを用いることによりスイッチング動作そのものには影響を及ぼさず高周波ノイズ電流のみを変えることが可能なためである.しかし,同定に使用したバイパスコンデンサの組み合わせ方によっても予測精度は変わるため,予測精度の高い組み合わせを知る必要がある.そのため,本稿では連立方程式を解く際の尺度である条件数を使用して組み合わせ方により条件数の比較を行い予測精度との関係性を調べた.この際予測精度と実測の差であるシミュレーション誤差と条件数の関係を利用した.この関係を用いて条件数に境界値をとることで,予測に用いられる周波数を限定した.これより出力電圧の10 MHz付近における誤差が減少し,実測とシミュレーションの差がおよそ10 dB以下となった.
抄録(英) We have applied the noise-source equivalent-circuit model to predict the conducted disturbance voltage to the DC/DC buck converter. It has been known that it is better to use a different value of the bypass capacitor instead of changing the value of the load resistance as the combination of actual measurements used to identify model parameters with high prediction accuracy. This is because by using a bypass capacitor it is possible to change only the high frequency noise current without affecting the switching operation itself. However, the prediction accuracy also changes depending on the combination of bypass capacitors used for identification, so it is necessary to know the combination with high prediction accuracy. Therefore, in this paper, we compare the condition numbers by the combination method using the condition number which is the scale when solving the simultaneous equations, and investigate the relationship with the prediction accuracy. At this time, the relationship between the simulation error and the condition number, which is the difference between the prediction accuracy and the actual measurement, was used. By taking the boundary value to the condition number using this relationship, the frequency used for prediction was limited. From this, the error near 10 MHz of the output voltage is reduced, and the difference between the actual measurement and the simulation becomes less than about 10 dB.
キーワード(和) DC/DCコンバータ / 伝導妨害波 / ノイズ源等価回路モデル / 条件数
キーワード(英) DC/DC converter / Conduction disturbance / Noise-source equivalent circuit / Condition number
資料番号 EMCJ2019-4
発行日 2019-04-04 (EMCJ)

研究会情報
研究会 EMCJ
開催期間 2019/4/11(から2日開催)
開催地(和) 沖縄産業支援センター
開催地(英) Okinawa Industry Support Center
テーマ(和) EMC一般
テーマ(英) EMC
委員長氏名(和) 和田 修己(京大)
委員長氏名(英) Osami Wada(Kyoto Univ.)
副委員長氏名(和) 王 建青(名工大)
副委員長氏名(英) Kensei Oh(Nagoya Inst. of Tech.)
幹事氏名(和) 青柳 貴洋(東工大) / 白木 康博(三菱電機)
幹事氏名(英) Takahiro Aoyagi(Tokyo Inst. of Tech.) / Yasuhiro Shiraki(Mitsubishi Electric)
幹事補佐氏名(和) 長澤 忍(三菱電機) / 山本 真一郎(兵庫県立大) / 鵜生 高徳(デンソー)
幹事補佐氏名(英) Shinobu Nagasawa(Mitsubishi Electric) / Shinichiro Yamamoto(Univ. of Hyogo) / Takanori Unou(Denso)

講演論文情報詳細
申込み研究会 Technical Committee on Electromagnetic Compatibility
本文の言語 JPN
タイトル(和) ノイズ源等価回路モデルを用いたDC/DCコンバータにおける伝導妨害波電圧の予測精度向上に向けた検討
サブタイトル(和)
タイトル(英) Prediction Accuracy in Conduction Disturbance Voltage of DC/DC Buck Converter Using Noise-source Equivalent-circuit Model
サブタイトル(和)
キーワード(1)(和/英) DC/DCコンバータ / DC/DC converter
キーワード(2)(和/英) 伝導妨害波 / Conduction disturbance
キーワード(3)(和/英) ノイズ源等価回路モデル / Noise-source equivalent circuit
キーワード(4)(和/英) 条件数 / Condition number
第 1 著者 氏名(和/英) 上松 大志 / Taishi Uematsu
第 1 著者 所属(和/英) 岡山大学(略称:岡山大)
Okayama University(略称:Okayama Univ.)
第 2 著者 氏名(和/英) 大崎 悠平 / Yuhei Osaki
第 2 著者 所属(和/英) 岡山大学(略称:岡山大)
Okayama University(略称:Okayama Univ.)
第 3 著者 氏名(和/英) 矢野 佑典 / Yusuke Yano
第 3 著者 所属(和/英) 岡山大学(略称:岡山大)
Okayama University(略称:Okayama Univ.)
第 4 著者 氏名(和/英) 五百旗頭 健吾 / Kengo Iokibe
第 4 著者 所属(和/英) 岡山大学(略称:岡山大)
Okayama University(略称:Okayama Univ.)
第 5 著者 氏名(和/英) 豊田 啓孝 / Yoshitaka Toyota
第 5 著者 所属(和/英) 岡山大学(略称:岡山大)
Okayama University(略称:Okayama Univ.)
発表年月日 2019-04-11
資料番号 EMCJ2019-4
巻番号(vol) vol.119
号番号(no) EMCJ-1
ページ範囲 pp.17-22(EMCJ),
ページ数 6
発行日 2019-04-04 (EMCJ)