| IEICE Technical Committee Submission System Conference Schedule |
Online Proceedings [Sign in] Tech. Rep. Archives |
All Technical Committee Conferences (Searched in: All Years)
| Committee | Date Time | Place | Paper Title / Authors | Abstract | Paper # | |
| EMD | 2010-03-05 15:40 |
Kanagawa | Yokohama National University | Radiated Emission from Stripline Structure with Periodically Slots in Power Plane Tsukasa Takayama, Yoshiki Kayano, Hiroshi Inoue (Akita Univ.)  EMD2009-137 |
In circuit design, the stripline structure which has three layers, with a signal trace in the middle layer and the upper... [more] | EMD2009-137 pp.41-44 |
| EMCJ | 2010-01-22 09:30 |
Okinawa | University of the Ryukyus | Development of a Equivalent Circuit Model with Transmission Line Model for Designing Filter Formed on Printed Circuit Boards Keisuke Matsumoto, Yoshitaka Toyota, Kengo Iokibe, Ryuji Koga (Okayama Univ.) EMCJ2009-112 |
Slit pattern formed on return plane of printed circuit boards behaves like a passive element. A defected ground structur... [more] | EMCJ2009-112 pp.81-86 |
| VLD, DC, IPSJ-SLDM, CPSY, RECONF, ICD, CPM (Joint) [detail] |
2009-12-03 10:40 |
Kochi | Kochi City Culture-Plaza | Evaluation of Waveform-Improvement performance on the Segmental Transmission Line Yuki Shimauchi, Hiroshi Nakayama, Yoshiki Yamaguchi, Noriyuki Aibe (Tsukuba Univ.), Ikuo Yoshihara (Miyazaki Univ.), Moritoshi Yasunaga (Tsukuba Univ.) CPM2009-145 ICD2009-74 |
As processor-speed increases, high-speed signal-propagation in the PCB traces following the processor-speed is also requ... [more] | CPM2009-145 ICD2009-74 pp.63-68 |
| VLD, DC, IPSJ-SLDM, CPSY, RECONF, ICD, CPM (Joint) [detail] |
2009-12-03 11:00 |
Kochi | Kochi City Culture-Plaza | [Invited Talk]
Study on the Signal Integrity Design of a High-Speed LSI and a Printed Circuit Board Seiichi Saito, Keitaro Yamagishi (Mitsubishi Electric) CPM2009-146 ICD2009-75 |
This paper describes the signal integrity design focusing on the signal reflection which should be considered in design ... [more] | CPM2009-146 ICD2009-75 pp.69-74 |
| VLD | 2009-09-24 14:20 |
Osaka | Osaka University | A Wall Generation for Trunk Routing of Multiple Nets on Single Layer Yukihide Kohira (Univ. of Aizu.), Atsushi Takahashi (Osaka Univ.) VLD2009-31 |
In this paper, we propose a wall generation for trunk routing of multiple nets on single layer. An existing routing meth... [more] | VLD2009-31 pp.13-18 |
| SIP, CAS, VLD | 2009-07-02 13:30 |
Hokkaido | Kushiko-shi Shogai Gakushu Center | Octilinear Routing Method with Congestion Relaxation by Slant Lines Kyosuke Shinoda (Tokyo Tech), Yukihide Kohira (UoA), Atsushi Takahashi (Osaka Univ.) CAS2009-18 VLD2009-23 SIP2009-35 |
In recent Printed Circuit Boards (PCB), the design size and density are increased, and the improvement of routing tools ... [more] | CAS2009-18 VLD2009-23 SIP2009-35 pp.97-102 |
| EMCJ | 2009-06-05 09:40 |
Tokyo | Tokyo Big Sight (Tokyo International Exihibition Center) | Evaluation of transmission characteristic on relative humidity for flexible printed circuit board in microwave band Akihisa Tsuchiya, Hideaki Sugama, Masami Sakurai, Naomi Hidaka (Kanagawa Ind. Tech Center), Osamu Hashimoto (Aoyama Gakuin Univ.) EMCJ2009-22 |
We evaluated transmission characteristics of microstrip line and coupled microstrip line fabricated with PI films in rel... [more] | EMCJ2009-22 pp.1-5 |
| EMCJ | 2009-04-24 13:30 |
Okayama | Effect of Reducing Electromagnetic Noise between Power/Ground Planes with an EBG Pattern on Applying Noise Suppression Sheets Seiji Yano, Yoshitaka Toyota, Kengo Iokibe, Ryuji Koga (Okayama Univ.), Koichi Kondo, Shigeyoshi Yoshida (NEC TOKIN) EMCJ2009-2 |
Applying the electromagnetic bandgap (EBG) structure to power/ground planes of printed circuit boards (PCBs) helps preve... [more] | EMCJ2009-2 pp.7-12 |
|
| VLD, DC, IPSJ-SLDM, CPSY, RECONF, ICD, CPM (Joint) [detail] |
2008-11-17 14:55 |
Fukuoka | Kitakyushu Science and Research Park | CAFE router: A Fast Connectivity Aware Multi-net Routing Algorithm for Routing Grid with Obstacles Yukihide Kohira, Atsushi Takahashi (Tokyo Tech) VLD2008-72 DC2008-40 |
Due to the increase of operation frequency in recent LSI systems, signal propagation delays are required to achieve spec... [more] | VLD2008-72 DC2008-40 pp.73-78 |
| MW, EMCJ | 2008-10-23 14:55 |
Yamagata | Yamagata Univ. | Characteristics and their Mechanism of FM-Band Cross-Talks between Two Parallel Signal Traces on Printed Circuit Boards Tsuyoshi Maeno (DENSO), Hiroya Ueyama (Nagoya Institute of Technology), Michihira Iida (DENSO), Osamu Fujiwara (Nagoya Institute of Technology) EMCJ2008-62 MW2008-106 |
