講演抄録/キーワード |
講演名 |
2021-12-10 16:00
二重構造熱アシスト磁気記録でのビットパターン媒体ドットの厚さと直径の影響 ○グリーブス サイモン・山根 輝・田中陽一郎(東北大) MRIS2021-15 エレソ技報アーカイブへのリンク:MRIS2021-15 |
抄録 |
(和) |
二重構造のビットパターン記録媒体は、熱アシスト磁気記録用に最適化されている。各ドットには2つの個別の記録構造が含まれていたため、2ビットの情報を格納できた。最適化された条件は、記録構造のドット直径と厚さでした。高温の磁化熱安定性の分析により、記録磁界が弱い下部により厚い記録構造、そして上部のより薄い構造を備えた設計を示唆した。記録シミュレーションは、最適な設計が9 Tbit/in2を超えるユーザー面積記録密度の可能性があることを示した。 |
(英) |
Dual structure bit patterned media were optimised for heat assisted magnetic recording. Each dot contained two discrete recording structures and was therefore able to store two bits of information. The optimised parameters were the dot diameter and the thicknesses of the recording structures. Analysis of the thermal stability of the magnetisation at elevated temperatures suggested a design with a thicker recording structure on the bottom, where the head field was weaker, and a thinner structure on the top. Recording simulations showed that the optimal design could lead to user areal recording densities in excess of 9 Tbit/in2. |
キーワード |
(和) |
加熱記録 / パターン媒体 / / / / / / |
(英) |
HAMR / patterned media / / / / / / |
文献情報 |
信学技報, vol. 121, no. 291, MRIS2021-15, pp. 32-37, 2021年12月. |
資料番号 |
MRIS2021-15 |
発行日 |
2021-12-03 (MRIS) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MRIS2021-15 エレソ技報アーカイブへのリンク:MRIS2021-15 |