講演抄録/キーワード |
講演名 |
2022-03-04 15:55
プラスチック光ファイバの機械加工による光受動部品作製 ○村上裕太・長瀬 亮(千葉工大) EMD2021-22 エレソ技報アーカイブへのリンク:EMD2021-22 |
抄録 |
(和) |
映像コンテンツの高精細化が世界の潮流となっている中,日本では「新4K・8K衛星放送」が始まっている.しかしながら,現在主流となっている同軸ケーブルを使用した配信方式では,電波を受信する際の中間周波数の漏洩電波が原因となり,同一帯域に存在する無線システム等に干渉することが懸念されている.そこで,プラスチック光ファイバ(POF)を利用した光配信方式が提案されているが,いまだ技術的課題が多く存在する.本研究では,POFによる光配信方式を実現するために必要である光分配器の作製を目指し,2つの分岐構造の考案とその加工を試みた.また,作製した分岐構造の光学特性を測定したので報告する. |
(英) |
With the global trend toward high-definition video content, Japan has begun "new 4K/8K satellite broadcasting. However, with the current mainstream distribution method using coaxial cables, there are concerns about interference with wireless systems in the same band due to leakage of intermediate frequencies when receiving radio waves. In order to solve this problem, an optical distribution method using plastic optical fiber (POF) has been proposed, but there are still many technical issues to be solved. In this study, we devised two branching structures and fabricated them in order to fabricate an optical distributor, which is necessary to realize an optical distribution system using POF. We have also measured optical properties of the fabricated branching structures. |
キーワード |
(和) |
プラスチック光ファイバ / 光分配器 / 光分岐構造 / 機械加工 / / / / |
(英) |
plastic optical fiber / optical distributor / optical branching structure / machining / / / / |
文献情報 |
信学技報, vol. 121, no. 405, EMD2021-22, pp. 43-47, 2022年3月. |
資料番号 |
EMD2021-22 |
発行日 |
2022-02-25 (EMD) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2021-22 エレソ技報アーカイブへのリンク:EMD2021-22 |