Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
LQE, OPE, CPM, EMD, R |
2023-08-25 14:15 |
Miyagi |
Tohoku university (Primary: On-site, Secondary: Online) |
Soldering Method of 10-Turn Flat Coil Plates for Magnetic Pulse Welding of Al/Cu Sheets Tomokatsu Aizawa (Metropolitan College of Technology) R2023-35 EMD2023-30 CPM2023-40 OPE2023-79 LQE2023-26 |
When overlapping Al/Cu sheets (0.5 mm thick) were fixed on a 10-turn flat coil and magnetic pulse welding was performed,... [more] |
R2023-35 EMD2023-30 CPM2023-40 OPE2023-79 LQE2023-26 pp.95-100 |
CS |
2023-07-27 11:06 |
Tokyo |
Hachijo-machi Chamber of Commerce and Industry |
Study of application of DDS to IoT DEP and performance evaluation Masaki Mitsuuchi, Tsunaki Ishikawa, Kazuhiro Kosaka, Tetsuya Yokotani, Koichi Ishibashi (KIT) CS2023-30 |
Internet of Things (IoT) services are currently being introduced in various fields. This has led to a marked increase in... [more] |
CS2023-30 pp.49-50 |
WPT |
2022-03-07 10:55 |
Kyoto |
(Primary: On-site, Secondary: Online) |
Influence Evaluation of Element Elimination in phased arrays of Flat-top Beam for Microwave Power Transmission System for Micro-drone Nobuyuki Takabayashi, Naoki Shinohara, Tomohiko Mitani (Kyoto Univ.) WPT2021-21 |
Nowadays, drones have been attracting a lot of attention from industries. Short battery lifetime has been a major proble... [more] |
WPT2021-21 pp.10-12 |
R, EMD |
2022-02-10 15:10 |
Online |
Online |
Magnetic Pulse Welding of Al/Cu Sheets Using 10-Turn Flat Coil Tomokatsu Aizawa (Tokyo Metropolitan College) R2021-44 EMD2021-12 |
This magnetic pulse welding can electrically connect Al sheet and Cu sheet at low temperature with high quality. Welding... [more] |
R2021-44 EMD2021-12 pp.6-11 |
EMCJ, EMD, WPT (Joint) |
2021-07-02 13:55 |
Online |
Online |
Comparison of discharge circuits for magnetic pulse welding using 1, 5 and 10 turn flat coils Aizawa Tomokatsu (Tokyo Metropolitan College) EMD2021-1 |
The discharge circuits for magnetic pulse welding of sheet metals using 1, 5 and 10 turn flat coils will have tens of ti... [more] |
EMD2021-1 pp.1-6 |
EMCJ, EMD, WPT (Joint) [detail] |
2020-07-03 15:00 |
Online |
Online |
High-speed mechanical crowbar switch used in discharge circuit for magnetic pulse welding of sheet metals
-- Withstand voltage about 6kV, operation time about 8μs -- Tomokatsu Aizawa, Kazuo Matsuzawa, Yuki Akedo (Tokyo Metropolitan College) EMD2020-1 |
This high-speed mechanical switch consists of two sets of small Al contact sheets (2 pieces). The withstand voltage of t... [more] |
EMD2020-1 pp.1-6 |
EMD |
2020-01-17 14:05 |
Kanagawa |
Rental hall Shonan Hiratsuka |
Magnetic pulse welding of Al/Cu sheets using 8-turn flat coil (2nd Report)
-- Coil plate deformation after experiments -- Tomokatsu Aizawa (Tokyo Metropolitan College) EMD2019-48 |
This magnetic pulse welding was performed by charging two sets of the same capacitor in parallel, discharging them in se... [more] |
EMD2019-48 pp.1-6 |
VLD, DC, CPSY, RECONF, ICD, IE, IPSJ-SLDM, IPSJ-EMB, IPSJ-ARC (Joint) [detail] |
2019-11-15 16:10 |
Ehime |
Ehime Prefecture Gender Equality Center |
A 16 Gb/s Differential Transmitter With Far-End Crosstalk Cancellation Using Injection Timing Control Daigo Takahashi (The Univ. of Tokyo), Yusuke Fujita, Satoshi Miura (THine Electronics), Tetsuya Iizuka (The Univ. of Tokyo) ICD2019-42 IE2019-48 |
This paper proposes a far-end crosstalk cancellation (FEXT) method with adjustable injection timing of the crosstalk can... [more] |
ICD2019-42 IE2019-48 pp.65-70 |
EMD |
2018-11-09 15:30 |
Tokyo |
The University of Electro-Communications |
Equivalent Combinations of Discharge Capacitor Bank and Multi-Turn Coil in Magnetic Pulse Welding of Al/Cu Sheets Tomokatsu Aizawa (Tokyo Metropolitan College) EMD2018-45 |
Magnetic pulse welding of overlapped Al/Cu sheets is performed by flowing a discharge current from a capacitor bank to a... [more] |
EMD2018-45 pp.27-32 |
EMD |
2018-10-05 14:30 |
Tokyo |
Fuji Electric (TOKYO: Osaki East Tower 23F) |
Comparison of magnetic pulse welding method of Al/Cu sheets using 4, 8 and 16-turn flat coils Tomokatsu Aizawa (Tokyo Metropolitan College) EMD2018-38 |
Magnetic pulse welding of sheets is performed by flowing a large discharge current rapidly from a capacitor bank to a fl... [more] |
EMD2018-38 pp.7-12 |
EMD |
