Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
MBE |
2024-05-11 14:20 |
Toyama |
|
Design of a Workflow for Removing Unnecessary Components in 3D Mesh Model Toward the Automation of Spinal Orthosis Production Based on CT Images of Individual Users Takahiro Koga, Shintaro Kasai, Hiroaki Wagatsuma (Kyutech) |
(To be available after the conference date) [more] |
|
NC, MBE (Joint) |
2024-03-12 11:40 |
Tokyo |
The Univ. of Tokyo (Primary: On-site, Secondary: Online) |
Research Trends in 3D Foot Scanning for Health Assessment
-- Aiming to improve the Ashiken Foot Printer -- Katsuaki Miike (Shinshu Junior Col.), Mizue Kayama (Shinshu Univ.) MBE2023-79 |
Diagnosis feet by a specialist such as a doctor or reading of the skeletal structure of the foot by x-ray or CT scan are... [more] |
MBE2023-79 pp.58-63 |
WIT, HI-SIGACI |
2023-12-06 13:25 |
Tokyo |
AIST Tokyo Waterfront (TBD) |
Comparison of foot orthosis made of PLA (Poly-Lactic Acid) resin material and glass wool-impregnated polypropylene resin material using a 3D printer Tadasuke Onishi (JIU), Kinatu Fukushima (Chiba Rehab) WIT2023-26 |
Thermoplastics are commonly used in the production of handmade foot orthoses. In particular, polyethylene and polypropy... [more] |
WIT2023-26 pp.9-12 |
EMT, IEE-EMT |
2023-11-10 10:45 |
Yamaguchi |
Kaikyo Messe Shimonoseki |
Demonstration for Linear-Circular Polarization Converter Fabricated by 3D Printer in 300 GHz Band Shonosuke Hirokawa, Kiyoto Asakawa (TMCIT), hijiri shimokawadoko, Michihiko Suhara (TMU) EMT2023-73 |
In recently, the terahertz band (frequencies above 300 GHz), which is currently not in commercial use, is expected to be... [more] |
EMT2023-73 pp.58-63 |
ET, IPSJ-CLE |
2023-06-18 10:00 |
Tokyo |
Tokyo Metropolitan University (Primary: On-site, Secondary: Online) |
Learning Effects of Lathe-Turned Model Product using 3D Printer for Manufacturing Education Kimika Hamamura, Sho Ooi (OIT) ET2023-8 |
When teaching a classroom course on machine tools, machined brass or stainless steel parts are brought into the classroo... [more] |
ET2023-8 pp.25-31 |
MW |
2023-05-19 13:00 |
Kyoto |
Ritsumeikan University (Primary: On-site, Secondary: Online) |
Downsized OMT with an offset axial direction port Hidenori Yukawa, Ryuya Seki, Toru Fukasawa, Yoshio Inasawa (Mitsubishi Electric corp.) MW2023-17 |
The miniaturization of OMT (Ortho-Mode-Transducer) is one of the development issues in antenna feed systems for satellit... [more] |
MW2023-17 pp.43-48 |
EMD |
2023-03-03 13:45 |
Saitama |
NIT and Online (Primary: On-site, Secondary: Online) |
Research on mechanism for bathing assistance for disabilities Hirokazu Saito, Ryo Nagase (CIT) EMD2022-23 |
The purpose of this study was to develop an arm-supporting mechanism that enables a patient with physical disabilities t... [more] |
EMD2022-23 pp.15-18 |
AP |
2022-05-19 14:50 |
Hyogo |
Kobe Port Oasis (Primary: On-site, Secondary: Online) |
Gradient Index Lens Using Perforated Dielectric Wenyi Shao, Qiang Chen (Tohoku Univ.) AP2022-19 |
As the frequency of wireless communications of the next-generation becomes higher and higher, array antennas of high gai... [more] |
AP2022-19 pp.45-50 |
WIT, IPSJ-AAC |
2022-03-09 09:55 |
Online |
Online |
Development of joint and tongue models by 3D printer for the education of visually impaired students Kouhei Oya, Tetsuya Watanabe (Niigata Univ.), Yoichi Hosokawa (Meiko Univ.) WIT2021-50 |
By using 3D printers, we developed anatomy models, eight joint models and twelve tongue models for acupuncture and massa... [more] |
WIT2021-50 pp.41-46 |
RCS, SR, SRW (Joint) |
2022-03-04 16:50 |
Online |
Online |
Design and Implementation of Narrow-Band Waveguide Band Pass Filter Based on 3D Printing Technology Aerman Tuerxun, Ping Du, Akihiro Nakao (UTokyo) RCS2021-294 |
With the development of communication technology and the rapid increase of communication devices, the frequency bands fo... [more] |
RCS2021-294 pp.212-217 |
HPB (2nd) |
2022-02-28 16:23 |
Online |
Online |