It is well known that electromagnetic disturbances in vehicle-mounted radios are mainly caused by conducted noise curren... [more] | EMCJ2008-62 MW2008-106 pp.17-22 |
| OPE, EMT, MW | 2008-07-24 15:15 |
Hokkaido | Calcluation of Electromagnetic Radiation from PCB by Using Gaber Data and Netlist Hiroyuki Ishii, Hideki Kawaguchi (Muroran IT) MW2008-67 OPE2008-50 |
According to appearance of useful design software of printed circuit board (PCB) and commercial service of the printed c... [more] | MW2008-67 OPE2008-50 pp.113-116 |
|
| EMCJ | 2008-07-17 13:15 |
Tokyo | Kikai-Shinko-Kaikan Bldg | Estimation of Electromagnetic Emission from PCBs with a Connector through the Common-mode Antenna Model (part2)
-- Model Improvement by Considering Connector Inductance -- Yuri Wakaduki, Makoto Torigoe (Okayama Univ.), Tetsushi Watanabe (ITCO), Yoshitaka Toyota, Kengo Iokibe, Ryuji Koga (Okayama Univ.) EMCJ2008-32 |
In this paper, we apply a connector model with an inductance to the common-mode antenna model. The common-mode antenna m... [more] | EMCJ2008-32 pp.37-42 |
| EMD | 2008-01-25 14:50 |
Tokyo | Kikai-Shinko-Kaikan Bldg. | Non-contact intermodulation measurement for a resonant DUT in a standing wave coaxial tube Hirotoshi Ogura, Nobuhiro Kuga (Yokohama National Univ.) EMD2007-112 |
A non-contact measurement method for PIM evaluation is proposed in this paper. This method employs a standing wave coaxi... [more] | EMD2007-112 pp.17-22 |
| CPM, ICD | 2008-01-18 13:25 |
Tokyo | Kikai-Shinko-Kaikan Bldg | An Extraction Method of Material Constants by Transmission Line Measurements Hiroshi Toyao, Yoshiaki Wakabayashi (NEC) CPM2007-142 ICD2007-153 |
The material constants of dielectric materials such as solder resist have a large influence on the accuracy of the elect... [more] | CPM2007-142 ICD2007-153 pp.83-86 |
| EMD | 2007-12-21 15:55 |
Tokyo | Japan Aviation Electronics Industry,Limited | Magnetic Pressure Welding of Copper Foils on Flexible Printed Circuit Boards (2nd Report) Tomokatsu Aizawa (Tokyo Metropolitan College), Kenichi Hanazaki (Yazaki Corporation), Keigo Okagawa (Tokyo Metropolitan College) EMD2007-106 |
This paper describes a new welding technique for copper foils on flexible printed circuit boards and its experimental r... [more] |
EMD2007-106 pp.35-38 |
| EMD | 2007-11-15 10:25 |
Shizuoka | Actcity Hamamatsu | Contact Resistance Characteristics of Complex Structure Contacts for Contaminated Printed Circuit Board in SO2 Environment Terutaka Tamai, Yasushi Saitoh (Mie Univ.), Yasuhiro Hattori (AutoNetwork Technologies) EMD2007-87 |
Characteristics of conductive elastomer which is composed of silicone rubber and dispersed carbon black particles shows ... [more] | EMD2007-87 pp.109-114 |
| EMCJ | 2007-09-21 11:25 |
Kyoto | Doshisha University | Balance Control of Power-supply Interconnection in Printed Circuit Boards and ICs for Reduction of Common-mode Current Flowing on Attached Cables Kenta Mizui, Osami Wada, Umberto Paoletti, Takashi Hisakado (Kyoto Univ.) EMCJ2007-45 |
In this report, the balance control of a simple circuit consisting of a PCB with an IC having one power-supply line and ... [more] | EMCJ2007-45 pp.13-18 |
| EMCJ | 2007-06-22 13:25 |
Tokyo | Kikai-Shinko-Kaikan Bldg | Estimation of Radiated Emissions with Common-mode Antenna Model of Printed Circuit Board
-- Superposition of Common-mode Excitation Sources -- Keisuke Fukumasu (Okayama Univ.), Tetsushi Watanabe (ITCO), Yoshitaka Toyota, Kengo Iokibe, Ryuji Koga (Okayama Univ.), Osami Wada (Kyoto Univ.) EMCJ2007-25 |
A common-mode antenna model proposed by the authors is able to predict common-mode radiation from printed circuit boards... [more] | EMCJ2007-25 pp.39-44 |
| NLP | 2007-06-09 09:00 |
Hiroshima | Synchronization Phenomena of Colpitts Oscillators using Printed Spiral Inductors Coupled by Mutual Inductance Masafumi Nukushina, Takashi Kunihiro, Tatsuya Nankou, Masayuki Yamauchi (Hiroshima I.T.), Mamoru Tanaka (Sophia Univ) NLP2007-23 |
Recently, Spiral inductor or Spiral Antenna are usually used for IC, RFID and so on. We made a printed spiral inductor ... [more] |
NLP2007-23 pp.1-6 |
|
| EMD | 2007-05-18 15:50 |
Miyagi | Ishinomaki Senshu University | * Hiromichi Kubota, Masanari Taniguchi, Shosuke Suzuki, Tasuku Takagi (Tohoku Bunka Gakuen University) EMD2007-11 |
Due to a trend of miniaturization and diversification of electronic instruments and information facilities, the printed ... [more] | EMD2007-11 pp.21-24 |
[Return to Top Page]