Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
CAS |
2013-01-29 15:55 |
Oita |
Beppu International Convention Center |
Pin prove position optimization through genetic algorithm in printed circuit board electrical inspections Masashi Morisawa, Hideki Katagiri (Hiroshima Univ.), Hiroshi Hamori (OHT), Kosuke Kato (Hiroshima Institute Tech) CAS2012-90 |
Pin probe inspection methods have been widely used in printed circuit board electrical inspection. In conventional metho... [more] |
CAS2012-90 pp.133-136 |
EMD |
2013-01-25 13:35 |
Kanagawa |
Hitachi, Ltd., (Totsuka, Yokohama) |
[Invited Talk]
The latest trend of PCB pattern design technique for LSI stable operation, suppressing noise and high speed serial interface Akihiro Tanaka, Hiroyuki Motoki, Hideyuki Nakanishi (Aica Kogyo) EMD2012-97 |
A design method for power distribution network of printed circuit board (PCB) adopting the parameters of input impedance... [more] |
EMD2012-97 p.1 |
EMCJ |
2013-01-11 14:45 |
Nagasaki |
Nagasaki Univ. |
Reduction technique for power supply noise of Analog-Digital Mixed Circuit Boards
-- Adjustment of Attached Resistor Method -- Shunsuke Baba, Shinichi Sasaki, Hitoshi Takakura, Hiroaki Matsumoto (Saga Univ) EMCJ2012-119 |
In analog-digital mixed circuit boards , noises from the digital side to the analog side through GND power supply layer ... [more] |
EMCJ2012-119 pp.99-103 |
EMD |
2012-12-21 13:45 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
[Special Talk]
Fundamental Experiments for Magnetic Pulse Welding of Electric and Electronic Parts Tomokatsu Aizawa (Tokyo Metropolitan College) EMD2012-92 |
Copper and aluminum materials such as a sheet, foil, a terminal board, a wire are connected by magnetic pulse welding (M... [more] |
EMD2012-92 pp.7-12 |
OPE, LQE, OCS |
2012-10-26 17:00 |
Miyazaki |
|
Fabrication of Graded-Index Polymer Optical Waveguide Using a Micro-Dispenser and its Characterization for High-Density optical Wiring Kazutomo Soma, Takaaki Ishigure (Keio Univ.) OCS2012-75 OPE2012-126 LQE2012-92 |
As an innovative fabrication method of multimode polymer parallel optical waveguides (PPOWs) with graded-index (GI) circ... [more] |
OCS2012-75 OPE2012-126 LQE2012-92 pp.177-182 |
MWP, OPE, MW, EMT, EST, IEE-EMT [detail] |
2012-07-26 11:25 |
Hokkaido |
Hokkaido Univ. |
Crossed polymer optical waveguide for optical printed circuit board Keishiro Shitanda, Takaaki Ishigure (Keio Univ.) MW2012-39 OPE2012-32 EST2012-21 MWP2012-20 |
Currently, board-level optical interconnection is anticipated as a promising technology to realize high-performance comp... [more] |
MW2012-39 OPE2012-32 EST2012-21 MWP2012-20 pp.89-94 |
EMCJ |
2012-07-19 13:55 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Equivalent Circuit Models of Capacitance and Inductance at Resonance Based on Electric and Magnetic Energy Taiki Nishimoto, Rikiya Asai, Tohlu Matsushima, Takashi Hisakado, Osami Wada (Kyoto Univ.) EMCJ2012-34 |
In high-frequency circuits, conductive planes are preferably used to stabilize electric potential. However, their large ... [more] |
EMCJ2012-34 pp.13-18 |
EMCJ, IEE-EMC |
2012-06-22 14:35 |
Osaka |
Osaka Univ. |
Control of ESD Flashover Direction on Printed-wiring Board by Back Electrode Jun Inami, Katsuji Hirabayashi (FUJITSU TEN), Kotaro Tsuboi, Sho Iwai, Shinya Ohtsuka (KIT) EMCJ2012-28 |
When the intrusion ESD in electronic Discharge, cause malfunction of the product or destruction of the semiconductor dev... [more] |
EMCJ2012-28 pp.45-47 |
EMCJ |
2012-01-27 15:30 |
Fukuoka |
Kyushu Univ. |
Examination of reduction technique for radiation noise from mesh pattern power supply layers in PCB Hiroaki Matsumoto, Shinichi Sasaki, Hitoshi Takakura (Saga Univ) EMCJ2011-127 |
This paper describes the reduction technique of radiation noise from power supply layer in PCB. We advance examination ... [more] |
EMCJ2011-127 pp.93-98 |
VLD, CPSY, RECONF, IPSJ-SLDM [detail] |
2012-01-25 15:20 |
Kanagawa |
Hiyoshi Campus, Keio University |
A Proposal of Signal Integrity Improvement Method Using Impedance-reconfiguration Technique Moritoshi Yasunaga, Hiroki Shimada, Shohei Akita, Takuya Adachi, Hidetoshi Ishijima, Yusuke Kuribara (Univ. of Tsukuba) VLD2011-100 CPSY2011-63 RECONF2011-59 |
New techniques are strongly desired for signal integrity improvement on PCB traces in GHz-era because conventional imped... [more] |
VLD2011-100 CPSY2011-63 RECONF2011-59 pp.55-60 |
EMD |
2012-01-20 14:50 |
