講演抄録/キーワード |
講演名 |
2021-03-08 16:15
接触境界の表面粗さとトルク値がコネクタ高周波特性に与える影響に関する基礎検討 ○上田浩行・鍛治秀伍・藤本大介・キム ヨンウ・林 優一(奈良先端大) EMD2020-37 エレソ技報アーカイブへのリンク:EMD2020-37 |
抄録 |
(和) |
コネクタの摺動や振動により接触表面に摩耗が発生し、接触抵抗が増加することで、信号伝送性能が劣化するなどの悪影響を引き起こす問題が報告されている。一方、金属は塑性変形するため、接触表面が粗い金属に対して十分な接触荷重をかけることで信号伝送性能を維持できる可能性がある。本稿では、コネクタ接触部における接触荷重を制御し、コネクタを含む伝送線路の特性を評価可能な実験セットアップを構築し、接触表面が劣化した際にも良好な伝送特性を維持するための接触加重について検討を行う。 |
(英) |
Wear occurs on the contact surface due to sliding and vibration of the connector. This increases the contact resistance, which has been reported to cause effects such as degradation of signal transmission performance. On the other hand, since metals deform plastically, applying sufficient contact force to metals with rough contact surfaces has the potential to maintain the signal transmission performance. In this paper, we build an experimental setup that can control the contact resistance at the contact boundary and evaluate the characteristics of the transmission line including the connector. Using this setup, we aim to show the contact force required to suppress the degradation of signal transmission. |
キーワード |
(和) |
コネクタ / 接触力 / 接触抵抗 / 表面粗さ / Time domain reflectometry / / / |
(英) |
Connector / Contact force / Contact resistance / Contact roughness / Time domain reflectometry / / / |
文献情報 |
信学技報, vol. 120, no. 425, EMD2020-37, pp. 40-43, 2021年3月. |
資料番号 |
EMD2020-37 |
発行日 |
2021-03-01 (EMD) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2020-37 エレソ技報アーカイブへのリンク:EMD2020-37 |