Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
EMD, WPT, EMCJ, PEM (Joint) |
2022-07-15 14:25 |
Tokyo |
(Primary: On-site, Secondary: Online) |
A study on thin microstrip line with ground slit on flexible circuit for optical transceivers. Yuya Yamaguchi (AGU), Akihisa Tsuchiya (KISTEC), Masahiro Takeda, Eiji Inami (Yamashita Materials), Hideaki Sugama (KISTEC), Osamu Hashimoto, Ryosuke Suga (AGU) |
The high-speed optical communications and small devices were required for development of 5G and datacenter and low-loss ... [more] |
|
EST |
2020-01-31 09:55 |
Oita |
Beppu International Convention Center |
A Basic Study on Low Loss Flexible Microstrip Line by Using Slits on Ground Takeshi Yoshihara (AGU), Akihisa Tsuchiya (KISTE), Ryosuke Suga (AGU), Hideaki Sugama (KISTE), Osamu Hashimoto (AGU) EST2019-91 |
Thin flexible printed circuits are required with the miniaturization of electronic devices. The narrow signal line is re... [more] |
EST2019-91 pp.63-66 |
EMCJ, IEE-EMC |
2018-05-25 14:00 |
Nagano |
|
Study on Complex Permitting of Printed Circuit Board Material and Transmission Characteristics at GHz Band Ren Kitahara, Taiki Yamagiwa (NIT,Nagano College), Masahiro Tomioka (Akita Univ.), Atsushi Nakamura (UTI), Hideki Takeuchi (Nagano Pref. General Industrial Tech Center), Takashi Kasuga (NIT,Nagano College) EMCJ2018-7 |
Due to the frequency dispersion of the dielectric constant of the printed circuit board in the GHz band, it is a factor ... [more] |
EMCJ2018-7 pp.7-12 |
EMCJ |
2017-03-10 14:00 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Investigation on Characteristic Impedance of Differential Transmission Line in Meshed-ground Flexible Printed Circuit Yantao Zhu, Fengchao Xiao (Univ. of Electro-Communications), Xiangyang Sun (Univ. of Electronic Science and Technology of China), Yoshiki Kayano, Yoshio Kami (Univ. of Electro-Communications) EMCJ2016-121 |
Meshed ground planes are extensively used in today’s flexible printed circuit (FPC) board because of its flexibility in ... [more] |
EMCJ2016-121 pp.5-10 |
EMCJ |
2016-04-15 16:20 |
Ishikawa |
Kanazawa Univ. |
[Special Talk]
EMC and electromagnetic wave technologies in Ishikawa Prefecture Yoshiyuki Yoshimura, Hirokazu Sugiura, Yuji Yonezawa, Naotaka Kato (IRII), Satoshi Yagitani (Kanazawa Univ.) EMCJ2016-8 |
The Industrial Research Institute of Ishikawa (IRII) promotes technical support for the local industry in Ishikawa Prefe... [more] |
EMCJ2016-8 pp.41-45 |
ICD, MW |
2016-03-02 10:00 |
Hiroshima |
Hiroshima University |
A Study of Multilayer Printed Wiring Boards Using the Anisotropic Conductive Paste Hidenori Ishibashi (MELCO), Kenji Nagase (MEE), Tetsu Owada, Yoichi Kitamura, Naofumi Yoneda, Hiroaki Miyashita (MELCO) MW2015-173 ICD2015-96 |
In recent years, the resin multilayer wiring boards are used in the radio frequency circuits. They use through hole via ... [more] |
MW2015-173 ICD2015-96 pp.1-4 |
EMCJ |
2013-04-12 11:30 |
Okayama |
Okayama Univ. |
Quantitative estimation of total EMI radiation with normal-mode and common-mode antenna models Tetsushi Watanabe (Industrial Technology Center of Okayama Prefecture), Yuri Wakaduki, Yoshitaka Toyota, Kengo Iokibe (Okayama Univ.) EMCJ2013-2 |
