講演名 2019-02-15
500VDC/10A抵抗性回路内で磁気吹き消しされる開離時アークの形状に対する磁石の横幅の影響
金子 裕汰(静岡大), 関川 純哉(静岡大),
PDFダウンロードページ PDFダウンロードページへ
抄録(和) 直流高電圧回路において,Ag接点対を等速で開離して開離時アークを発生させ,磁気吹き消しにより消弧させた.接点接触開離時の回路電流I0を10A,電源電圧Eを200-500Vとした.また,開離時アークの水平方向での変形を単純化させるため,永久磁石の横の長さWを20,30,40,及び50mmと変化させた.その様子を2台の高速カメラで水平方向と垂直方向の2方向から同時に撮影し,画像から開離時アークの形状を解析して,アーク継続時間Dを調べた.その結果, アーク継続時間Dは電源電圧Eと磁石の横の長さWに依存しなかった.また,電源電圧Eが大きいほど,開離時アークの水平方向の中心部の曲がり方は大きくなり,磁石の横の長さWが大きくなると,開離時アークの水平方向の中心部の曲がり方が小さくなり,M字状から直線状になった.
抄録(英) Silver electrical contacts are separated at constant opening speed in a 500VDC resistive circuit. Break arcs are extinguished by magnetic blow-out. Circuit current when contacts are closed is 10A. Supply voltage is varied between 200-500V. In order to simplify horizontal deformation of the break arcs, width of permanents magnet is varied to 20, 30, 40, and 50 mm. The break arcs are photographed from two directions of the front and top sides using two high speed cameras. The shape of break arcs is analyzed by the images of the break arcs taken by the high-speed cameras. And arc duration is investigated. The following results are shown. Arc duration is not depend on the supply voltage and the width of the magnet. The curve of central portion in the horizontal direction of the break arcs increases with increasing supply voltage. The curve of central portion in the horizontal direction of the break arcs decreases with increasing width of the magnets. And the shape of break arc becomes liner from M shape.
キーワード(和) 電気接点 / 電磁リレー / 永久磁石 / 高速度カメラ
キーワード(英) Electrical contact / Electromagnetic relay / Permanent magnet / High speed camera
資料番号 R2018-53,EMD2018-54
発行日 2019-02-08 (R, EMD)

研究会情報
研究会 EMD / R
開催期間 2019/2/15(から1日開催)
開催地(和) パナソニック企業年金基金 松心会館
開催地(英)
テーマ(和) 機構デバイスの信頼性、信頼性一般 (共催:信頼性研究会,継電器・コンタクトテクノロジ研究会,IEEE EPS JAPAN)
テーマ(英)
委員長氏名(和) 和田 真一(TMCシステム) / 弓削 哲史(防衛大)
委員長氏名(英) Shinichi Wada(TMC System) / Tetsushi Yuge(National Defense Academy)
副委員長氏名(和) 萓野 良樹(電通大) / 安里 彰(富士通)
副委員長氏名(英) Yoshiki Kayano(Univ. of Electro-Comm.) / Akira Asato(Fujitsu)
幹事氏名(和) 水上 雅人(室蘭工大) / 鈴木 健司(富士電機機器制御) / 田村 信幸(法政大) / 平栗 滋人(鉄道総研)
幹事氏名(英) Masato Mizukami(Muroran Inst. of Tech.) / Kenji Suzuki(Fuji Electric) / Nobuyuki Tamura(Hosei Univ.) / Shigeto Hiraguri(RTRI)
幹事補佐氏名(和) 林 優一(奈良先端大) / 井上 真二(関西大) / 岡村 寛之(広島大)
幹事補佐氏名(英) Yuichi Hayashi(NAIST) / Shinji Inoue(Kansai Univ.) / Hiroyuki Okamura(Hiroshima Univ.)

講演論文情報詳細
申込み研究会 Technical Committee on Electromechanical Devices / Technical Committee on Reliability
本文の言語 JPN
タイトル(和) 500VDC/10A抵抗性回路内で磁気吹き消しされる開離時アークの形状に対する磁石の横幅の影響
サブタイトル(和)
タイトル(英) Influence of width of magnets on shape of break arcs magnetically blown-out in a 500VDC/10A resistive circuit
サブタイトル(和)
キーワード(1)(和/英) 電気接点 / Electrical contact
キーワード(2)(和/英) 電磁リレー / Electromagnetic relay
キーワード(3)(和/英) 永久磁石 / Permanent magnet
キーワード(4)(和/英) 高速度カメラ / High speed camera
第 1 著者 氏名(和/英) 金子 裕汰 / Yuta Kaneko
第 1 著者 所属(和/英) 静岡大学(略称:静岡大)
Shizuoka University(略称:Shizuoka Univ.)
第 2 著者 氏名(和/英) 関川 純哉 / Sekikawa Junya
第 2 著者 所属(和/英) 静岡大学(略称:静岡大)
Shizuoka University(略称:Shizuoka Univ.)
発表年月日 2019-02-15
資料番号 R2018-53,EMD2018-54
巻番号(vol) vol.118
号番号(no) R-446,EMD-447
ページ範囲 pp.7-12(R), pp.7-12(EMD),
ページ数 6
発行日 2019-02-08 (R, EMD)