2018-06-15 14:00 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Magnetic pulse welding of Al/Cu sheets using 8-turn flat coil Tomokatsu Aizawa (Tokyo Metropolitan College) EMD2018-9 |
Magnetic pulse welding (or electromagnetic pulse welding) of sheets is done by flowing a large discharge current rapidly... [more] |
EMD2018-9 pp.7-12 |
COMP, IPSJ-AL |
2018-05-26 13:30 |
Aichi |
Nagoya Institute of Technology |
Strip flat folding with parallel oblique mountain-valley-assigned creases Hiro Ito (UEC), Chie Nara (Meiji Univ.), Izumi Shirahama (ECBEING), Mizuho Tomura (UEC) COMP2018-4 |
The flat foldability problem is a typical problem of origami mathematics, which asks whether or not a given paper with c... [more] |
COMP2018-4 pp.63-70 |
EMD |
2017-11-17 10:30 |
Tokyo |
The University of Electro-Communications |
A Method for Evaluating Degradation Phenomenon of Electrical Contacts using a Micro-Sliding Mechanism
-- Minimal Sliding Amplitudes against Input Waveforms (3) -- Shin-ichi Wada, Keiji Koshida (TMC), Koichiro Sawa (Nippon Inst. of Tech.) EMD2017-44 |
The authors obtaine experimental results on the minimal sliding amplitude (MSA) required to make resistances fluctuate o... [more] |
EMD2017-44 pp.7-12 |
IT, SIP, RCS |
2017-01-20 10:25 |
Osaka |
Osaka City Univ. |
Band-pass Maximally Flat FIR Fractional Order Differentiators with Stopband Based on Minimization of $L_p$ Norm Ryosuke Kunii, Takashi Yoshida, Naoyuki Aikawa (TUS) IT2016-92 SIP2016-130 RCS2016-282 |
In this paper, we propose a design method for a band-pass maximally flat FIR fractional order differentiators (FODs) wit... [more] |
IT2016-92 SIP2016-130 RCS2016-282 pp.267-271 |
AP (2nd) |
2015-12-18 10:05 |
Okinawa |
Miyako Island Marine Terminal |
Radar Cross Section Characteristics of Flat Layer Radar Absorbent Material Yuka Ishii, Naobumi Michishita, Hisashi Morishita (NDA), Kei Samejima (NEC) |
Recently, the scattering phenomena with RAM have been studied by both measurement and theoretical calculation. We measur... [more] |
|
SDM |
2015-10-29 16:00 |
Miyagi |
Niche, Tohoku Univ. |
Electrical Properties of MOSFETs Introducing Atomically Flat Gate Insulator/Silicon Interface Tetsuya Goto, Rihito Kuroda, Tomoyuki Suwa, Akinobu Teramoto, Toshiki Obara, Daiki Kimoto, Shigetoshi Sugawa (Tohoku Univ.), Yutaka Kamata, Yuki Kumagai, Katsuhiko Shibusawa (LAPIS Semi. Miyagi) SDM2015-74 |
Atomically flattening technology was introduced to the widely-used complementary metal oxide silicon (CMOS) process empl... [more] |
SDM2015-74 pp.17-22 |
MBE |
2012-01-27 16:20 |
Fukuoka |
Kyushu University |
Effect of pre-filter application for detection of Legionella pneumophila using gene identification method with the metal coated flat sheet membrane Tomohiro Kitajima, Toshitsugu Sugawara, Junji Arisawa, Kazuyuki Kimura (HIT), Osamu Igarashi (NIX,INC,) MBE2011-90 |
Plate culture increased a patient of Legionnaires' disease because it needed to detect Legionella species in hot spring ... [more] |
MBE2011-90 pp.59-64 |
OPE, MW, MWP, EMT, EST, IEE-EMT [detail] |
2011-07-22 16:05 |
Hokkaido |
|
Picosecond pulse generation in the 1μm region by using optical comb generator Ryuji Nishi (Aoyama Gakuin Univ.), Isao Morohashi, Naokatsu Yamamoto, Takahide Sakamoto, Atsushi Kanno, Tetsuya Kawanishi, Norihiko Sekine, Iwao Hosako (NICT), Hideyuki Sotobayashi (Aoyama Gakuin Univ.) MW2011-67 OPE2011-54 EST2011-53 MWP2011-35 |
Purpose of this experiment is generating picosecond pulse in the 1 micro-meter region where expected as a new wave lengt... [more] |
MW2011-67 OPE2011-54 EST2011-53 MWP2011-35 pp.163-166 |
ED, SDM |
2010-07-02 12:15 |
Tokyo |
Tokyo Inst. of Tech. Ookayama Campus |
High Integrity Gate Insulator Films on Atomically Flat Silicon Surface Xiang Li, Rihito Kuroda, Tomoyuki Suwa, Akinobu Teramoto, Shigetoshi Sugawa, Tadahiro Ohmi (Tohoku Univ.) ED2010-93 SDM2010-94 |
A low temperature atomically flattening technology for Si(100) wafer is developed. By annealing in ultra pure argon ambi... [more] |
ED2010-93 SDM2010-94 pp.183-188 |
RCS, IN (Joint) |
2009-05-22 16:40 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Inflated Lattice Precoding to Improve Error Rate Performance in Turbo Coded Downlink MU-MIMO Systems Hiroshi Nakano, Kozue Hirata, Takashi Onodera, Kazunari Yokomakura, Minoru Kubota (Sharp Co.) RCS2009-26 |
This paper presents improved transmission performance of inflated lattice precoding (ILP) compared to Tomlinson Harashim... [more] |
RCS2009-26 pp.151-156 |