Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
EMD, CPM, OME |
2016-06-17 16:20 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Magnetic Pulse Welding of Copper Foils on Rigid and Flexible Printed Circuit Boards (2nd Report) Tomokatsu Aizawa (Tokyo Metropolitan College), Yoshitaka Sugiyama (Yazaki) EMD2016-15 CPM2016-22 OME2016-25 |
This paper describes a novel welding technique for overlapped copper foils of rigid and flexible printed circuit boards.... [more] |
EMD2016-15 CPM2016-22 OME2016-25 pp.39-42 |
EMCJ |
2016-04-15 16:20 |
Ishikawa |
Kanazawa Univ. |
[Special Talk]
EMC and electromagnetic wave technologies in Ishikawa Prefecture Yoshiyuki Yoshimura, Hirokazu Sugiura, Yuji Yonezawa, Naotaka Kato (IRII), Satoshi Yagitani (Kanazawa Univ.) EMCJ2016-8 |
The Industrial Research Institute of Ishikawa (IRII) promotes technical support for the local industry in Ishikawa Prefe... [more] |
EMCJ2016-8 pp.41-45 |
ICD, MW |
2016-03-02 10:00 |
Hiroshima |
Hiroshima University |
A Study of Multilayer Printed Wiring Boards Using the Anisotropic Conductive Paste Hidenori Ishibashi (MELCO), Kenji Nagase (MEE), Tetsu Owada, Yoichi Kitamura, Naofumi Yoneda, Hiroaki Miyashita (MELCO) MW2015-173 ICD2015-96 |
In recent years, the resin multilayer wiring boards are used in the radio frequency circuits. They use through hole via ... [more] |
MW2015-173 ICD2015-96 pp.1-4 |
EMCJ, WPT (Joint) |
2016-01-28 10:20 |
Kumamoto |
Kumamoto National Colle. Technology |
Reduction Technique of Radiation noise from power supply layers in PCB using Attached Resistor Method
-- Examination of optimum Resistance value -- Ryuji Minami, Shinichi Sasaki (Saga Univ.) EMCJ2015-106 |
Recently, information devices has high performance and the high-speed. Therefore, the radiation noise from the power sup... [more] |
EMCJ2015-106 pp.19-22 |
OPE, LQE, OCS |
2015-10-30 13:25 |
Oita |
Beppu International Convention Center |
Densely-aligned multilayered polymer optical waveguide with low interchannel crosstalk Yusuke Kogo, Kyuta Suzuki, Takaaki Ishigure (Keio Univ.) OCS2015-63 OPE2015-113 LQE2015-82 |
For the application to optical printed circuit boards, we developed the“Mosquito method,”as a fabrication technique for ... [more] |
OCS2015-63 OPE2015-113 LQE2015-82 pp.111-116 |
EMCJ, WPT (Joint) |
2015-01-22 11:25 |
Okinawa |
Okinawaken Jichikaikan |
Reduction Technique of Radiation noise from power supply layers in PCB using Attached Resistor Method
-- Application of Thin PCB -- Ryuji Minami, Shinichi Sasaki, Shunsuke Baba (Saga Univ) EMCJ2014-85 |
Along with high performance and the speed-up of the information devices, increase in radiation noise from the power supp... [more] |
EMCJ2014-85 pp.5-8 |
OME, OPE |
2014-11-21 13:50 |
Tokyo |
|
Bend insensitive graded index multimode polymer optical waveguides fabricated using the Mosquito method Asami Takahashi, Takaaki Ishigure (Keio Univ.) OME2014-49 OPE2014-129 |
In this paper, we fabricate low-loss graded index (GI) circular core multimode polymer optical waveguides with 90°bendin... [more] |
OME2014-49 OPE2014-129 pp.13-18 |
EE |
2014-10-10 13:30 |
Tokyo |
The Kikai-Shinko-Kaikan Bldg. |
The power supply circuit simulation in consideration of the wiring parasitism ingredient of the printed circuit board Masato Matsuo, Kazunori Hayami, Tatsuya Yamaguchi, Toshihiro Yamanaka (FUJITSU KYUSHU NETWORK TECHNOLOGIES), Muga Arai (FUJITSU ADVANCED TECHNOLOGIES) EE2014-17 |
In recent years, a power supply circuit is a tendency of the low voltage and high current. This is for evolution of devi... [more] |
EE2014-17 pp.13-16 |
MW, OPE, EMT, MWP, EST, IEE-EMT [detail] |
2014-07-17 10:50 |
Hokkaido |
Muroran Inst. of Tech. |
Low-loss Light Coupling to/from Multimode Polymer Optical Waveguides via 45-degree Mirrors Yoshie Morimoto, Asami Takahashi, Takaaki Ishigure (Keio Univ.) MW2014-63 OPE2014-32 EST2014-24 MWP2014-21 |
On-board optical interconnects are drawing much attention: in particular, optical printed circuit boards (O-PCBs) on whi... [more] |
MW2014-63 OPE2014-32 EST2014-24 MWP2014-21 pp.87-92 |
OME, EMD, CPM |
2014-06-20 11:20 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
An Evaluating Method for Fundamental Dynamical Parameters of Objects on a Printed Circuit Board (5)
-- Natural Frequency and Damping Ratio(2) -- Keiji Koshida, Shin-ichi Wada, Hiroaki Kubota (TMC), Koichiro Sawa (Nippon Inst. of Tech.) EMD2014-14 CPM2014-34 OME2014-22 |
