講演抄録/キーワード |
講演名 |
2021-06-21 09:25
ミアンダシートを用いた2次元導波路電力伝送 ○増田祐一(東大)・平野義明・根岸毅人(帝人)・篠田裕之(東大) SRW2021-2 |
抄録 |
(和) |
これまでのシート状導波路による無線電力伝送の研究においては6.78 MHzの周波数利用を前提とし,ミアンダ状の表面導体パターンを用いることで10 m程度の範囲に渡り実用的な効率での給電が可能であることが電磁界シミュレーションにて確認されている.ミアンダシートを用いた無線電力伝送の実現可能性調査が本稿の目的である.伝搬損失だけでなく,製造・敷設し易さも考慮しシートを試作・評価した.また,高いEMC性能が期待できるWaveguide-Ring Resonator 構造を受電カプラに採用し,電磁界シミュレーションにて70 dB以上のカプラ内外における電界強度比を確認した.試作カプラでは,シート入力電力とカプラ出力電力の比は-3.584 dB (43.8 %)となり,シート終端部での出力電力を回収する前提で試算した給電効率は74.6 %であった. 長さ10 mのミアンダシートを前提とした場合では,シート全域で66.6 %以上の給電効率となる試算結果を得た. |
(英) |
In the previous work of the wireless power transfer with a sheet-like waveguide, a simulated results showed the practical power transmission efficiency by using about 10-m meander-shaped sheet with a 6.78 MHz operating frequency. This paper shows the feasibility study of the wireless power transfer by using meander-shaped sheet. The prototype sheet is evaluated in terms of the propagation loss, the manufacturing cost and ease of installation. A waveguide-ring resonator coupler, which has high electromagnetic compatibility (EMC) performance, is also evaluated in terms of safety and efficiency. Simulates results shows the 70 dB electrical field strength ratio between inside/outside of the WRR coupler. The ratio of supplied power to coupler output power of the prototype coupler is -3.584 dB (43.8 %). In addition, the power transmission efficiency is estimated to be 74.6 % based on the assumption that the power is recovered at the termination of the sheet. |
キーワード |
(和) |
無線電力伝送 / 二次元通信 / EMC / Waveguide-Ring Resonator / resonant coupler / / / |
(英) |
Wireless Power Transmission / Two-dimensional Communication / EMC / Waveguide-Ring Resonator / / / / |
文献情報 |
信学技報, vol. 121, no. 70, SRW2021-2, pp. 7-12, 2021年6月. |
資料番号 |
SRW2021-2 |
発行日 |
2021-06-14 (SRW) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
SRW2021-2 |