Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
EMCJ, EMD |
2008-07-18 12:25 |
Tokyo |
Kikai-Shinko-Kaikan Bldg |
Determination of Gain for Double-Ridge Guide Horn Antenna on Basis of Phase Center Location Katsushige Harima (NICT) EMCJ2008-40 EMD2008-22 |
EMI antennas used above 1GHz are generally calibrated in an anechoic chamber using the three-antenna method. The distanc... [more] |
EMCJ2008-40 EMD2008-22 pp.1-4 |
EMCJ, EMD |
2008-07-18 12:50 |
Tokyo |
Kikai-Shinko-Kaikan Bldg |
Improvement for Accurate Measurement of finger's Complex Permittivity by Waveguide-Penetration Method Hikaru Saito, Masaki Kouzai, Takahiro Aoyagi (Tokyo Tech.), Atsuhiro Nishikata (Tokyo Tech./NICT), Soichi Watanabe (NICT) EMCJ2008-41 EMD2008-23 |
[more] |
EMCJ2008-41 EMD2008-23 pp.5-10 |
EMCJ, EMD |
2008-07-18 13:15 |
Tokyo |
Kikai-Shinko-Kaikan Bldg |
Estimation of sheet resistance of thin material by using DFFC Toshihide Tosaka (NICT), Atsuhiro Nishikata (TITECH/NICT), Kaori Fukunaga, Yukio Yamanaka (NICT), Yoshiyuki Yoshimura (IRII) EMCJ2008-42 EMD2008-24 |
[more] |
EMCJ2008-42 EMD2008-24 pp.11-14 |
EMCJ, EMD |
2008-07-18 13:50 |
Tokyo |
Kikai-Shinko-Kaikan Bldg |
Immunity Estimation for Printed Circuit Boards to Electrostatic Discharge by Circuit Simulation and Conducted Immunity Measurement of ICs Yasuhiro Shiraki (Mitsubishi Elec. Corp.) EMCJ2008-43 EMD2008-25 |
Abstract The author proposed a hybrid method as ESD estimation technique at design stage. It consists of a conducted im... [more] |
EMCJ2008-43 EMD2008-25 pp.15-20 |
EMCJ, EMD |
2008-07-18 14:15 |
Tokyo |
Kikai-Shinko-Kaikan Bldg |
Validation of Spark Resistance Formula Applied for Human ESD Yoshinori Taka, Osamu Fujiwara (NIT) EMCJ2008-44 EMD2008-26 |
It is well known that human electrostatic discharge (ESD) events cause serious malfunctions in high-tech information dev... [more] |
EMCJ2008-44 EMD2008-26 pp.21-26 |
EMCJ, EMD |
2008-07-18 14:40 |
Tokyo |
Kikai-Shinko-Kaikan Bldg |
Experimental Study on Radiated Electromagnetic Field Strength due to Micro Gap Discharge Below 1kV Ken Kawamata (Hachinohe Inst. of Tech.), Shigeki Minegishi, Akira Haga (Tohoku Gakuin Univ.), Osamu Fujiwara (NIT) EMCJ2008-45 EMD2008-27 |
Abstract Relationship between breakdown field strength and radiated electromagnetic field strength was examined in expe... [more] |
EMCJ2008-45 EMD2008-27 pp.27-30 |
EMCJ, EMD |
2008-07-18 15:15 |
Tokyo |
Kikai-Shinko-Kaikan Bldg |
Analysis of 3rd-Order Passive Intermodulation gernerated from Metallic Materials Daijiro Ishibashi, Nobuhiro Kuga (Yokohama Nat'l Univ.) EMCJ2008-46 EMD2008-28 |
This report presents an analysis method of current-mode passive intermodulation generated from a conductive material in ... [more] |
EMCJ2008-46 EMD2008-28 pp.31-36 |
EMCJ, EMD |
2008-07-18 15:40 |
Tokyo |
Kikai-Shinko-Kaikan Bldg |
Degradation phenomenon of electrical contacts by hammering oscillating mechanism
-- modeling of the oscillating mechanism (II) -- Shin-ichi Wada, Keiji Koshida, Taketo Sonoda, Hiroto Minegishi, Mitsuo Kikuchi, Hiroaki Kubota (TMC), Koichiro Sawa (Keio Univ.) EMCJ2008-47 EMD2008-29 |
We have developed the mechanism which gives vibration to electrical contacts by hammering oscillation and studied the in... [more] |
EMCJ2008-47 EMD2008-29 pp.37-42 |
EMCJ, EMD |
2008-07-18 16:05 |
Tokyo |
Kikai-Shinko-Kaikan Bldg |
A measurement of the arrival time of the steady contact voltage at the slowly making contacts (Part 2)
-- The relationship between AgPd content rate and the arrival time of the steady contact voltage -- Kazuaki Miyanaga, Yoshiki Kayano (Akita Univ.), Tasuku Takagi (Em. Prof. Tohoku University), Hiroshi Inoue (Akita Univ.) EMCJ2008-48 EMD2008-30 |
The relationship between initial phenomenon of the opening electrical contacts and the physical properties is not clear ... [more] |
EMCJ2008-48 EMD2008-30 pp.43-48 |
EMCJ, EMD |
2008-07-18 16:30 |
Tokyo |
Kikai-Shinko-Kaikan Bldg |
Magnetic drive by a small magnet of break arc occurring between electrical contacts in a DC42V/7-21A circuit Junya Sekikawa, Takayoshi Kubono (Shizuoka Univ.) EMCJ2008-49 EMD2008-31 |
Break arcs are generated between pure silver electrical contacts in a DC42V resistive circuit. The contacts are separate... [more] |
EMCJ2008-49 EMD2008-31 pp.49-54 |