Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
AP |
2013-05-17 14:50 |
Oita |
Beppu International Convention Center B-ConPlaza |
Duplex Wireless Power Transmission with a Directional Coupler for Interference Reduction Kengo Nishimoto (Mitsubishi Electric), Kenzaburo Hitomi (Mitsubishi Electric Engineering), Takeshi Oshima, Toru Fukasawa, Hiroaki Miyashita (Mitsubishi Electric), Yoshiyuki Takahashi, Yoshiyuki Akuzawa (Mitsubishi Electric Engineering) AP2013-31 |
In duplex wireless power transmission using electromagnetic resonant coupling, a method of reducing interference by addi... [more] |
AP2013-31 pp.85-90 |
MW |
2013-03-07 10:35 |
Hiroshima |
Hiroshima Univ. |
Ku/Ka-Band Wideband Waveguide Orthomode Junction with Low Pass Filters for High Power Applications Hidenori Yukawa (Mitsubishi Electric Corp.), Ryosuke Kobayashi (Mitsubishi Electric Engineering Co. Ltd.), Koji Yoshida, Tomohiro Mizuno, Tetsu Owada, Moriyasu Miyazaki (Mitsubishi Electric Corp.) MW2012-171 |
Waveguide orthomode junction (OMJ) is one of key components of antenna feed systems for satellite communication. It work... [more] |
MW2012-171 pp.63-68 |
EMCJ |
2013-01-11 14:20 |
Nagasaki |
Nagasaki Univ. |
Differential and Common-mode Noise Evaluation in Mains Terminal Disturbance Voltage Kenji Hirose (Mitsubishi Electric), Takefumi Kumamoto (Mitsubishi Electric Engineering), Yuichi Sasaki, Naoto Oka (Mitsubishi Electric) EMCJ2012-118 |
A conducted noise in the power line of an electronic equipment is evaluated as Mains Terminal Disturbance Voltage, that ... [more] |
EMCJ2012-118 pp.93-98 |
EMCJ, ITE-BCT |
2012-03-16 11:20 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
A Study on EMC Design of Differential Transmission Line Satoshi Yoneda (Mitsubishi), Shogo Ushio (MEE), Chiharu Miyazaki, Naoto Oka (Mitsubishi) EMCJ2011-135 |
[more] |
EMCJ2011-135 pp.31-35 |
MW |
2012-03-02 14:45 |
Saga |
Saga University |
A study on suppression of undesired leakage from the BGA interconnects using unified ground through-hole lands of the NSMD pads Takeshi Yuasa (Mitsubishi Electric Co.), Hideki Tsuzuki (Mitsubishi Electric Engineering Co., Ltd.), Takuo Morimoto, Tetsu Owada, Naofumi Yoneda (Mitsubishi Electric Co.) MW2011-187 |
[more] |
MW2011-187 pp.109-113 |
AP |
2012-01-18 14:35 |
Fukuoka |
Kyushu Inst. of Tech. |
Axial Ratio Characteristics of an Aperiodic Array Antenna Using Sequentially Rotated Array Technique Ryousuke Yoshimura, Shigeru Makino, Shin-ichi Betsudan, Tetsuo Hirota, Keisuke Noguchi, Kenji Itoh (KIT), Takanori Satake (MEE), Hikaru Watanabe (Mitsubishi Electric) AP2011-155 |
A method to reduce the cost of a phased array antenna and to suppress grating lobes is an aperiodic array antenna using ... [more] |
AP2011-155 pp.53-57 |
AP, WPT (Joint) |
2011-10-13 10:15 |
Kanagawa |
Kanagawa Womens Center |
RCS Measurement Results of Simplified Aircraft Model at Outdoor Ground-Plane Range Yasuhiro Nishioka, Yoshio Inasawa (MELCO), Hisashi Takada (MEE), Jun Endo, Masayuki Saito, Kei Hayashi, Naofumi Yoneda, Yoshihiko Konishi (MELCO) AP2011-78 |
