Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
SDM |
2023-10-13 13:00 |
Miyagi |
Niche, Tohoku Univ. |
[Invited Talk]
Defect Reduction in UV Nanoimprint Lithography Toshiki ITO (Canon) SDM2023-54 |
Field-by-field type UV nanoimprint lithography equipped with on-demand inkjet dispense system has been developed, which ... [more] |
SDM2023-54 pp.1-6 |
US |
2023-07-28 10:35 |
Fukuoka |
West Japan General Exhibition Center Annex |
Viscosity behavior of low viscosity samples in the low shear rate range Miki Horanp (Univ. of Tokyo), Taichi Hirano (Meiji Univ.), Shujiro Mitani, Keiji Sakai (Univ. of Tokyo) US2023-28 |
The viscosity behavior of “low viscous liquid in the low shear-rate region” was evaluated with an EMS viscometer. EMS i... [more] |
US2023-28 pp.53-56 |
US |
2022-07-29 16:25 |
Fukuoka |
Kyushu Univ. (Chikushi Campus) |
Fabrication of picoliter droplet of non-Newtonian viscous liquid Shujiro Mitani (Univ. Tokyo), Satoshi Ishida (Nippon Paint Corporate Solutions), Keiji Sakai (Univ. Tokyo) US2022-28 |
A novel device for fabricating picoliter droplets has been developed that can be made highly viscous liquids into drople... [more] |
US2022-28 pp.40-43 |
MW |
2021-03-05 15:20 |
Online |
Online |
RF circuit combined inkjet-printed silver wire and copper foil wire Yuta Sugiyama, Hidenori Ishibashi, Takeshi Oshima, Toru Takahashi, Yoshio Inasawa (Mitsubishi Electric), Hikaru Harada (Kishu Giken Kogyo) MW2020-99 |
In this paper we present RF circuit combined inkjet-printed silver wiring and copper foil wiring. Since the inkjet print... [more] |
MW2020-99 pp.43-48 |
EA, ASJ-H, EMM |
2020-11-20 13:30 |
Online |
Online |
[Poster Presentation]
Improved accuracy of QR code authenticity judgment algorithm Kengo Sato (TUS), Kitahiro Kaneda (OPU), Keiichi Iwamura (TUS) EA2020-43 EMM2020-58 |
E-mail: †{sato_kengo, kaneda}@sec.ee.kagu.tus.ac.jp, ‡iwamura@ee.kagu.tus.ac.jp
Abstract Currently, the distribution... [more] |
EA2020-43 EMM2020-58 pp.117-122 |
US |
2018-07-31 11:05 |
Kyoto |
|
Measurement of liquid properties with high time resolution by inkjet system Natsuki Yamaoka, Ryohsuke Yokota, Taichi Hirano, Shujiro Mitani, Keiji Sakai (UTokyo) US2018-31 |
Observation and measurement of parameters, which are determined with surface and interfacial physical properties of liqu... [more] |
US2018-31 pp.5-9 |
US, EA (Joint) |
2018-01-24 10:55 |
Osaka |
|
Measurement of dynamic interfacial tension by shape analysis of flying droplets Natsuki Yamaoka, Ryohsuke Yokota, Ryo Asai, Taichi Hirano, Shujiro Mitani, Keiji Sakai (UTokyo) US2017-104 |
We developed a method for simultaneous measurement of dynamic surface and interfacial tension in the time range from hun... [more] |
US2017-104 pp.119-123 |
EA, US (Joint) |
2017-01-26 14:05 |
Kyoto |
Doshisha Univ. |
Surface dynamics in collision of microdroplets fully covered with surfactant Ryohsuke Yokota, Ryo Asai, Daichi Hayakawa, Shujiro Mitani, Keiji Sakai (UTokyo) US2016-115 |
When two flying microdroplets collide to each other, dynamic liquid process such as fusion or fabrication of capsule str... [more] |
US2016-115 pp.215-218 |
US |
2016-08-25 14:50 |
Tokyo |
Tokyo Institute of Technology, Ookayama Campus |
Traveling wave propagation observed in cylindrical inkjet printhead
-- Measurement of sound velocity in water and its singular point -- Naoki Morita (Fuji Xerox) US2016-40 |
Inkjet printhead having width of 300 mm and 110 nozzles which are aligned along with cylindrical fluidic tube generated ... [more] |
US2016-40 pp.13-17 |
US |
2016-07-29 14:20 |
Fukuoka |
Chikushi Campus, Kyushu University |
A new method for accurate size measurement of microdroplets by light scattering and its applications Daichi Hayakawa, Yusuke Matsuura, Shujiro Mitani, Keiji Sakai (Univ. of Tokyo) US2016-32 |
The physical characteristics of airborne microdroplets generated by inkjet system are peculiar in that they are small ye... [more] |
