Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
EMD, WPT, EMCJ, PEM (Joint) |
2022-07-15 14:25 |
Tokyo |
(Primary: On-site, Secondary: Online) |
A study on thin microstrip line with ground slit on flexible circuit for optical transceivers. Yuya Yamaguchi (AGU), Akihisa Tsuchiya (KISTEC), Masahiro Takeda, Eiji Inami (Yamashita Materials), Hideaki Sugama (KISTEC), Osamu Hashimoto, Ryosuke Suga (AGU) |
The high-speed optical communications and small devices were required for development of 5G and datacenter and low-loss ... [more] |
|
EMCJ |
2016-11-25 10:30 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Radiated Emission Analysis with Electromagnetic Simulation for Printed Circuit Boards Kodai Katagiri, Norihiko Akashi, Sotome Hideyuki, Takaya Muto (Mitsubishi Electric Corp.) EMCJ2016-89 |
It is necessary to design printed circuit boards of the electronic equipment in consideration of restraining radiated em... [more] |
EMCJ2016-89 pp.7-11 |
EMD, CPM, OME |
2016-06-17 16:20 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Magnetic Pulse Welding of Copper Foils on Rigid and Flexible Printed Circuit Boards (2nd Report) Tomokatsu Aizawa (Tokyo Metropolitan College), Yoshitaka Sugiyama (Yazaki) EMD2016-15 CPM2016-22 OME2016-25 |
This paper describes a novel welding technique for overlapped copper foils of rigid and flexible printed circuit boards.... [more] |
EMD2016-15 CPM2016-22 OME2016-25 pp.39-42 |
ICD, MW |
2016-03-02 10:00 |
Hiroshima |
Hiroshima University |
A Study of Multilayer Printed Wiring Boards Using the Anisotropic Conductive Paste Hidenori Ishibashi (MELCO), Kenji Nagase (MEE), Tetsu Owada, Yoichi Kitamura, Naofumi Yoneda, Hiroaki Miyashita (MELCO) MW2015-173 ICD2015-96 |
In recent years, the resin multilayer wiring boards are used in the radio frequency circuits. They use through hole via ... [more] |
MW2015-173 ICD2015-96 pp.1-4 |
OPE, LQE, OCS |
2015-10-30 13:25 |
Oita |
Beppu International Convention Center |
Densely-aligned multilayered polymer optical waveguide with low interchannel crosstalk Yusuke Kogo, Kyuta Suzuki, Takaaki Ishigure (Keio Univ.) OCS2015-63 OPE2015-113 LQE2015-82 |
For the application to optical printed circuit boards, we developed the“Mosquito method,”as a fabrication technique for ... [more] |
OCS2015-63 OPE2015-113 LQE2015-82 pp.111-116 |
MW, OPE, EMT, MWP, EST, IEE-EMT [detail] |
2014-07-17 10:50 |
Hokkaido |
Muroran Inst. of Tech. |
Low-loss Light Coupling to/from Multimode Polymer Optical Waveguides via 45-degree Mirrors Yoshie Morimoto, Asami Takahashi, Takaaki Ishigure (Keio Univ.) MW2014-63 OPE2014-32 EST2014-24 MWP2014-21 |
On-board optical interconnects are drawing much attention: in particular, optical printed circuit boards (O-PCBs) on whi... [more] |
MW2014-63 OPE2014-32 EST2014-24 MWP2014-21 pp.87-92 |
EMCJ, WPT (Joint) |
2014-01-30 16:10 |
Saga |
Saga Univ. |
Crosstalk estimated in Analog-Digital Mixed Circuit Boards
-- The effect of ground slot -- Tomohiro Enda, Shinichi Sasaki, Shunsuke Baba (Saga Univ) EMCJ2013-119 |
In analog-digital mixed circuit boards ,power supply noises from the digital side to the analog side through GND layer i... [more] |
EMCJ2013-119 pp.45-49 |
EST, MWP, OPE, MW, EMT, IEE-EMT [detail] |
2013-07-18 14:30 |
Hokkaido |
Wakkanai Synthesis Cultural Center |
Structure Design of Polymer Optical Waveguide for High Bandwidth Density On-Board Interconnects Ryota Kinoshita, Takaaki Ishigure (Keio Univ.) MW2013-69 OPE2013-38 EST2013-33 MWP2013-28 |
Currently, for further advancement of high performance computers (HPCs), optical interconnects are anticipated as a key ... [more] |
MW2013-69 OPE2013-38 EST2013-33 MWP2013-28 pp.131-136 |
EMCJ |
2013-07-11 10:55 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Noise immunity design for multilayer printed circuit boards using fast electromagnetic simulation Mamoru Kamikura, Yuichiro Murata, Yudai Yoneoka (Mitsubishi Electric Corp.) EMCJ2013-29 |
We report on noise immunity design for multilayer printed circuit boards using fast electromagnetic simulation, and its ... [more] |
EMCJ2013-29 pp.11-14 |
EMD |
2013-05-17 13:35 |
Hokkaido |
Chitose Arcadia Plaza |
Magnetic Pulse Welding of Copper Foils on Rigid and Flexible Printed Circuit Boards Tomokatsu Aizawa (Tokyo Metropolitan College) EMD2013-1 |
This paper describes a novel welding technique for copper foils on rigid and flexible printed circuit boards and its exp... [more] |
EMD2013-1 pp.1-4 |
