講演抄録/キーワード |
講演名 |
2022-05-19 13:50
任意形状誘電体解析のためのCP-EP法に基づくFDTD法の3次元問題への拡張 ○竹谷和真・岩本哲弥・柴山 純・山内潤治・中野久松(法政大) EST2022-3 |
抄録 |
(和) |
直交座標系の有限差分時間領域(FDTD)法を用いて曲面などを含む任意形状の誘電体を解析する際には,誘電体表面のモデリングに注意する必要がある.直交座標系を用いると誘電体曲面は階段状になり,精度良く解析するためには空間の刻みを小さく選ばざるを得ない.本稿では,比較的大きな刻み幅でも精度良く任意形状の誘電体を解析することができる2次元のContour-Path Effective-Permittivity (CP-EP)法に基づくFDTD法を3次元問題に拡張する.セル内の誘電体配置を考慮した定式化を行い,各セルに対する実効誘電率を導出する.本手法の妥当性を検討するために,Mieの解析解及び従来の階段近似を用いた場合と比較し,3次元CP-EP法の有効性を実証する. |
(英) |
The conventional finite-difference time-domain (FDTD) method is formulated in the Cartesian coordinate system. The staircase approximation should be used even for the analysis of arbitrarily-shaped dielectric media. As a result, we have to use small meshes to accurately model these media. In this article, we extend the two-dimensional contour-path effective-permittivity (CP-EP) technique to the three-dimensional (3D) problem, in which a reasonably accurate solution can be obtained with larger meshes. The formulation is performed with the position of the dielectric medium being considered in each cell, leading to its effective permittivity. We compare the result from the present technique with the Mie solution and that from the conventional staircase FDTD method to confirm the effectiveness of the 3D CP-EP method. |
キーワード |
(和) |
有限差分時間領域(FDTD)法 / Contour-Path Effective-Permittivity (CP-EP)法 / 実効誘電率 / / / / / |
(英) |
Finite-difference time-domain (FDTD) method / Contour-path effective-permittivity(CP-EP) method / Effective permittivity / / / / / |
文献情報 |
信学技報, vol. 122, no. 37, EST2022-3, pp. 12-17, 2022年5月. |
資料番号 |
EST2022-3 |
発行日 |
2022-05-12 (EST) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EST2022-3 |