US2016-32 pp.7-10 |
US, EA (Joint) |
2016-01-28 13:25 |
Osaka |
Kansai University, Centenary Memorial Hall |
Observation of Light Scattering Pattern of Airborne Microdroplets Daichi Hayakawa, Toko Hamaguchi, Yuji Shimokawa, Shujiro Mitani, Keiji Sakai (UTokyo) US2015-84 |
A concise, prompt, and accurate method for measuring the size of airborne microdroplets has been distinguished. A drople... [more] |
US2015-84 pp.7-11 |
US, EA (Joint) |
2015-01-28 13:25 |
Kyoto |
Doshisha Univ. |
Measurement of Dynamic Surface Tension with Observation of Oscillation of Flying Micro-droplets Touko Hamaguchi, Yuji Shimokawa, Shujiro Mitani, Keiji Sakai (Univ. of Tokyo) US2014-75 |
In the printing system, a droplet impacts onto the substrate within time shorter than 1 ms after the emission. Adsorptio... [more] |
US2014-75 pp.5-7 |
US |
2013-07-30 11:10 |
Fukuoka |
Chikushi Campus, Kyushu University |
Measurement of Dynamic Surface Tension by Observing Oscillation of Microdroplets Akihiro Honda, Takahito Sakai, Tomoki Ishiwata, Keiji Sakai (Univ. of Tokyo) US2013-36 |
The dynamic surface tension, just after the new surface is made, affects various microscale phenomena such as the behavi... [more] |
US2013-36 pp.77-80 |
CPM |
2012-08-08 15:45 |
Yamagata |
|
Contact resistance of bottom contact organic TFTs with silver electrodes patterned by inkjet-printing Yu Kobayashi, Yasunori Takeda, Tsukuru Minamiki, Ryo Sugano, Kenjiro Fukuda, Daisuke Kumaki, Shizuo Tokito (Yamagata Univ.) CPM2012-39 |
Recently, the development of Silver nanoparticle ink in low-sintering-temperature and low-resistivity are progressing. T... [more] |
CPM2012-39 pp.27-29 |
US |
2012-07-27 11:50 |
Kyoto |
KEM |
Manipulation of an In-flight Insulating Microdroplet by a Pair of Rectangular Electrodes Takahito Sakai, Tomoki Ishiwata, Keiji Sakai (Tokyo Univ.) US2012-31 |
Inkjet is one of the most prospective technologies for microfabrication using soft materials as well as printing and pat... [more] |
US2012-31 pp.65-68 |
US |
2010-07-23 11:30 |
Tokyo |
Institute of Industrial Science, the University of Tokyo |
Generation of the high viscous droplets with inkjet device Tomoki Ishiwata, Keiji Sakai (Univ. of Tokyo.) US2010-41 |
Taking the request to apply the inkjet technique to the high-viscous liquids, we improved the continuous inkjet techniqu... [more] |
US2010-41 pp.41-44 |
SDM |
2009-12-04 16:10 |
Nara |
NAIST |
Stability Improvement of Printer Ink Tomohiro Oba, Sinya Maeta, Masaki Yamaguchi (Shibaura Ins. of Tech.) SDM2009-167 |
We aims for the formation of ferroelectric thin films by inkjet print method. There is an advantage that this method can... [more] |
SDM2009-167 pp.83-88 |
SDM |
2008-12-05 15:10 |
Kyoto |
Kyoto University, Katsura Campus, A1-001 |
Electrical Properties of Ferroelectric Thin Films by Alcohol Rerated Materials Masaki Yamaguchi, Tomohiro Oba (Shibaura Inst. of Tech.), Yoichiro Masuda (Hachinohe Inst. of Tech.) SDM2008-192 |
The inkjet technique is devised as one of the thin film formation method of the next generation. We synthesized the ferr... [more] |
SDM2008-192 pp.43-47 |
OME |
2008-05-29 13:00 |
Tokyo |
Denki-Club, Meeting room 3 |
Printed plastic micromechanical switches for the application to large-area electronics Tomoyuki Yokota, Shintaro Nakano, Tsuyoshi Sekitani, Takao Someya (Tokyo Univ.) OME2008-21 |
We fabricated plastic micromechanical system switches by inkjet printing. In these switches, metal electrodes prepared o... [more] |
OME2008-21 pp.1-6 |
SDM |
2007-12-14 17:20 |
Nara |
Nara Institute Science and Technology |
Fabrication and Physical Properties of Ferroelectric Thin Films by Alcohol-related Materials Masaki Yamaguchi (Shibaura Inst. of Tech.), Yoichiro Masuda (Hachinohe Inst. of Tech.) SDM2007-236 |
The inkjet technique is devised as one of the thin film formation method of the next generation. We synthesized the ferr... [more] |
SDM2007-236 pp.59-62 |