EMCJ |
2013-01-11 14:45 |
Nagasaki |
Nagasaki Univ. |
Reduction technique for power supply noise of Analog-Digital Mixed Circuit Boards
-- Adjustment of Attached Resistor Method -- Shunsuke Baba, Shinichi Sasaki, Hitoshi Takakura, Hiroaki Matsumoto (Saga Univ) EMCJ2012-119 |
In analog-digital mixed circuit boards , noises from the digital side to the analog side through GND power supply layer ... [more] |
EMCJ2012-119 pp.99-103 |
MWP, OPE, MW, EMT, EST, IEE-EMT [detail] |
2012-07-26 11:25 |
Hokkaido |
Hokkaido Univ. |
Crossed polymer optical waveguide for optical printed circuit board Keishiro Shitanda, Takaaki Ishigure (Keio Univ.) MW2012-39 OPE2012-32 EST2012-21 MWP2012-20 |
Currently, board-level optical interconnection is anticipated as a promising technology to realize high-performance comp... [more] |
MW2012-39 OPE2012-32 EST2012-21 MWP2012-20 pp.89-94 |
EMD |
2012-01-20 14:50 |
Kanagawa |
|
Non-Contact PIM Characteristic Evaluation of Printed Circuit Boards using the Standing Coaxial Tube Method Keita Hoshino, Daijiro Ishibashi, Kensuke Saito, Nobuhiro Kuga (Yokohama Nat'l Univ.) EMD2011-115 |
Using printed circuit boards (PCBs), this report discusses the sample shape condition suitable for Standing-Wave Coaxial... [more] |
EMD2011-115 pp.19-24 |
EMCJ, EMD |
2010-07-16 15:20 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Size Dependence of Return Ground Patterns on FM-Band Cross-Talks between Two Parallel Signal Traces on Printed Circuit Boards for Vehicles Michihira Iida, Tsuyoshi Maeno (DENSO Corp.), Osamu Fujiwara (Nagoya Inst. of Tech.) EMCJ2010-38 EMD2010-23 |
It is well known that electromagnetic disturbances in vehicle-mounted radios are mainly caused by conducted noise curren... [more] |
EMCJ2010-38 EMD2010-23 pp.37-42 |
EMCJ |
2010-01-22 09:30 |
Okinawa |
University of the Ryukyus |
Development of a Equivalent Circuit Model with Transmission Line Model for Designing Filter Formed on Printed Circuit Boards Keisuke Matsumoto, Yoshitaka Toyota, Kengo Iokibe, Ryuji Koga (Okayama Univ.) EMCJ2009-112 |
Slit pattern formed on return plane of printed circuit boards behaves like a passive element. A defected ground structur... [more] |
EMCJ2009-112 pp.81-86 |
SIP, CAS, VLD |
2009-07-02 13:30 |
Hokkaido |
Kushiko-shi Shogai Gakushu Center |
Octilinear Routing Method with Congestion Relaxation by Slant Lines Kyosuke Shinoda (Tokyo Tech), Yukihide Kohira (UoA), Atsushi Takahashi (Osaka Univ.) CAS2009-18 VLD2009-23 SIP2009-35 |
In recent Printed Circuit Boards (PCB), the design size and density are increased, and the improvement of routing tools ... [more] |
CAS2009-18 VLD2009-23 SIP2009-35 pp.97-102 |
EMCJ |
2009-04-24 13:30 |
Okayama |
|
Effect of Reducing Electromagnetic Noise between Power/Ground Planes with an EBG Pattern on Applying Noise Suppression Sheets Seiji Yano, Yoshitaka Toyota, Kengo Iokibe, Ryuji Koga (Okayama Univ.), Koichi Kondo, Shigeyoshi Yoshida (NEC TOKIN) EMCJ2009-2 |
Applying the electromagnetic bandgap (EBG) structure to power/ground planes of printed circuit boards (PCBs) helps preve... [more] |
EMCJ2009-2 pp.7-12 |
MW, EMCJ |
2008-10-23 14:55 |
Yamagata |
Yamagata Univ. |
Characteristics and their Mechanism of FM-Band Cross-Talks between Two Parallel Signal Traces on Printed Circuit Boards Tsuyoshi Maeno (DENSO), Hiroya Ueyama (Nagoya Institute of Technology), Michihira Iida (DENSO), Osamu Fujiwara (Nagoya Institute of Technology) EMCJ2008-62 MW2008-106 |
It is well known that electromagnetic disturbances in vehicle-mounted radios are mainly caused by conducted noise curren... [more] |
EMCJ2008-62 MW2008-106 pp.17-22 |
OPE, EMT, MW |
2008-07-24 15:15 |
Hokkaido |
|
Calcluation of Electromagnetic Radiation from PCB by Using Gaber Data and Netlist Hiroyuki Ishii, Hideki Kawaguchi (Muroran IT) MW2008-67 OPE2008-50 |
According to appearance of useful design software of printed circuit board (PCB) and commercial service of the printed c... [more] |
MW2008-67 OPE2008-50 pp.113-116 |
EMD |
2007-12-21 15:55 |
Tokyo |
Japan Aviation Electronics Industry,Limited |
Magnetic Pressure Welding of Copper Foils on Flexible Printed Circuit Boards (2nd Report) Tomokatsu Aizawa (Tokyo Metropolitan College), Kenichi Hanazaki (Yazaki Corporation), Keigo Okagawa (Tokyo Metropolitan College) EMD2007-106 |
This paper describes a new welding technique for copper foils on
flexible printed circuit boards and its experimental r... [more] |
EMD2007-106 pp.35-38 |