11月14日(水) 午前 委員長挨拶 座長: 曽根秀昭 09:20 - 09:30 |
|
09:20-09:30 |
委員長挨拶 ( 10分 ) |
11月14日(水) 午前 <<Session 1>> --Fretting-- 座長: Hideaki Sone 09:30 - 10:30 |
(1) |
09:30-09:50 |
Frequency Influencing of Fretting Corrosion of Tin Plated Contacts |
○Yasushi Saitoh・Naoyuki Sato・Terutaka Tamai・Kazuo Iida(Mie Univ.)・Tetsuya Ito・Shigeru Sawada・Yasuhiro Hattori(AutoNetworks Technologies) |
(2) |
09:50-10:10 |
Microscopic Observation of Fretting Corrosion of Tin Plated Contacts |
○Hirosaka Ikeda・Tetsuya Ito・Shigeru Sawada・Yasuhiro Hattori(AutoNetworks Technologies)・Yasushi Saitoh・Terutaka Tamai・Kazuo Iida(Mie Univ.) |
(3) |
10:10-10:30 |
Micro-structural Study of Fretting Contact caused by the difference of the tin plating thickness |
○Tetsuya Ito・Shigeru Sawada・Yasuhiro Hattori(AutoNetworks Technologies)・Yasushi Saitoh・Terutaka Tamai・Kazuo Iida(Mie Univ.) |
|
10:30-10:45 |
休憩 ( 15分 ) |
11月14日(水) 午前 <<Session 2>> --Sliding Contact-- 座長: Noboru Wakatsuki 10:45 - 11:45 |
(4) |
10:45-11:05 |
The Relationship between Contact Resistance and Frictional Coefficient under High Current Sliding Contact |
○Takahiro Ueno・Kenichi Kadono・Shinji Yamaguchi・Noboru Morita(Nippon Inst. of Tech.)・Akio Tanaka(Oyama Nat'l College of Tech.) |
(5) |
11:05-11:25 |
Influence of Surface Finish Processing on Contact Voltage Drop of Sliding Contact |
○Kenichi Kadono・Takahiro Ueno・Shinji Yamaguchi・Noboru Morita(Nippon Inst. of Tech.)・Akio Tanaka(Oyama Nat'l College of Tech.) |
(6) |
11:25-11:45 |
Brush Sliding Contact Voltage Deviation Analysis based on the Evaluation of Displacement Excited Vibration caused by the Collector Ring Profile Distortion
-- for Turbine Generators & Traction Motors -- |
○Makoto Takanezawa・Hiroyuki Yanagisawa・Takahiro Ueno・Noboru Morita(Nippon Inst. of Tech.) |
|
11:45-13:00 |
昼食 ( 75分 ) |
11月14日(水) 午後 <<Session 3>> --Arc Interruption-- 座長: Terutaka Tamai 13:00 - 14:40 |
(7) |
13:00-13:20 |
Measurement of Current Noise up to GHz from Slowly Breaking AgSnO2 Contact with External Magnetic Field |
○Hikaru Miura・Yoshiki Kayano・Kazuaki Miyanaga・Hiroshi Inoue(Akita Univ.) |
(8) |
13:20-13:40 |
Motion of Break Arcs Driven by External Magnetic Field in a DC42V Resistive Circuit |
○Junya Sekikawa・Takayoshi Kubono(Shizuoka Univ.) |
(9) |
13:40-14:00 |
Breaking Contact Phenomena of Time-coordinated Non-arcing Relay |
○Noboru Wakatsuki・Hiroshi Honma・Kazumasa Otomo(Ishinomaki Senshu Univ.) |
(10) |
14:00-14:20 |
Influence of source voltage on gaseous phase arc transition in Ag alloy contacts
-- Relation between damage in contact surface and voltage -- |
○Kiyoshi Yoshida(Nippon Inst. of Tech.) |
(11) |
14:20-14:40 |
An experimental study of influences of contact opening speeds on arcing behaviors of silver contacts |
○Makoto Hasegawa(Chitose Inst. of Science and Tech.) |
|
14:40-15:00 |
休憩 ( 20分 ) |
11月14日(水) 午後 <<Session 4>> --Relays-- 座長: Makoto Hasegawa 15:00 - 16:40 |
(12) |
15:00-15:20 |
The Effect of Power Supply Voltage on Make & break Duration of Relays |
○Li Zhenbiao・Zhang Huan(Huazhong Univ. of Science & Tech.)・Makoto Hasegawa(Chitose Inst. of Science and Tech.) |
(13) |
15:20-15:40 |
A Study of Contact Spots on Earthquake Disaster Prevention Relays |
Yoshitada Watanabe・○Yuichi Hirakawa(Kogakuin Univ.) |
(14) |
15:40-16:00 |
Study on Arc of Electromagnetic Relay Contacts Opening a DC Low Current Resistive Circuit with a Constant Velocity |
Guofu Zhai・○Xue Zhou(Harbin Inst. of Tech.) |
(15) |
16:00-16:20 |
The analysis of electromagnetic relay
-- Dynamic characteristics taking into account uniform constant magnetic field's disturbance -- |
○Guofu Zhai・Qiya Wang・Wanbin Ren(Harbin Inst. of Technology) |
(16) |
16:20-16:40 |
Nonlinear vibration characteristics of beam structure in electromagnetic relay |
○Wanbin Ren・Yinghua Chen・Guofu Zhai(Harbin Inst. of Tech.) |