There is a demand to establish measurement techniques that can measure radar cross section (RCS) of electrically and phy... [more] |
AP2011-78 pp.7-12 |
AP |
2011-05-12 15:50 |
Kagoshima |
|
Design of A Spherical Reflector Antenna with Shaping Reflectors Shuji Urasaki (HIT), Naoki Okada (MEE) AP2011-13 |
In a sperical reflector antenna consisiting of a main reflector of spherical surface, a sub-reflector of non-quadric sur... [more] |
AP2011-13 pp.43-48 |
AP |
2011-01-20 09:50 |
Saga |
Saga Univ. |
Design and Evaluation of HF- and UHF-band Hybrid Card-Type RFID Tag That Utilizes HF-Coil as UHF Antenna Conductor Yasuhiro Nishioka (MELCO), Kenzaburo Hitomi (MEE), Hirokatsu Okegawa, Tomohiro Mizuno, Toru Fukasawa, Hiroaki Miyashita, Yoshihiko Konishi (MELCO), Yoshikazu Iida (Toppan Forms) AP2010-135 |
[more] |
AP2010-135 pp.13-18 |
AP, SAT (Joint) |
2010-07-22 10:50 |
Hokkaido |
Kitami Inst. Tech. |
Reflector Shaping Method of an Axially Symmetrical Spherical Reflector Antenna Shuji Urasaki (Hiroshima Inst. of Tech.), Naoki Okada (Mitsubishi Electric Engneeering) AP2010-52 |
In an axially symmetrical reflector antenna having the sub-reflector and the additional reflector of non-quadric surface... [more] |
AP2010-52 pp.81-86 |
AP |
2010-01-21 12:55 |
Yamaguchi |
Yamaguchi University |
Effect of capacitive connection between coil windings on UHF monopole antenna configuration for HF- and UHF-bands hybrid card-type RFID tag Yasuhiro Nishioka (Mitsubishi Electric Corp.), Kenzaburo Hitomi (Mitsubishi Electric Engineering Corp.), Tomohiro Mizuno, Hirokatsu Okegawa, Toru Fukasawa, Hiroaki Miyashita, Yoshihiko Konishi (Mitsubishi Electric Corp.) AP2009-161 |
The demand for RFID tags that can be read by both HF and UHF RFID systems has been rapidly increasing. The authors have ... [more] |
AP2009-161 pp.33-38 |
EMCJ |
2010-01-22 10:30 |
Okinawa |
University of the Ryukyus |
Evaluation of Noise Voltage Transmitted from an External Cable to PCB's Signal Traces Takefumi Kumamoto, Hiroyuki Matsumura (Mitsubishi Electric Engineering Company Limited), Naoto Oka, Koichiro Misu (Mitsubishi Electric Corp.) EMCJ2009-114 |
This study experimentally clarifies the relationship between the common mode noise induced on the cable connected to the... [more] |
EMCJ2009-114 pp.93-98 |
EMCJ |
2009-06-05 13:35 |
Tokyo |
Tokyo Big Sight (Tokyo International Exihibition Center) |
A Study on Shield Structure of a Connector Substrate with Single Point Ground Plane Connection Satoshi Yoneda (Mitsubishi Electric Corp.), Takefumi Kumamoto (Mitsubishi Electric Engineering Co.Ltd.), Chiharu Miyazaki, Naoto Oka (Mitsubishi Electric Corp.) EMCJ2009-28 |
In recent years, noise radiation from a connector substrate which consists of printed boards and a connector sometimes c... [more] |
EMCJ2009-28 pp.35-39 |
MW, SCE |
2009-04-23 09:45 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
A Millimeter-wave Stepped Multiple Frequency Oscillator with Phase Coherency Hiroyuki Mizutani (Mitsubishi Electric Corp.), Takehiro Hayashi (Mitsubishi Electric Engineering Co., Ltd.), Masaomi Tsuru, Kenji Kawakami, Morishige Hieda (Mitsubishi Electric Corp.) SCE2009-1 MW2009-1 |