Authors have obtained the steady-state responses using theoretical inputs developed by Fourier series and the analytical... [more] |
EMD2014-14 CPM2014-34 OME2014-22 pp.33-38 |
EMD |
2014-03-07 14:45 |
Kanagawa |
Yokohama Nat'l Univ. |
Effect evaluation of matching condition at a PIM frequency in PCB-PIM mesurements using the standing wave coaxial tube method Hironao Hanajima, Nobuhiro Kuga (Yokohama Nat'l Univ) EMD2013-155 |
To make non-contact PIM-characteristics evaluation of a printed circuitboard, a technique using plural capacitive-couple... [more] |
EMD2013-155 pp.25-28 |
EMCJ, WPT (Joint) |
2014-01-30 16:10 |
Saga |
Saga Univ. |
Crosstalk estimated in Analog-Digital Mixed Circuit Boards
-- The effect of ground slot -- Tomohiro Enda, Shinichi Sasaki, Shunsuke Baba (Saga Univ) EMCJ2013-119 |
In analog-digital mixed circuit boards ,power supply noises from the digital side to the analog side through GND layer i... [more] |
EMCJ2013-119 pp.45-49 |
EMD |
2013-12-20 14:30 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Experimental study of deviation reduction in PIM measurement of a detuned sample using Standing Wave Coaxial Tube Method Kumiko Morita, Nobuhiro Kuga (Yokohama Nat'l Univ.) EMD2013-132 |
This paper discusses experimental study of mesurement range in PIM mesurement of a detuned sample using Standing Wave Co... [more] |
EMD2013-132 pp.7-10 |
OPE, OME |
2013-11-22 17:25 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Fabrication of Low-loss and Low-crosstalk Graded-Index Polymer Optical Waveguide Circuit Using an Imprint Method Yohei Yamashita, Takaaki Ishigure (Keio Univ.) OME2013-76 OPE2013-137 |
We improve the fabrication procedure of our previous imprint method to obtain low-loss and low-crosstalk graded-index (G... [more] |
OME2013-76 OPE2013-137 pp.47-52 |
EST, MWP, OPE, MW, EMT, IEE-EMT [detail] |
2013-07-18 14:30 |
Hokkaido |
Wakkanai Synthesis Cultural Center |
Structure Design of Polymer Optical Waveguide for High Bandwidth Density On-Board Interconnects Ryota Kinoshita, Takaaki Ishigure (Keio Univ.) MW2013-69 OPE2013-38 EST2013-33 MWP2013-28 |
Currently, for further advancement of high performance computers (HPCs), optical interconnects are anticipated as a key ... [more] |
MW2013-69 OPE2013-38 EST2013-33 MWP2013-28 pp.131-136 |
EMCJ |
2013-07-11 10:55 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Noise immunity design for multilayer printed circuit boards using fast electromagnetic simulation Mamoru Kamikura, Yuichiro Murata, Yudai Yoneoka (Mitsubishi Electric Corp.) EMCJ2013-29 |
We report on noise immunity design for multilayer printed circuit boards using fast electromagnetic simulation, and its ... [more] |
EMCJ2013-29 pp.11-14 |
EMD |
2013-05-17 13:35 |
Hokkaido |
Chitose Arcadia Plaza |
Magnetic Pulse Welding of Copper Foils on Rigid and Flexible Printed Circuit Boards Tomokatsu Aizawa (Tokyo Metropolitan College) EMD2013-1 |
This paper describes a novel welding technique for copper foils on rigid and flexible printed circuit boards and its exp... [more] |
EMD2013-1 pp.1-4 |
EMCJ |
2013-04-12 11:30 |
Okayama |
Okayama Univ. |
Quantitative estimation of total EMI radiation with normal-mode and common-mode antenna models Tetsushi Watanabe (Industrial Technology Center of Okayama Prefecture), Yuri Wakaduki, Yoshitaka Toyota, Kengo Iokibe (Okayama Univ.) EMCJ2013-2 |
The currents of two modes, normal mode and common mode flow along two-conductor lines placed in the air. We have so far ... [more] |
EMCJ2013-2 pp.7-12 |
EMCJ, ITE-BCT |
2013-03-08 10:15 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
ESD Noise Propagation Mechanism of the Transmission Line in the Same Side as the Injection Point on PCB Tsutomu Hara, Yasumaro Komiya, Takashi Suga, Hideki Osaka, Hitoshi Yokota (Hitachi) EMCJ2012-125 |
The behavior of ESD noise was analyzed by experiments and numerical simulation. ESD was directly applied to the GND trac... [more] |
EMCJ2012-125 pp.13-18 |
VLD |
2013-03-05 14:30 |
Okinawa |
Okinawa Seinen Kaikan |
A Routing Method Considering Wirelength of Each Net for Single Layer PCB Routing Kyosuke Shinoda, Atsushi Takahashi (Tokyo Inst. of Tech.) VLD2012-149 |
In recent Printed Circuit Board (PCB) design, due to the growth of the density and the increase of the design scale the ... [more] |
VLD2012-149 pp.77-82 |