Kanagawa |
|
Non-Contact PIM Characteristic Evaluation of Printed Circuit Boards using the Standing Coaxial Tube Method Keita Hoshino, Daijiro Ishibashi, Kensuke Saito, Nobuhiro Kuga (Yokohama Nat'l Univ.) EMD2011-115 |
Using printed circuit boards (PCBs), this report discusses the sample shape condition suitable for Standing-Wave Coaxial... [more] |
EMD2011-115 pp.19-24 |
VLD, DC, IPSJ-SLDM, CPSY, RECONF, ICD, CPM (Joint) [detail] |
2011-11-28 14:40 |
Miyazaki |
NewWelCity Miyazaki |
Waveform-Improvement of High-speed Signals on Branch Traces on PCBs Yusuke Kuribara, Shohei Akita, Hiroki Shimada, Takuya Adachi, Hidetoshi Ishijima (Univ. Tsukuba), Ikuo Yoshihara (Univ. Miyazaki), Moritoshi Yasunaga (Univ. Tsukuba) CPM2011-152 ICD2011-84 |
Recently, it is a serious problem that the signal integrity of high-speed signals transmitting on PCB traces deteriorate... [more] |
CPM2011-152 ICD2011-84 pp.19-24 |
EMD |
2011-01-28 15:15 |
Tokyo |
Japan Aviation Electronics Industry,Limited |
Effects of resin-clay nanocomposites on the ionic migration inhibitors in Ag-printed circuits Yasuyuki Ohtani, Shin-ichiro Nakajima (JAE) EMD2010-140 |
Most of electronic products has been progressed in downsizing with the packaging of the printed circuit board which has ... [more] |
EMD2010-140 pp.29-34 |
EMCJ |
2011-01-28 12:45 |
Kumamoto |
Kumamoto National College of Technology |
Capacitor addition system for the reduction of far-end crosstalk Kazuaki Terashima, Shinichi Sasaki (Saga Univ) EMCJ2010-108 |
Crosstalk reduction in wiring of a high-density wiring board and also LSI was one of the important problem.In this labor... [more] |
EMCJ2010-108 pp.49-53 |
EMCJ |
2011-01-28 13:05 |
Kumamoto |
Kumamoto National College of Technology |
A Consideration of Trace Wiring for Signal Integrity Yasuhiro Okawa, Fengchao Xiao, Yoshio Kami (UEC) EMCJ2010-109 |
Trace wiring in a printed circuit board (PCB) has been required to design in high density. As one of problems for such w... [more] |
EMCJ2010-109 pp.55-59 |
VLD, DC, IPSJ-SLDM, CPSY, RECONF, ICD, CPM (Joint) [detail] |
2010-11-29 11:40 |
Fukuoka |
Kyushu University |
Evaluation of Signal-Integrity Improvement Capability of the Segmental Transmission Line
-- In Its Application to Lines Including Inductances -- Hiroki Shimada, Shohei Akita, Masami Ishiguro, Moritoshi Yasunaga, Noriyuki Aibe (Univ. of Tsukuba), Ikuo Yoshihara (Univ. of Miyazaki) CPM2010-127 ICD2010-86 |
In recent years, signal integrity(SI) is becoming very serious problem in the area of transmitting high-frequency-digita... [more] |
CPM2010-127 ICD2010-86 pp.19-24 |
MW, EMCJ |
2010-10-21 15:05 |
Akita |
Akita Univ. |
An Equivalent Circuit Model for Predicting EM Radiation from Stripline Structure with a Thin Wire Yoshiki Kayano, Hiroshi Inoue (Akita Univ.) EMCJ2010-56 MW2010-91 |
In recent years, effective methods for predicting and suppressing EMI over a broad band are required. In this paper, we ... [more] |
EMCJ2010-56 MW2010-91 pp.25-30 |
EMD, OPE, LQE, CPM |
2010-08-27 12:05 |
Hokkaido |
Chitose Arcadia Plaza |
Compact 40-Gb/s Driver IC integrated EML Module Using Broadband FPC Connection Technique Takatoshi Yagisawa, Tadashi Ikeuchi (FUJITSU/Optoelectronic Ind and Tech Development Association) EMD2010-50 CPM2010-66 OPE2010-75 LQE2010-48 |
The requirement for reducing the size and cost of 40-Gbit/s optical components has been strong. One of the most promisin... [more] |
EMD2010-50 CPM2010-66 OPE2010-75 LQE2010-48 pp.115-118 |
EMCJ, EMD |
2010-07-16 15:20 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Size Dependence of Return Ground Patterns on FM-Band Cross-Talks between Two Parallel Signal Traces on Printed Circuit Boards for Vehicles Michihira Iida, Tsuyoshi Maeno (DENSO Corp.), Osamu Fujiwara (Nagoya Inst. of Tech.) EMCJ2010-38 EMD2010-23 |
It is well known that electromagnetic disturbances in vehicle-mounted radios are mainly caused by conducted noise curren... [more] |
EMCJ2010-38 EMD2010-23 pp.37-42 |
VLD, IPSJ-SLDM |
2010-05-20 13:55 |
Fukuoka |
Kitakyushu International Conference Center |
An Efficient Congested Area Specification And Congestion Relaxation by 45 Degree Line for Single Layer Printed Circuit Board Rouitng Kyosuke Shinoda (Tokyo Tech), Yukihide Kohira (UoA), Atsushi Takahashi (Osaka Univ.) VLD2010-9 |
In recent VLSI systems, system performance increases while system size reduces. In Printed Circuit
Board (PCB) design, ... [more] |
VLD2010-9 pp.79-84 |