Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
EMCJ, MICT (Joint) |
2024-03-15 16:35 |
Shimane |
|
A method to analyze branching wire-harness as a multiconductor transmission line Noboru Maeda (SOKEN), Keishi Miwa (TMC) EMCJ2023-110 |
Wire-harnesses are an important element in electromagnetic noise propagation in vehicles, but because many electric wire... [more] |
EMCJ2023-110 pp.35-40 |
EMCJ |
2023-04-21 15:25 |
Ishikawa |
Kanazawa University (Primary: On-site, Secondary: Online) |
Dependence of Wire Harness Configuration on Radiated Emissions Measurement of Automotive Equipment Yu Munemoto, Tohlu Matsushima, Yuki Fukumoto (Kyutech) EMCJ2023-5 |
In recent years, with developments in automated driving technology, high reliability is required for in-vehicle communic... [more] |
EMCJ2023-5 pp.21-26 |
EMCJ, MICT (Joint) |
2023-03-17 15:15 |
Tokyo |
Kikai-Shinko-Kaikan Bldg (Primary: On-site, Secondary: Online) |
Statistical Modeling of Automotive Component Noise-Source Including Load Change Noboru Maeda (SOKEN), Keishi Miwa (TMC) EMCJ2022-93 |
Electromagnetic noise is often a phenomenon with large fluctuation, so, it is effective to understand the noise source c... [more] |
EMCJ2022-93 pp.7-12 |
MICT, EMCJ (Joint) |
2022-03-04 11:35 |
Online |
Online |
Parameter Estimation of Automotive Component Noise Source Using Wire-harness Loaded Bench Noboru Maeda, Kengo Fukunaga (SOKEN), Keishi Miwa (TMC) EMCJ2021-75 |
Measurement setting conditions and calculation basis for the method to obtain the noise-source equivalent-circuit model ... [more] |
EMCJ2021-75 pp.15-19 |
EMCJ, MICT (Joint) |
2021-03-05 09:05 |
Online |
Online |
Improvement of the Estimation Results by Consistency Evaluation of Measured Data for Indirect Measurement Method Noboru Maeda, Kengo Fukunaga (SOKEN), Keishi Miwa, Soichiro Ota (TMC) EMCJ2020-72 |
A consistency analysis procedure for our previously proposed indirect measurement method for the S-parameters of a multi... [more] |
EMCJ2020-72 pp.1-6 |
EMCJ |
2019-04-11 13:05 |
Okinawa |
Okinawa Industry Support Center |
A Novel Modeling Method for Bulk Current Injection Probe Clamping Multiple Wires Takanori Uno, Ichiro Akahori (DENSO EMCES), Yoichiro Hara, Yasunori Iwata (DENSO TECHNO) EMCJ2019-1 |
In this paper, consideration is made to create a simulation model of the BCI test method, which is one of the EMC evalua... [more] |
EMCJ2019-1 pp.1-6 |
EMCJ |
2017-11-22 15:15 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Non-Contact Measurement of Common Mode Load Impedance of Wire Harness upto High Frequencies based on Transmission Line Concept Tomohiro Yoshikawa, Jianqing Wang (NIT), Yasunori Oguri, Makoto Tanaka, Michihira Iida (DENSO) EMCJ2017-73 |
Request to non-contact measurement method of load impedance connected to a wire harness is increasing rapidly.
A method... [more] |
EMCJ2017-73 pp.51-56 |
EMCJ, EMD |
2016-07-15 14:05 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Non-contact measuring method for impedance of harness's load using two probes Tomohiro Yoshikawa, Jianqing Wang (NIT), Yasunori Oguri, Makoto Tanaka, Michihira Iida (DENSO) EMCJ2016-44 EMD2016-17 |
Request to non-contact measurement method of load impedance connected to a wire harness is increasing rapidly.
A method... [more] |
EMCJ2016-44 EMD2016-17 pp.1-5 |
EMCJ, IEE-EMC, MW, EST [detail] |
2015-10-22 10:30 |
Miyagi |
Sakura Hall, Katahira Campus, Tohoku Univ. |
Fabrication and evaluation of small sensor node for wireless health monitoring system in the RVT Satoshi Yoshida (Kagoshima Univ.), Akihira Miyachi (JAXA), Kenjiro Nishikawa (Kagoshima Univ.), Shigeo Kawasaki (JAXA) EMCJ2015-62 MW2015-101 EST2015-72 |
In this paper, we evaluate system feasibility of the wireless sensor network system powerd by the mi-
crowave power tra... [more] |
EMCJ2015-62 MW2015-101 EST2015-72 pp.17-22 |
EMCJ, IEE-EMC |
2013-06-21 14:00 |
Kyoto |
Kyoto Univ. |
An Estimation Method for the 3 Port S Parameters of Reciprocal Circuits with 1 Port Measurements Noboru Maeda, Shinji Fukui (NIPPON SOKEN), Toshikazu Sekine, Yasuhiro Takahashi (Gifu Univ.) EMCJ2013-20 |
An estimation method of the three-port S-parameters for reciprocal circuits is presented. In this method, several known ... [more] |
EMCJ2013-20 pp.45-49 |
EMCJ |
2007-12-07 10:35 |
Shizuoka |
Create HAMAMATSU |
FDTD Calculation of Conduction Noise Currents from Printed circuit Board with Ground-Layer Slits Hiroya Ueyama (NIT), Tsuyoshi Maeno (DENSO), Akimasa Hirata, Jianqing Wang, Osamu Fujiwara (NIT) EMCJ2007-96 |
Electromagnetic disturbances for vehicle-mounted radios can be caused mainly by the conduction noise currents flowing ou... [more] |
EMCJ2007-96 pp.1-6 |
EMCJ |
2005-09-09 13:15 |
Kyoto |
Kyoto University |
An Approach to Predict Conducted Noise Current Spectra from Electronics Equipments for Vehicles Tsuyoshi Maeno, Kouji Ichikawa, Takanori Uno, Masaki Miyamoto, Kenji Katoh (DENSO) |
In this paper we made an investigation for reducing electromagnetic emission radiated from electronic equipment for vehi... [more] |
EMCJ2005-72 pp.79-84 |