The currents of two modes, normal mode and common mode flow along two-conductor lines placed in the air. We have so far ... [more] |
EMCJ2013-2 pp.7-12 |
EMCJ, ITE-BCT |
2013-03-08 10:15 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
ESD Noise Propagation Mechanism of the Transmission Line in the Same Side as the Injection Point on PCB Tsutomu Hara, Yasumaro Komiya, Takashi Suga, Hideki Osaka, Hitoshi Yokota (Hitachi) EMCJ2012-125 |
The behavior of ESD noise was analyzed by experiments and numerical simulation. ESD was directly applied to the GND trac... [more] |
EMCJ2012-125 pp.13-18 |
EMD |
2013-01-25 13:35 |
Kanagawa |
Hitachi, Ltd., (Totsuka, Yokohama) |
[Invited Talk]
The latest trend of PCB pattern design technique for LSI stable operation, suppressing noise and high speed serial interface Akihiro Tanaka, Hiroyuki Motoki, Hideyuki Nakanishi (Aica Kogyo) EMD2012-97 |
A design method for power distribution network of printed circuit board (PCB) adopting the parameters of input impedance... [more] |
EMD2012-97 p.1 |
MW (Workshop) |
2012-08-08 - 2012-08-10 |
Overseas |
Chulalongkorn University, Bangkok, Thailand |
Broadband Printed Monopole Antenna with Single Notched Band for Wireless Communication Applications Nipont Tangthong (Bangkok Thailand), Virote Pirajnenchai (Pathumthani Thailand) |
Broadband printed monopole antenna with single notched band is presented. The proposed antenna consists of a circular pa... [more] |
|
EMCJ |
2012-01-27 15:05 |
Fukuoka |
Kyushu Univ. |
Capacitance addition for reduction of Far-End-Crosstalk Kazuaki Terashima, Shinichi Sasaki, Akihiro Fukuda (Saga Univ) EMCJ2011-126 |
In recent years, crosstalk reduction between parallel Signal Lines is one of the important problem with improvement in t... [more] |
EMCJ2011-126 pp.87-92 |
VLD, CPSY, RECONF, IPSJ-SLDM [detail] |
2012-01-25 15:20 |
Kanagawa |
Hiyoshi Campus, Keio University |
A Proposal of Signal Integrity Improvement Method Using Impedance-reconfiguration Technique Moritoshi Yasunaga, Hiroki Shimada, Shohei Akita, Takuya Adachi, Hidetoshi Ishijima, Yusuke Kuribara (Univ. of Tsukuba) VLD2011-100 CPSY2011-63 RECONF2011-59 |
New techniques are strongly desired for signal integrity improvement on PCB traces in GHz-era because conventional imped... [more] |
VLD2011-100 CPSY2011-63 RECONF2011-59 pp.55-60 |
VLD, DC, IPSJ-SLDM, CPSY, RECONF, ICD, CPM (Joint) [detail] |
2011-11-28 14:40 |
Miyazaki |
NewWelCity Miyazaki |
Waveform-Improvement of High-speed Signals on Branch Traces on PCBs Yusuke Kuribara, Shohei Akita, Hiroki Shimada, Takuya Adachi, Hidetoshi Ishijima (Univ. Tsukuba), Ikuo Yoshihara (Univ. Miyazaki), Moritoshi Yasunaga (Univ. Tsukuba) CPM2011-152 ICD2011-84 |
Recently, it is a serious problem that the signal integrity of high-speed signals transmitting on PCB traces deteriorate... [more] |
CPM2011-152 ICD2011-84 pp.19-24 |
EMCJ |
2011-01-28 12:45 |
Kumamoto |
Kumamoto National College of Technology |
