講演抄録/キーワード |
講演名 |
2022-03-04 13:45
ブラシレスDCモータのセンサレス駆動法の検討 ○張ヶ谷勇輝・吉田 清(日本工大) EMD2021-17 エレソ技報アーカイブへのリンク:EMD2021-17 |
抄録 |
(和) |
ブラシレスDCモータのロータの磁極位置を検出するホール素子は高温下では正常に動作しないため、高温下で駆動させるときは、位置検出にホール素子を使用しないセンサレス駆動法が望ましい。本研究では、三相ブラシレスDCモータのロータ位置検出にホールセンサを用いず駆動するセンサレス駆動方法の検討を行った。ホールセンサの出力信号に代わってロータ磁極位置情報を出力する回路を構成し、モータの駆動原理やセンサレス位置検出の仕組みが観察できる実験回路・基板を製作した。実験によりホールセンサを利用しないで、モータコイルに発生する誘起電圧からロータの磁極位置を検出し、駆動できることを可能にした。また、各種信号波形の観察やインバータ回路のスイッチング状況を確認できる。 |
(英) |
The three-phase brushless DC motor uses a Hall sensor to detect the position of the magnetic poles of the rotor. However, the Hall sensor has a problem that it does not operate under high temperature conditions. This report describes a sensorless drive method that does not use a hall sensor. Instead of the Hall sensor, a circuit for detecting the magnetic pole position of the rotor was created. Furthermore, we made an experimental circuit and a print board that can observe the driving principle of the motor and the mechanism of position detection without a sensor. In addition, their characteristics and operating waveforms will be explained. |
キーワード |
(和) |
ブラシレスDCモータ / センサレス駆動 / 論理回路 / インバータ / ホール素子 / / / |
(英) |
brushless-motor / sensorless drive / logic circuit / nverter / Hall sensor / / / |
文献情報 |
信学技報, vol. 121, no. 405, EMD2021-17, pp. 13-18, 2022年3月. |
資料番号 |
EMD2021-17 |
発行日 |
2022-02-25 (EMD) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2021-17 エレソ技報アーカイブへのリンク:EMD2021-17 |