11月15日(木) 午前 <<Session 5>> --Material-- 座長: Isao Minowa 09:10 - 10:10 |
(17) |
09:10-09:30 |
Galvanically Deposited Gold Layers for Switching Contacts in High Temperature Ambient |
○Werner Johler(Tyco Electronics Logistics AG) |
(18) |
09:30-09:50 |
Electrorheology of Acrylic Rubber and Lead Zirconate Titanate |
○N. Tangboriboon(Kasetsart Univ.)・A. Sirivat・S. Wongkasemjit(Chulalongkorn Univ.) |
(19) |
09:50-10:10 |
Degradation phenomenon of electrical contacts by hammering oscillating mechanism
-- Relation to sliding contact mechanism -- |
○Shin-ichi Wada・Taketo Sonoda・Hiroshi Amao・Yasuo Takahashi・Mitsuo Kikuchi・Hiroaki Kubota(TMC System)・Koichiro Sawa・Kei Koga・Ryo Nishioka(Keio Univ.) |
|
10:10-10:25 |
休憩 ( 15分 ) |
11月15日(木) 午前 <<Session 6>> --Fundamentals-- 座長: Werner Johler 10:25 - 11:45 |
(20) |
10:25-10:45 |
Contact Resistance Characteristics of Complex Structure Contacts for Contaminated Printed Circuit Board in SO2 Environment |
○Terutaka Tamai・Yasushi Saitoh(Mie Univ.)・Yasuhiro Hattori(AutoNetwork Technologies) |
(21) |
10:45-11:05 |
Frequency dependence of electrical nonlinear distortion by heat oscillation on a two dimensional metal bridge |
○Isao Minowa(Tamagawa Univ.) |
(22) |
11:05-11:25 |
Effect of change in the time of charging voltage on spark discharge from a metal disk |
○Hajime Tomita(National Inst. of Occupational Safety and Health) |
(23) |
11:25-11:45 |
A Method for Vibration Resistance Optimization of Irregular-shape Beam Structure Basing on FEM and SQP |
Yinghua Chen・○Wanbin Ren・Guofu Zhai(Harbin Inst. of Tech.) |
|
11:45-13:00 |
休憩 ( 75分 ) |
11月15日(木) 午後 <<Session 7>> --Modeling-- 座長: Noboru Morita 13:00 - 14:40 |
(24) |
13:00-13:20 |
A Study on Heat Analysis for Breaking Contact with Low Velocity (Part 2)
-- Influence of Holder Structure on Temperature Rise of Electrode (Part 2) -- |
○Kazuaki Miyanaga・Yoshiki Kayano(Akita Univ.)・Tasuku Takagi(Em. Prof. Tohoku Univ.)・Hiroshi Inoue(Akita Univ.) |
(25) |
13:20-13:40 |
3-D Finite Element Analysis of Dynamic Characteristics of Twin-Type Relay Interfered by Uniform Constant Magnetic Field |
Guofu Zhai・Wenying Yang・○Xue Zhou(Harbin Inst. of Tech.) |
(26) |
13:40-14:00 |
Simulation and Experimental Study of Arc Motion in a Low-Voltage Circuit Breaker Considering Wall Ablation |
Qiang Ma・Mingzhe Rong(Xi'an Jiaotong Univ.)・Anthony B. Murphy(CSIRO Industrial Physics)・○Yi Wu・Tiejun Xu(Xi'an Jiaotong Univ.)・Fei Yang(CSIRO Industrial Physics) |
(27) |
14:00-14:20 |
Thermal Analysis of AC Contactor Using Thermal Network Finite Difference Analysis Method |
○Chunping Niu・Degui Chen・Xingwen Li・Weixiong Tong・Yingsan Geng(Xi'an Jiaotong Univ.) |
(28) |
14:20-14:40 |
Simulation of SF6 arc characteristcs concerning different pressure boundary condition |
Jian Zhang・Shenli Jia・Xingwen Li・○Zongqian Shi・Lijun Wang(Xi'an Jiaotong Univ.) |
|
14:40-15:00 |
休憩 ( 20分 ) |
11月15日(木) 午後 <<Session 8>> --Contactors & Breakers-- 座長: Koichiro Sawa 15:00 - 16:20 |
(29) |
15:00-15:20 |
An Improved Method to Measure Current Density Distribution in the Root of a Moving Arc at the Cathode Surface |
Tiejun Xu・Mingzhe Rong・Yi Wu・○Xiaohua Wang・Qiang Ma・Jianjun Yao(Xi'an Jiaotong Univ.) |
(30) |
15:20-15:40 |
Analysis and Optimization for AC Contactor with Feedback Controlled Magnet System |
Yingyi Liu・Degui Chen・○Yingsan Geng・Chunping Niu・Liang Ji・Weixiong Tong(Xi'an Jiaotong Univ.) |
(31) |
15:40-16:00 |
Analysis and Optimization for the Operating Mechanism of Air Circuit Breaker |
○Degui Chen・Liang Ji・Yunfeng Wang・Yingyi Liu(Xi’an Jiaotong Univ.) |
(32) |
16:00-16:20 |
The Influence of the Insulation Baffle of Iron Splitter Plates on Arc Behavior |
○Xingwen Li・Degui Chen(Xi’an Jiaotong Univ.)・Yimin You(Xi'an High Voltage Apparatus Research Institute)・Qian Wang(Applied Materials China) |
|
16:20-16:25 |
閉会 ( 5分 ) |