講演抄録/キーワード |
講演名 |
2021-12-16 10:35
インターディジタル構造とマルチビア構造を用いたメタサーフェス反射器 ~ シミュレーションに基づく設計と評価実験 ~ ○浦上大世(香川高専)・丸山珠美(函館高専)・小野安季良・塩沢隆広(香川高専) MW2021-84 エレソ技報アーカイブへのリンク:MW2021-84 |
抄録 |
(和) |
マッシュルーム構造を持つメタサーフェスにインターディジタル構造とマルチビア構造を導入することにより反射位相を制御する方法を提案した.電磁界シミュレーションにより360°の十分な反射位相の範囲が取れることを明らかにした.次に,提案構造を用いて,波長に比べて近接した距離においた一次放射器(送信アンテナ)からのビームを所望方向に向けるメタサーフェスの設計を行った.メタサーフェスと送信アンテナの距離を十分に取れない場合,メタサーフェス上の入射波の位相が一様とならないため,入射波の位相分布を設計に含める必要がある.そこで,送信アンテナの位相分布を電磁界シミュレーションで求め,これをレイ・トレース法と組み合わせてメタサーフェスを構成する素子の反射位相の仕様を決定し,この反射位相が得られるように各素子の構造を決定した.電波暗室にて,メタサーフェスの指向性測定を行い,試作した反射器の反射ビームが所望の反射角方向に向くことを明らかにした.本結果により,提案した構造と設計法の有効性が確認できた. |
(英) |
The novel patch element shapes with the interdigital and multi-via structures of a mushroom-type metasurface reflector have been proposed for controlling the reflection phases. The reflector with the constant reflection direction, placed in the near field of a transmitting antenna, is designed using these structures. In this case, the design method considering the incident wave phase distribution are required, since the incident wave phases vary according to the position on the metasurface. The parameters of each patch element with the interdigital and multi-via structures are designed to realize the desired reflection phases on the metasurface, determined by combining the simulated incident wave phase distribution and the ray tracing method. The measured directivity of the prototype metasurface in our anechoic chamber shows the good agreement between the measured and designed reflection direction. The effectiveness of the proposed structure and design method is confirmed from this measurement result. |
キーワード |
(和) |
反射器 / メタサーフェス / メタマテリアル / 有限要素法 / レイ・トレース法 / / / |
(英) |
Reflector / Metasurface / Metamaterial / Finite element method / Ray tracing method / / / |
文献情報 |
信学技報, vol. 121, no. 303, MW2021-84, pp. 1-6, 2021年12月. |
資料番号 |
MW2021-84 |
発行日 |
2021-12-09 (MW) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2021-84 エレソ技報アーカイブへのリンク:MW2021-84 |
|