Capacitor addition system for the reduction of far-end crosstalk Kazuaki Terashima, Shinichi Sasaki (Saga Univ) EMCJ2010-108 |
Crosstalk reduction in wiring of a high-density wiring board and also LSI was one of the important problem.In this labor... [more] |
EMCJ2010-108 pp.49-53 |
VLD, DC, IPSJ-SLDM, CPSY, RECONF, ICD, CPM (Joint) [detail] |
2010-11-29 11:40 |
Fukuoka |
Kyushu University |
Evaluation of Signal-Integrity Improvement Capability of the Segmental Transmission Line
-- In Its Application to Lines Including Inductances -- Hiroki Shimada, Shohei Akita, Masami Ishiguro, Moritoshi Yasunaga, Noriyuki Aibe (Univ. of Tsukuba), Ikuo Yoshihara (Univ. of Miyazaki) CPM2010-127 ICD2010-86 |
In recent years, signal integrity(SI) is becoming very serious problem in the area of transmitting high-frequency-digita... [more] |
CPM2010-127 ICD2010-86 pp.19-24 |
MW |
2010-09-10 10:00 |
Tokyo |
Tokyo Inst. of Tech. |
BIT line band-pass filter consisting of FR-4 substrate at Millimeter wave frequencies Hiroyuki Kawagashira, Yusuke Omote, Futoshi Kuroki (KNCT) MW2010-77 |
The bilaterally metal-loaded tri-plate transmission line band-pass filter by using FR-4 substrate was designed and evalu... [more] |
MW2010-77 pp.61-64 |
EMCJ |
2010-01-22 09:30 |
Okinawa |
University of the Ryukyus |
Development of a Equivalent Circuit Model with Transmission Line Model for Designing Filter Formed on Printed Circuit Boards Keisuke Matsumoto, Yoshitaka Toyota, Kengo Iokibe, Ryuji Koga (Okayama Univ.) EMCJ2009-112 |
Slit pattern formed on return plane of printed circuit boards behaves like a passive element. A defected ground structur... [more] |
EMCJ2009-112 pp.81-86 |
VLD, DC, IPSJ-SLDM, CPSY, RECONF, ICD, CPM (Joint) [detail] |
2009-12-03 10:40 |
Kochi |
Kochi City Culture-Plaza |
Evaluation of Waveform-Improvement performance on the Segmental Transmission Line Yuki Shimauchi, Hiroshi Nakayama, Yoshiki Yamaguchi, Noriyuki Aibe (Tsukuba Univ.), Ikuo Yoshihara (Miyazaki Univ.), Moritoshi Yasunaga (Tsukuba Univ.) CPM2009-145 ICD2009-74 |
As processor-speed increases, high-speed signal-propagation in the PCB traces following the processor-speed is also requ... [more] |
CPM2009-145 ICD2009-74 pp.63-68 |
VLD, DC, IPSJ-SLDM, CPSY, RECONF, ICD, CPM (Joint) [detail] |
2009-12-03 11:00 |
Kochi |
Kochi City Culture-Plaza |
[Invited Talk]
Study on the Signal Integrity Design of a High-Speed LSI and a Printed Circuit Board Seiichi Saito, Keitaro Yamagishi (Mitsubishi Electric) CPM2009-146 ICD2009-75 |
This paper describes the signal integrity design focusing on the signal reflection which should be considered in design ... [more] |
CPM2009-146 ICD2009-75 pp.69-74 |
EMCJ |
2009-06-05 09:40 |
Tokyo |
Tokyo Big Sight (Tokyo International Exihibition Center) |
Evaluation of transmission characteristic on relative humidity for flexible printed circuit board in microwave band Akihisa Tsuchiya, Hideaki Sugama, Masami Sakurai, Naomi Hidaka (Kanagawa Ind. Tech Center), Osamu Hashimoto (Aoyama Gakuin Univ.) EMCJ2009-22 |
We evaluated transmission characteristics of microstrip line and coupled microstrip line fabricated with PI films in rel... [more] |
EMCJ2009-22 pp.1-5 |