A Portable IoT Devices Enabling Real-Time Monitoring of Indoor Air-Quality Data Zhaode Ding, Masayuki Iwai (TDU) |
(To be available after the conference date) [more] |
|
MW |
2021-11-19 10:20 |
Kagoshima |
Kagoshima University (Primary: On-site, Secondary: Online) |
Study on complex permittivity measurements for dielectric plates using a 3D printed 2.4GHz band cavity resonator Yusuke Morita, Takashi Shimizu (Utsunomiya Univ.) MW2021-76 |
We investigate a measurement accuracy of complex permittivity using a low-cost and lightweight 2.4 GHz cavity resonator ... [more] |
MW2021-76 pp.52-57 |
SIP, IT, RCS |
2021-01-21 09:00 |
Online |
Online |
LoRa RSSI Measurements based on the Three-dimensional Printer Issei Makino, Nobuhiko Miki (Kagawa Univ.) IT2020-63 SIP2020-41 RCS2020-154 |
In recent years, the demand for indoor IoT has been increasing, as exemplified by factory automation. The indoor propaga... [more] |
IT2020-63 SIP2020-41 RCS2020-154 pp.1-5 |
WIT, HI-SIGACI |
2020-12-10 14:30 |
Online |
Online |
3D model supplying service for blind people
-- Analysis of the service usage and questionnaire responses -- Tetsuya Watanabe (Niigata Univ.), Kazunori Minatani (DNC), Masakazu Iwamura (Osaka Pref. Univ.) WIT2020-19 |
To realize a society in which visually impaired people can obtain and touch what they want to know whenever they like an... [more] |
WIT2020-19 pp.7-12 |
MW |
2019-11-15 13:40 |
Okinawa |
Minami Daido Villa. Tamokuteki Koryu Center |
Study on complex permittivity measurements of thermoplastic resins for 3D printer using NRD guide Takashi Shimizu, Takuma Konno, Yoshinori Kogami (Utsunomiya Univ.) MW2019-117 |
Complex permittivity measurement method of thermal plastic resin rod are studied using millimeter wave transmission char... [more] |
MW2019-117 pp.99-103 |
EMCJ, MW, EST, IEE-EMC [detail] |
2019-10-24 11:15 |
Miyagi |
Tohoku Gakuin University(Conf. Room 2, Eng. Bldg. 1) |
T-Junction OMT with 45-degree tilted Waveguide Ports Hidenori Yukawa, Yu Ushijima, Toru Takahashi, Naofumi Yoneda, Moriyasu Miyazaki (Mitsubishi Ele. Corp.) EMCJ2019-41 MW2019-70 EST2019-49 |
A T-junction OMT (Ortho-Mode-Transducer) is well known as one of waveguide components that separate two orthogonal linea... [more] |
EMCJ2019-41 MW2019-70 EST2019-49 pp.27-32 |
SSS |
2019-09-24 13:00 |
Tokyo |
|
Analysis of dielectric breakdown characteristics for additive manufacturing materials made by selective laser sintering Hiroaki Arai, Yuki Yamauchi, Takeshi Ueno (TIRI) SSS2019-17 |
Additive Manufacturing (3D printer) can easily design and make parts with complex shapes. Because of that, it is used in... [more] |
SSS2019-17 pp.1-4 |
SANE |
2019-08-23 16:20 |
Tokyo |
Electric Navigation Research Institute |
[Special Talk]
Visualization of Aviation Weather for Education and Safety Naoki Arai, Daisaku Noma (Tokai Univ.) SANE2019-45 |
Weather is an large factor for aircraft operation. It is essential for safe and efficient operation that good decision m... [more] |
SANE2019-45 pp.55-58 |
MW, EST, OPE, MWP, EMT, IEE-EMT, THz [detail] |
2019-07-18 13:40 |
Hokkaido |
Hakodate City Central Library |
Design and Evaluation of 3-Dimensional Printed Reflector Fresnel Lens Antenna Based on Acrylonitrile Butadiene Styrene Plastics for W-Band Millimeter-Wave Radar Applications Shunichi Futatsumori, Nobuhiro Sakamoto, Tomio Soga (ENRI) EMT2019-13 MW2019-26 OPE2019-17 EST2019-15 MWP2019-13 |
This report discusses the design and evaluation of 3-dimensional (3D) printed reflector Fresnel lens antenna based on Ac... [more] |
EMT2019-13 MW2019-26 OPE2019-17 EST2019-15 MWP2019-13 pp.41-45 |
MW, ICD |
2019-03-14 10:30 |
Okinawa |
|
Millimeter wave complex permittivity measurements of dielectric disks with different internal structures using the WG mode method Kota Tsunoda, Takashi Shimizu, Yoshinori Kogami (Utsunomiya Univ.) MW2018-157 ICD2018-101 |
A FDM type 3D printer can output a dielectric substrate for millimeter wave circuit by laminating a thermoplastic resin.... [more] |
MW2018-157 ICD2018-101 pp.7-12 |