An oscillator for stepped multiple frequency interrupted continuous wave radar requires switching stepped multiple frequ... [more] |
SCE2009-1 MW2009-1 pp.1-4 |
AP |
2009-02-12 14:50 |
Tokyo |
Tokyo University of Agriculture and Technology |
Experimental Investigation of UHF Antenna Construction for HF- and UHF-bands Hybrid Card-Type RFID Tag Yasuhiro Nishioka (Mitsubishi Electric Co.), Kenzaburo Hitomi, Akiko Katayama (Mitsubishi Electric Engineering Co.), Tomohiro Mizuno, Hirokatsu Okegawa, Toru Fukasawa, Hiroaki Miyashita, Yoshihiko Konishi (Mitsubishi Electric Co.) AP2008-199 |
The purpose of this paper is to find an effective UHF-antenna construction for an HF- and UHF- bands hybrid card-type RF... [more] |
AP2008-199 pp.61-66 |
MW |
2008-12-12 17:05 |
Toyama |
Toyama-Univ. Gofuku-camp. |
A Millimeter-wave Reduced-sized Power Divider with Shunt Capacitors Embedded in Multilayered Substrates Yukihiro Tahara, Takeshi Yuasa (Mitsubishi Electric.Co.), Kenji Nagase (Mitsubishi Electric Engineering. Co Ltd.), Naofumi Yoneda (Mitsubishi Electric.Co.) MW2008-161 |
Various reduced-sized Wilkinson power dividers loaded with capacitors or stubs have been reported. In this report, a com... [more] |
MW2008-161 pp.87-90 |
ISEC |
2008-09-12 17:00 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
How to introduce the dynamic key to a provably Secure Block Cipher using FPGA Partial Reconfiguration Kenji Takahashi, Tetsuya Ichikawa (Mitsubishi Electric Engineering), Toru Sorimachi (Mitsubishi Electric) ISEC2008-72 |
Cipher circuits are required both to have high security and to show high performance as to circuit scale and processing ... [more] |
ISEC2008-72 pp.63-68 |
OPE, EMT, MW |
2008-07-25 10:15 |
Hokkaido |
|
ASK and Pi/4-QPSK Dual Mode SiGe-MMIC Transceiver for 5.8GHz DSRC Terminals having Stabilized Amplifier Chain Shintaro Shinjo, Koji Tsutsumi, Kazutomi Mori, Hiroshi Okada (Mitsubishi Electric Corp.), Masahiro Inoue (Mitsubish Electric Engineering Corp.), Noriharu Suematsu (Mitsubishi Electric Corp.) MW2008-75 OPE2008-58 |
[more] |
MW2008-75 OPE2008-58 pp.157-162 |
EMCJ |
2008-03-07 10:00 |
Tokyo |
Kikai-Shinko-Kaikan Bldg |
Implementation Method of Line Noise Filters Yasuhiro Sekimoto (Mitsubishi Electric Corp.), Takefumi Kumamoto (Mitsubishi Electric Engineering Corp.), Chiharu Miyazaki, Naoto Oka, Yoshihiko Konishi (Mitsubishi Electric Corp.) EMCJ2007-118 |
Line noise filters are mounted in electronic equipments in order to reduce the electromagnetic noise on the power supply... [more] |
EMCJ2007-118 pp.7-12 |
EA |
2007-11-16 10:00 |
Kumamoto |
Kumamoto University |
A Study of Dynamic SSB Modulator for Parametric Loudspeaker Shinichi Sakai (MEE), Hidetoshi Aiko, Kenta Nomura, Tomoo Kamakura, Kenichi Aoki (UEC), Shunji Yoshida (MEE) EA2007-80 |
A parametric loudspeaker system, which presents remarkably narrow directivity compared with a conventional loudspeaker, ... [more] |
EA2007-80 pp.1-6 |