Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
MW, ED |
2007-01-18 13:25 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
* Futoshi Kuroki, Kazuya Miyamoto (Kure Nat'l Coll of Tech) |
Although a dielectric-supported tri-plate transmission line is usually used at centimeter frequencies, undesired radiati... [more] |
ED2006-218 MW2006-171 pp.99-103 |
EMCJ |
2006-12-15 10:30 |
Aichi |
Nagoya Institute of Technology |
EMI Model improvement taking LSI package structure into consideration Takahiro Tsuda, Takanori Uno, Kouji Ichikawa (DENSO) EMCJ2006-84 |
An LSI EMI model was used to analyze conducted emission noise in a PCB. This model has been problem that the accuracy o... [more] |
EMCJ2006-84 pp.19-24 |
EMD |
2006-11-17 15:30 |
Kanagawa |
Fujitsu |
Magnetic Pressure Welding of Copper Foils on Flexible Printed Circuit Boards Tomokatsu Aizawa (College of Industrial Tech.), Kenichi Hanazaki (Yazaki Corporation), Keigo Okagawa (College of Industrial Tech.) |
This paper describes a new welding technique for copper foils on flexible printed circuit boards and its experimental re... [more] |
EMD2006-57 pp.17-20 |
EMCJ, MW |
2006-10-26 10:30 |
Aomori |
Hachinohe Institute of Technology |
Moments Analysis of EM Noise caused by Power/Ground Noise of Electric Unit Yasuhiro Shiraki, Yasuhiro Yamanaka, Norio Abe (Mitsubishi Elec.) EMCJ2006-53 MW2006-109 |
In this paper, EM radiation(EMI) due to power and ground fluctuation of electric unit at FM band were investigated usin... [more] |
EMCJ2006-53 MW2006-109 pp.13-18 |
MW |
2006-09-05 14:15 |
Tokyo |
|
Consideration on Undesired Radiation in Dielectric-Supported Tri-plate Line Filter Kazuya Miyamoto, Futoshi Kuroki (Kure National College of Techn.) |
A dielectric-supported tri-plate transmission line is used at a centimeter wave band. Undesired radiation occurs for a c... [more] |
MW2006-93 pp.103-106 |
EMCJ, EMD |
2006-07-28 13:25 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Simulation of Electromagnetic Emissions from LSIs on Printed Circuit Boards Fumikazu Ga, Takeshi Watanabe, Yuuichi Iizuka (NEC Electronics Co.) EMCJ2006-40 EMD2006-20 |
A practical technique of PCB-level EMI simulation has been developed. In this report, analyzed results of high-frequency... [more] |
EMCJ2006-40 EMD2006-20 pp.25-28 |
EMCJ |
2006-01-16 15:45 |
Fukuoka |
Kyushu University |
Investigation on Radiated Emission Suppression Effect of Differential Transmission Mode from Printed Circuit Boards in Frequency Range of 0.5 GHz to 6 GHz Ryota Mitote, Toshiro Nishimura, Nobuo Kuwabara (K.I.T), Masato Kawabata (Fukuoka Industrial Technology Center) |
Emission suppression technology according with printed circuit board (PCB) is effective to reduce unwanted emission from... [more] |
EMCJ2005-134 pp.41-46 |
EMCJ, MW |
2005-10-28 10:45 |
Akita |
Akita University |
Asymmetry of printed pattern wires in differential mode excitation and common-mode current Yoshio Kami (Univ. of Electro-Commun.) |
In printed circuit boards, a two-trace line is gradually used for reducing radiated emissions. Since such a transmission... [more] |
EMCJ2005-96 MW2005-102 pp.19-24 |
EMCJ |
2005-09-08 16:45 |
Kyoto |
Kyoto University |
An Investigation of the Radiated Emission affected due to the arrangement of a high speed routing and Power/Ground planes in PCBs Noboru Iizawa, Katsuya Yamamoto, Futoshi Nishimura (Matsushita Electric Works, Ltd), Kohji Sasabe (Matsushita Electric Works, Ltd, VCCI) |
An effect on radiated emission due to the mutual position between power-ground planes and a high speed signal wiring on ... [more] |
EMCJ2005-64 pp.31-36 |
EMCJ, EMD |
2005-07-28 15:10 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
A Method to Estimate the Radiated Emission Utilizing Common-mode Potential Distribution in a Printed Circuit Board Youhei Sakai, Ryuji Koga (Okayama Univ.), Tetsushi Watanabe (ITCO), Osami Wada (Kyoto Univ.) |
In this report, we propose a method to estimate the common-mode radiation from a printed circuit board (PCB) with a high... [more] |
EMCJ2005-49 EMD2005-28 pp.45-50 |
EMCJ |
2005-05-26 11:55 |
Hyogo |
Awaji Yumebutai International Conference Center |
A Fast Calculation Method of Common-mode Radiation from a Printed Circuit Board with an Equivalent Antenna Based on Imbalance Difference Model Tetsushi Watanabe (ITCO), Youhei Sakai (Okayama Univ.), Osami Wada (Kyoto Univ.), Ryuji Koga (Okayama Univ.) |
A printed circuit board having a microstrip line with a partially narrow ground plane makes a large common-mode radiatio... [more] |
EMCJ2005-16 pp.35-40 |
RCS, AP, WBS, MW, MoNA |
2005-03-02 10:20 |
Kanagawa |
Yokosuka Research Park |
- Shinya Watanabe, Masanori Kinpara (Aoyama Gakuin Univ.), Koji Wada (UEC), Osamu Hashimoto (Aoyama Gakuin Univ.) |
In this paper, we examine tunable characteristics of a center frequency and transmission zeros of bandpass filters (BPFs... [more] |
WBS2004-81 AP2004-262 RCS2004-349 MoMuC2004-132 MW2004-259 pp.147-152 |
EMCJ |
2005-01-21 16:05 |
Okinawa |
NiCT Okinawa Subtropical Environment Remote Sensing Center |
EMI Reduction Method of PCB's Connector Mitsuhiko Kanda, Naoto Oka (Mitsubishi Electric) |
A sub board is mounted on the main printed circuit board (PCB), in order to connect an interface cable. In this paper, r... [more] |
EMCJ2004-145 pp.85-88 |
EMCJ |
2004-10-01 11:20 |
Nara |
|
Shielded via structures for high-speed printed circuit boards Taras Kushta, Kaoru Narita (NEC) |
Shielded via structures formed by signal and ground vias jointly are an important type of vertical transitions providing... [more] |
EMCJ2004-60 pp.29-34 |